Yamaha NS-AP6506E Bedienungsanleitung

NS-AP6500M/NS-AP6506E

HOME CINEMA SPEAKER PACKAGE

CONTENTS

CONSUMER PRECAUTIONS ............................................................................ 2

UNPACKING .......................................................................................................3

SETTING UP THE SPEAKERS ..........................................................................4

CONNECTIONS TO THE RECEIVER ................................................................6

SPEAKER PLACEMENT .................................................................................... 7

SPECIFICATIONS ...............................................................................Back cover

OWNER’S MANUAL

CONSUMER PRECAUTIONS

Read these precautions carefully before operating your NS-AP6500 speakers.



Since these speakers can be wall mounted, it is essential that they are firmly secured. Be sure to consult a

reliable source about the best type of hanger for your particular wall’s construction. Secure installation is the

purchaser’s responsibility.



Do not attach them to thin plywood or soft wall surface materials as the screws may tear free, causing the

speakers to fall and be damaged, or result in personal injury.



Do not fasten the speakers to walls with nails, adhesives, or other unsafe hardware. Long-term use and

vibrations may cause them to pull free.



Do not place the speakers where they are liable to be knocked over or struck by falling objects. Stable

placement will also ensure better sound performance.



Placing the speakers on the same stand or shelf as a turntable can result in feedback.



This speaker features a magnetically shielded design, but there is still a chance that placing it too close to a

TV set might impair picture color. Should this happen, move the speaker away from the TV set.



Never touch the woofer or tweeter units with your hands or expose them to excessive physical shock. If they

are dented or bent, the sound will be distorted.



Lower the power amplifier / receiver volume control before changing input sources. Never change input

sources (for example, FM to CD) at high listening levels. Always turn the receiver / amplifier unit off when

installing or removing input cables.



Anytime you note distortion, reduce the volume control on your power amplifier / receiver to a lower setting.

Never allow your power amplifier to be driven into “clipping”.



Do not attempt to clean the speakers with chemical solvents as this might damage the finish. To clean wipe

with a dry, soft cloth.



To prevent the enclosure from warping or discoloring, do not place the speakers where they will be exposed to

direct sunlight or excessive humidity.



To prevent the speakers from falling over, select a location which is flat and stable.



To avoid accidents resulting from tripping over loose speaker cables and to prevent the speakers from falling,

fix the speaker cables to the wall, etc.



Secure placement or installation is the owner’s responsibility.

YAMAHA shall not be liable for any accident caused by improper placement or installation of speakers.

UNPACKING

After unpacking, check that following items are contained.

Center speaker x 1

(NS-AP6500C)

Surround speaker x 3

(NS-AP6500S)

Spacing pads for surround speakers x 12

Fasteners for the center speaker x 4

Speaker cable (120 ft) x 1

Front speaker x 2

(NS-AP6500F)

Wall mounting the surround speakers

When mounting the speakers on a wall, attach one of the spacing pads provided near each of the corners on

the rear surface of the speaker to prevent the speaker cable from being caught between the wall and the

speaker.

Fasten screws into a firm wall or wall support as shown in the figure, and hang the holes of the mounting

bracket on the protruding screws.

Make sure that the screws are securely caught by the narrow sections of the “key hole” opening.

WARNING

 Each speaker weighs 2.6 lbs (1.2 kg). Do not mount the speakers on thin plywood or a wall with soft surface

material, since the screws may pull away from the surface and fall. This will damage the speakers and can

cause personal injury.

 Do not mount the speakers on a wall with nails, adhesives, or any other unstable hardware. Long-term use

and vibrations may cause them to fall.

 To avoid accidents resulting from tripping over loose speaker cords, they should be affixed to the wall or floor

molding.

 Secure installation is the purchaser's responsibility.

SETTING UP THE SPEAKERS

Wall / wall support

Min

7/8”

7/32”

Tapping screw

(Available at the hardware store)

When using speaker brackets to mount the

speakers on a wall or ceiling, it is strongly

recommended that safety wire, which may be

included with the bracket, be used between the

speaker and the bracket to prevent the speaker

from falling.

5-7/8”

(150mm)

A screw with a diameter of

1/4” can be used.

(Hole depth: 9/32”)

You can also use the screw hole on the back of the

speaker for installing the speakers on

commercially available speaker brackets.

 Positioning the center speaker

Place the center speaker on top of the TV, on the floor in front of the TV, or inside the TV rack so that it is stable.

When placing the speaker on top of the TV, put the provided fasteners at four points on both the bottom of the

speaker and on top of the TV to prevent the speaker from falling.

Notes



Do not place the speaker on top of the TV if the area is smaller than the bottom area of the speaker. The

speaker may fall and might cause personal injury.



Though this speaker is a magnetically shielded type, there may be some influence on a TV picture depending

on the type of TV or the placement of the speaker. In such a case, place the speaker apart from TV so that

there is no influence on TV picture.

WARNING

 To avoid accidents resulting from tripping over loose speaker cords, they should be affixed to the wall or floor

molding.

 Secure installation is the purchaser's responsibility.

Fasteners

Speaker on top of the TV

Speaker inside

the TV rack

TV set

CONNECTIONS TO THE RECEIVER

CONNECTIONS



Check to make sure that the power has been turned off before making connections.



Connect the (+) terminal of the amplifier to the (+) terminal of the speaker.

Connect the (–) terminal of the amplifier to the (–) terminal of the speaker.



Reversing polarity (+/–) will result in unnatural sound reproduction.

PROCEDURE

For connections, keep the speaker cords as short as possible. Do not bundle or roll up the excess part of the

cords. If the connections are faulty, no sound will be heard from the speakers. Make sure that the + and – polarity

markings of the speaker cords are observed and set correctly. If these cords are reversed, the sound will be

unnatural and lack bass.

How to Connect:

1Press and hold the terminal’s tab.

2Insert the bare wire into the terminal hole.

[Remove approx. 10 mm (3/8”) insulation from the speaker cords.]

3Release your finger from the tab to allow it to lock securely on the bare wire end.

4Test the firmness of the connection by pulling lightly on the cord at the terminal.

Note



Do not let the bare speaker wires touch each other as this could damage the speaker, the amplifier, or both.

Make sure the lead portions of

the speaker cable are not

exposed outside of the

connectors.

No Good

10 mm

Good

SPEAKER PLACEMENT

This speaker system consists of front, center and surround speakers.

— Front speaker placement should be separated by a distance of 6–10ft. If they are placed too close together,

there will be a reduction in the stereo effect. Conversely, If placed too for apart, the so called “middle-

omission” effect will occur and the vocal center fill will be lost. Height of the speaker should be at least at ear

level.

— Center channel speakers should be placed centered above or below the TV.

— Surround speakers should ideally be placed behind the listening area, at least as far apart as the front

speakers and up to 2 additional feet apart per side. The height of the speaker should be at a minimum of ear

level or preferably somewhat higher.

Left Front Speaker Right Front Speaker

Left Surround Speaker Right Surround Speaker

Center Speaker

–

10 feet

up to approx

2 feet more

up to approx

2 feet more

LISTENING AREA

Surround Back Speaker

YAMAHA ELECTRONICS CORPORATION, USA

6660 ORANGETHORPE AVE.,

BUENA PARK, CA 90620

http://www.yamaha.com/yec

Phone: 1-800-492-6242

P/N 430046 Printed in China

SPECIFICATIONS

Type 2-way Bass Reflex

Speaker

Front 6.5" woofer + 3/4" dome tweeter

Center 3" woofer x 2 + 3/4" dome tweeter

Surround 3" woofer x 1 + 1/2" balanced dome tweeter

Frequency Range

Front 55Hz - 35KHz

Center 100Hz - 35KHz

Surround 100Hz - 35KHz

Impedance 6 ohms

Nominal Input 30 W

Maximum Input 100 W

Sensitivity (dB/2.83v. 1m)

Front 85dB

Center 82dB

Surround 82dB

Crossover Frequency

Front 4kHz

Center 5kHz

Surround 5kHz

Dimension (H x W x D)

Front 13" x 7-1/2" x 7-1/8" (330 x 190 x 180 mm)

Center 4-7/8" x 14-5/8" x 4-3/4" (125 x 370 x 120 mm)

Surround 8-1/4" x 5-1/2" x 3-3/4" (210 x 138 x 95 mm)

Weight

Front 8.8 lbs (4.0 kg)

Center 5.3 lbs (2.6 kg)

Surround 2.6 lbs (1.2 kg)

Magnetic Shielding

Front Yes.

Center Yes.

Surround No.

*Specifications subject to change without notice due to product improvements.

Inhaltsverzeichnis

Andere Yamaha Sprecher Handbücher

Yamaha

Yamaha MusicCast WX-030 Bedienungsanleitung

Yamaha

Yamaha STAGEPASS 250M Bedienungsanleitung

Yamaha

Yamaha DSR112 Bedienungsanleitung

Yamaha

Yamaha ASP-S1 Bedienungsanleitung

Yamaha

Yamaha YST-M10 Bedienungsanleitung

Yamaha

Yamaha NX-N500 Bedienungsanleitung

Yamaha

Yamaha Stagepas 300 Bedienungsanleitung

Yamaha

Yamaha NS-AW150 Bedienungsanleitung

Yamaha

Yamaha YSP-2200 Bedienungsanleitung

Yamaha

Yamaha NS-F160 Bedienungsanleitung

Yamaha

Yamaha NS-BP101 Bedienungsanleitung

Yamaha

Yamaha DXR10 Bedienungsanleitung

Yamaha

Yamaha YST-M8 Bedienungsanleitung

Yamaha

Yamaha VXC4 Bedienungsanleitung

Yamaha

Yamaha NX-P100 Bedienungsanleitung

Yamaha

Yamaha PSG-01S Bedienungsanleitung

Yamaha

Yamaha HS8S Bedienungsanleitung

Yamaha

Yamaha VXC4 Bedienungsanleitung

Yamaha

Yamaha VS6 Bedienungsanleitung

Yamaha

Yamaha AST-S1 Bedienungsanleitung

Yamaha

Yamaha NS-C210BL - Bass-Reflex Center Speaker Bedienungsanleitung

Yamaha

Yamaha TRS-MS05 Montageanleitung

Yamaha

Yamaha HS series Bedienungs- und Wartungshandbuch

Yamaha

Yamaha NS-F210 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung