Yamaha DM 2000 Version 2 Bedienungsanleitung

Studio Manager

for V1.1

Owner’s Manual

Studio Manager for DM2000 V1.1—Owner’s Manual

Important Information

Exclusion of Certain Liability

Manufacturer, importer, or dealer shall not be liable for any incidental damages including

personal injury or any other damages caused by improper use or operation of Studio Man-

ager for DM2000.

Yamaha makes no representations or warranties with regard to the use of the software and

documentation and cannot be held responsible for the results of the use of this manual and

the software.

Trademarks

Macintosh is a registered trademark of Apple Computer, Inc. Windows is a registered trade-

mark of Microsoft Corporation. OMS is a registered trademark of Opcode Systems, Inc.All

other trademarks are the property of their respective holders and are hereby acknowledged.

No part of the Studio Manager for DM2000 software or its documentation may be repro-

duced or distributed in any form or by any means without the prior written authorization

of Yamaha Corporation.

Yamaha Web Site

Information about Studio Manager for DM2000, related products, and other Yamaha pro-

fessional audio equipment is available on the Yamaha Professional Audio Web site at:

<http://www.yamaha.co.jp/product/proaudio/homeenglish/navi/index.htm>.

Speciﬁcations and external appearance subject to change without notice.

Studio Manager for DM2000 V1.1—Owner’s Manual

Contents

1 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Starting Studio Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Quitting Studio Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Configuring Studio Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Synchronizing Studio Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Working with Sessions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2 Console Window . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Input Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Master Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Output Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Remote Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3 Selected Channel Window . . . . . . . . . . . . . . . . . . 10

Input Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Bus Outs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Aux Sends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Matrix Sends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Stereo Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Remote Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4 Library Window . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

5 Patch Editor Window . . . . . . . . . . . . . . . . . . . . . . 22

Input Patch Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Output Patch Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Insert Patch Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Effect Patch Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Direct Out Patch Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

6 Surround Editor Window . . . . . . . . . . . . . . . . . . . 27

7 Effect Editor Window . . . . . . . . . . . . . . . . . . . . . . 28

8 GEQ Editor Window . . . . . . . . . . . . . . . . . . . . . . . 29

9 Timecode Counter Window . . . . . . . . . . . . . . . . . 30

10 Keyboard Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . 31

File Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Windows Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

1Chapter 1—Getting Started

Studio Manager for DM2000 V1.1—Owner’s Manual

1 Getting Started

Starting Studio Manager

Windows: Click the Start button and then click Programs–>YAMAHA Studio Manager for

DM2000–>Studio Manager for DM2000.

Macintosh: Open the Studio Manager for DM2000 folder and double-click “SM_DM2K.”

If a DM2000 is detected while Studio Manager starts up, the Synchronization dialog box

appears, from which you can choose to transfer the settings of the DM2000 to Studio Man-

ager or vice versa. See “Synchronizing Studio Manager” on page 3 for more information. If

no DM2000 is detected, a new Console window opens.

The ONLINE indicator is displayed while Studio Manager is connected to a

DM2000. When no DM2000 is detected, the OFFLINE indicator is displayed.

Quitting Studio Manager

Choose Exit (Quit on the Macintosh) from the File menu.

If there are no unsaved changes, all windows close and Studio Manager quits. If there are

unsaved changes, a message asking if you want to save the changes appears. Click Yes to save

the changes and quit, click No to quit, or click Cancel to cancel the operation. Studio Man-

ager can also be quit by clicking the Console window’s Close button.

Conﬁguring Studio Manager

Selecting Ports

In order to use Studio Manager, you must specify the input and output ports that Studio

Manager should use to communicate with the DM2000.

Windows: Choose System Setup from the File menu,and specify the input and output ports

on the Setup dialog box, as shown below.

Macintosh: Choose Select OMS Ports from the File menu, and specify the input and output

ports (device names set in OMS Studio Setup) on the Setup dialog box, as shown below.

OMS Studio Setup can be opened directly from Studio Manager by selecting OMS Studio

Setup from the File menu.

Note: This version of Studio Manager supports DM2000 System SoftwareV1.10 or later. If used

with an earlier version, some functions (e.g., the Library Undo function) may not work properly.

Note: Choose OMS MIDI Setup from the File menu, and make sure that the “Run MIDI in

Background” option is on.

Configuring Studio Manager 2

Studio Manager for DM2000 V1.1—Owner’s Manual

System Setup

To open the Setup window, choose System Setup from the File menu.

This is the Windows Setup window.

This is the Macintosh Setup window

Input Port/Output Port: (Windows only) These pop-up menus are used to select the

ports with which Studio Manager communicates with the DM2000.

Console Device ID: Studio Manager can control any one of up to eight DM2000s, each

with its own exclusive ID. Select the ID of the DM2000 that you want to control.

Channel Select: These options determine whether or not channel selection is linked.

When the PC–>Console option is on, selecting a channel on Studio Manager selects the

same channel on the DM2000.When the Console–>PC option is on, selecting a channel on

the DM2000 selects the same channel on Studio Manager.

Conﬁrmation: These options determine whether or not a conﬁrmation dialog box

appears when storing, recalling, or patching.

Layer Select: These options determine whether or not Layer selection is linked.When the

PC–>Console option is on, selecting a Layer on Studio Manager selects the same Layer on

the DM2000.When the Console–>PC option is on, selecting a Layer on the DM2000 selects

the same Layer on Studio Manager.

3Chapter 1—Getting Started

Studio Manager for DM2000 V1.1—Owner’s Manual

Synchronizing Studio Manager

If a DM2000 is detected while Studio Manager starts up, or while Studio Manager is up and

running, the Synchronization dialog box shown below appears.

All Lib: This option determines whether or not Scene and Library data is synchronized.

Console–>PC: Click this button to transfer the settings of the DM2000 to the current Stu-

dio Manager Session.

PC–>Console: Click this button to transfer the settings of current Studio Manager Ses-

sion to the DM2000.

Cancel: Click this button to leave the DM2000 and current Studio Manager Session

unsynchronized.

You can resynchronize the system at any time by choosing Re-synchronize from the Syn-

chronization menu.

Working with Sessions

A Studio Manager Session consists of all DM2000 mix settings, including Scene and library

data.

• To create a new Session, choose New Session from the File menu.

• To open a previously saved Session, choose Open Session from the File menu.

• To save the current Session, choose Save Session from the File menu.

• To save the current Session with a new name, choose Save Session as from the File menu.

Only one Session can be open at a time, so when you create a new Session, or open a previ-

ously saved Session, the message “This operation will purge the current session” appears. If

there are no unsaved changes, or you do not want to save, click OK. If Studio Manager is

ofﬂine, the Session is loaded. If Studio Manager is online, the Session is loaded and the syn-

chronization dialog box appears.

Note: Do not operate the DM2000 while synchronization is in progress.

Note: In order to save the current Automix, or the settings of an optional Y56K card, in a Ses-

sion, you must resynchronize Studio Manager beforehand (Console–>PC).

Note: In order to protect the communication port used by Studio Manager, DM2000 commu-

nication settings (e.g., MIDI, Remote Layer, Machine Control) are not affected by PC–>Con-

sole synchronization operations.

Console Window 4

Studio Manager for DM2000 V1.1—Owner’s Manual

2 Console Window

Studio Manager’s Console window displays 24 channel strips and a master section. When

an Input Channel Layer is selected,24 Input Channels are displayed.When the Master Layer

is selected, the Bus Out, Aux Send, and Matrix Send channels are displayed. And when a

Remote layer is selected, Remote Channels are displayed.

Many functions can be operated from here by clicking and dragging the various controls

and parameters. This is explained in the following sections.

Channels can be viewed in more detail on the Selected Channel window. See page 10 for

more information.

5Chapter 2—Console Window

Studio Manager for DM2000 V1.1—Owner’s Manual

Input Channels

A SOURCE parameter

This parameter is used to select an Input source. To select an

Input source, click the parameter and choose from the list that

appears.

B Routing buttons

These buttons are used to route the Input Channel to the Bus

Outs.

C STEREO button

This button is used to route the Input Channel’s signal to the

Stereo Out.

D DIRECT button

This button turns on and off the Input Channel’s routing to its

Direct Out.

E Direct Out parameter

This parameter is used to select the Direct Out destination. To

select a destination, click the parameter and choose from the list

that appears.

F PHASE button

This button is used to reverse the signal phase of the channel.

G INSERT button

This button is used to turn on and off the Input Channel’s

Insert.

H GATE button

This button is used to turn on and off the Input Channel’s Gate.

I Gate open/close indicators

These indicators display whether the Gate is open (green) or

closed (red).

J Gate threshold

This displays the Gate Threshold, which can be set by dragging.

K COMP button

This button is used to turn on and off the Input Channel’s Com-

pressor.

L Compressor curve

This display shows the Compressor’s curve.

M EQ button

This button is used to turn on and off the Input Channel’s EQ.

N EQ curve

This display shows the Equalizer’s curve, which can be set by

dragging.

O DELAY button

This button is used to turn on and off the Input Channel’s Delay

function.

Input Channels 6

Studio Manager for DM2000 V1.1—Owner’s Manual

P Delay parameter

This parameter is used to set the delay time of the Delay function. Delay times can be set by

dragging.

Q Channel number

This is the channel number.

R AUX section

These controls are used to set the levels of the Aux Sends. To set an Aux Send level,

drag its bar or click a point along the length of the bar. To turn an Aux Send on or

off, click its number.

The following table shows how the Aux Send controls appear depending on the

Aux Send On/Off and Pre/Post settings. Aux Sends can be set to pre-fader or

post-fader on the Selected Channel window (see “AUX SEND section” on

page 11).

S Pan/Aux Send display

This display shows the stereo or surround pan position or, while setting an Aux Send, the

Aux Send level in dB.

T PAN control

This control is used to set the Input Channel’s stereo or surround pan position. When the

PAN CONTROL in the Master Section is set to “STEREO,” the Pan control appears as a

rotary control, and when set to “SURR,” the control appears as dot on a pan graph. The sur-

round pan position can be set by dragging the dot. If you click on the pan graph while hold-

ing down the Shift key, the pan immediately jumps to the new position.

U LFE control

When 5.1 Surround mode is selected, this control is used to set the surround

LFE Channel level. It appears when the PAN CONTROL in the Master Section

is set to“SURR.”To set the LFE level, drag the end of its bar or click a point along

the length of the bar.

V AUTO button

This button displays the Automix status of the Input Channel.

W SELECT button

This button is used to select the Input Channel.

X SOLO button

This button solos the Input Channel. It appears orange while the channel is soloed.

Y ON button

This button turns the Input Channel on and off. It appears orange while the channel is on.

Z Short channel name

This is the channel’s short name. To edit the name, click it and type.

a Channel fader

This is the Input Channel’s fader.

b Channel meter

This meter displays the signal level of the Input Channel.

Aux Send status Appearance

On or off but no level set Dark blue bar

Off, pre-fader Green bar outline displays level

On, pre-fader Green bar displays level

Off, post-fader Orange bar outline displays level

On, post-fader Orange bar displays level

7Chapter 2—Console Window

Studio Manager for DM2000 V1.1—Owner’s Manual

Master Section

A ONLINE status indicator

This indicator shows whether Studio Manager is online or

ofﬂine.

B Meters

These meters display the output level of the Stereo Out when

PAN CONTROL is set to “STEREO,” or the Bus Outs used for

surround processing when PAN CONTROL is set to “SURR.”

The Meters in 3-1 and 5.1 Surround modes are shown below.

C LAYER buttons

These buttons are used to select the Layers.

D PAN CONTROL

These buttons are used to select either“STEREO”(Stereo mode)

or “SURR” (Surround mode). The Pan control on the Input

Channels is a rotary control when “STEREO” is selected, and a

dot on a pan graph when “SURR” is selected.

E AUTO button

This button displays the Automix status of the Stereo Out.

F SELECT button

This button is used to select the Stereo Out. If it’s clicked while a

Remote Layer is selected, it will light up, but the Stereo Out will

not appear in the Selected Channel window.

G ON button

This button turns the Stereo Out on and off. It appears orange

while the Stereo Out is on.

H Channel fader

This is the Stereo Out fader.

3-1 5.1

Andere Handbücher für DM 2000 Version 2

Inhaltsverzeichnis

Andere Yamaha Software Handbücher

Yamaha

Yamaha QY100 Data Filer Bedienungsanleitung

Yamaha

Yamaha MOTIF6 Voice Editor Bedienungsanleitung

Yamaha

Yamaha S90 Bedienungsanleitung

Yamaha

Yamaha mLAN Driver Bedienungsanleitung

Yamaha

Yamaha Synth Bedienungsanleitung

Yamaha

Yamaha disklavier MX-100A Bedienungsanleitung

Yamaha

Yamaha VL Bedienungsanleitung

Yamaha

Yamaha Add-On Effects Bedienungsanleitung

Yamaha

Yamaha LS9-16 Bedienungsanleitung

Yamaha

Yamaha CL3 Bedienungsanleitung

Yamaha

Yamaha QY70 Bedienungsanleitung

Yamaha

Yamaha ASIO DirectKS Bedienungsanleitung

Yamaha

Yamaha PM5D Bedienungsanleitung

Yamaha

Yamaha Loopfactory AN200 Bedienungsanleitung

Yamaha

Yamaha AE041 Bedienungsanleitung

Yamaha

Yamaha 03DVEK Bedienungsanleitung

Yamaha

Yamaha YC-3B Bedienungsanleitung

Yamaha

Yamaha CVP-403PE Bedienungsanleitung

Yamaha

Yamaha DME Designer Bedienungsanleitung

Yamaha

Yamaha HUB Bedienungsanleitung

Yamaha

Yamaha MOTIF RACK Music System Bedienungsanleitung

Yamaha

Yamaha 02R96 Version 2 Bedienungsanleitung

Yamaha

Yamaha LS9-16 Bedienungsanleitung

Yamaha

Yamaha DM 1000 Bedienungsanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

HP ProLiant BL420c Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung