Yamaha Aventage RX-A820 Kurzanleitung

English

Español

Easy Setup Guide

Guía de configuración sencilla

AV Receiver/Receptor AV

RX-A820_esg_RL_cover1.fm Page 1 Monday, February 13, 2012 3:34 PM

Black process 45.0° 240.0 LPI

En 1

Check that the following accessories are supplied with the product.

The following cables (not supplied) are required to build the system described in this

document.

• Speaker cables (depending on the number of speakers)

• HDMI cable (x2)

• Audio pin cable (x1)

• Digital optical cable (x1) (not required if your TV supports ARC [Audio Return Channel])

1Preparation

Accessories

Remote control Batteries

(AAA, R03, UM-4) (x2)

Insert the batteries the right way round.

AM antenna FM antenna YPAO microphone

Power cable CD-ROM

(Owner’s Manual)

Safety Brochure Easy Setup Guide

• The illustrations of the main unit and remote control used in this guide are of the U.S.A. model, unless

otherwise specified.

*The supplied FM antenna

varies depending on the

region of purchase.

*The supplied power cable

varies depending on the

region of purchase.

Cables required for connections

UAB

This document explains how to set up a 5.1- or 7.1-channel system and

play back surround sound from a BD/DVD on the unit.

To reduce the impact on natural resources, the Owner’s Manual for this product is

supplied on CD-ROM. For more information about this product, refer to the

Owner’s Manual on the supplied CD-ROM.

PDF versions of this guide and “Owner’s Manual” can be downloaded from the

following website.

http://download.yamaha.com/

Easy Setup Guide

English

AV Receiver

RX-A820_esg_C.fm Page 1 Thursday, March 1, 2012 3:33 PM

Black process 45.0° 240.0 LPI

2En

Set up the speakers in the room using the following diagram as a reference.

For information on other speaker systems, refer to “Owner’s Manual”.

1Front speaker (L)

2Front speaker (R)

3Center speaker

4Surround speaker (L)

5Surround speaker (R)

6Surround back speaker (L)

7Surround back speaker (R)

9Subwoofer

2Placing speakers

5.1-channel system

10° to 30°10° to 30°

7.1-channel system

30 cm (1 ft) or more

10° to 30° 10° to 30°

RX-A820_esg_C.fm Page 2 Thursday, March 1, 2012 3:33 PM

Black process 45.0° 240.0 LPI

En 3

■Connecting speaker cables

Speaker cables have two wires. One is for connecting the

negative (–) terminals of the unit and the speaker, and the

other is for the positive (+) terminals. If the wires are

colored to prevent confusion, connect the black wire to

the negative and the other wire to the positive terminals.

aRemove approximately 10

mm (3/8”) of insulation

from the ends of the

speaker cable and twist

the bare wires of the cable

firmly together.

bLoosen the speaker terminal.

cInsert the bare wires of the cable into the gap on the side

(upper right or bottom left) of the terminal.

dTighten the terminal.

Using a banana plug

(U.S.A., Canada, China,

Australia and General

models only)

aTighten the speaker

terminal.

bInsert a banana plug into the end of the terminal.

1Connect the front speakers (1/2)

to the FRONT (//\) terminals. 2Connect the center speaker (3) to the

CENTER terminal.

3Connecting speakers/subwoofer

• Under its default settings, the unit is configured for 8-ohm

speakers. When connecting 6-ohm speakers, set the unit’s

speaker impedance to “6 ΩMIN”. For details, see “Setting the

speaker impedance” in “Owner’s Manual”.

• Use a subwoofer equipped with built-in amplifier.

• Before connecting the speakers, remove the unit’s power cable

from the AC wall outlet and turn off the subwoofer.

• Ensure that the core wires of the speaker cable do not touch

each other or come into contact with the unit’s metal areas. This

may damage the unit or the speakers. If the speaker cables

short circuit, “Check SP Wires” will appear on the front display

when the unit is turned on.

FRONT

– (black)

+ (red)

FRONT

Banana plug

FRONT CENTER SURROUND

SINGLE

AC IN

SURROUND BACK/BI AMP

ZONE 2/PRESENCE

EXTRA SP

AUDIO

OUT

ZONE 2

OUT

FRONT

SURROUND SUR. BACK

PRE OUT

SINGLE CENTER

SUBWOOFER

SPEAKERS

The unit (rear)

FRONT CENTER SURROUND

SINGLE

AC IN

SURROUND BACK/BI AMP

ZONE 2/PRESENCE

EXTRA SP

AUDI O

OUT

ZONE 2

OUT

FRONT

SURROUND SUR. BACK

PRE OUT

SINGLE CENTER

SUBWOOFER

SPEAKERS

The unit (rear)

RX-A820_esg_C.fm Page 3 Thursday, March 1, 2012 3:33 PM

Black process 45.0° 240.0 LPI

4En

3Connect the surround speakers

(4/5) to the SURROUND (//\)

terminals.

4Connect the subwoofer (9) to the

SUBWOOFER (1) jack. Connect the surround back speakers

(6/7) to the SURROUND BACK (//\)

terminals.

FRONT CENTER SURROUND

SINGLE

AC IN

SURROUND BACK/BI AMP

ZONE 2/PRESENCE

EXTRA SP

AUDI O

OUT

ZONE 2

OUT

FRONT

SURROUND SUR. BACK

PRE OUT

SINGLE CENTER

SUBWOOFER

SPEAKERS

The unit (rear)

FRONT CENTER SURROUND

SINGLE

AC IN

SURROUND BACK/BI AMP

ZONE 2/PRESENCE

EXTRA SP

AUDIO

OUT

ZONE 2

OUT

FRONT

SURROUND SUR. BACK

PRE OUT

SINGLE CENTER

SUBWOOFER

SPEAKERS

Audio pin cable

The unit (rear)

For 7.1-channel system

FRONT CENTER SURROUND

SINGLE

AC IN

SURROUND BACK/BI AMP

ZONE 2/PRESENCE

EXTRA SP

AUDIO

OUT

ZONE 2

OUT

FRONT

SURROUND SUR. BACK

PRE OUT

SINGLE CENTER

SUBWOOFER

SPEAKERS

The unit (rear)

RX-A820_esg_C.fm Page 4 Thursday, March 1, 2012 3:33 PM

Black process 45.0° 240.0 LPI

En 5

4Connecting external devices

INFOZONE 2

ZONE CONTROL

MEMORY

PRESET

FM AM

TUNING

BD/DVD

NET

RADIO

INPUT SCENE

MAIN ZONE

PHONES

TONE CONTROL

SILENT

CINEMA

STRAIGHTPROGRAM

PURE DIRECT

HDMI IN

VOLUME

YPAO MIC

iPod/iPhone/iPad

5V 2.1A

VIDEO AUX

USB

RLAUDIOVIDEO

FRONT CENTER SURROUND

SINGLE

AC IN

SURROUND BACK/BI AMP

ZONE 2/PRESENCE

EXTRA SP

COMPONENT

AV 1 AV 2 AV 3 AV 4 AV 5

AUDIO 1 AUDIO 2

OUT

AV 6

VIDEO

OPTICAL OPTICAL

(TV)

COAXIAL COAXIAL

COMPONENT

VIDEO

MONITOR OUT

OUT

REMOTE

TRIGGER OUT

AUDIO

OUT

ZONE 2

OUT

FRONT

SURROUND SUR. BACK

PRE OUT

SINGLE CENTER

SUBWOOFER

HDMI 1

(BD/DVD)

NETWORKDC OUT

0.5A

(NET)

HDMI 4 HDMI 5 HDMI 6

HDMI 7

RS-232C

HDMI 3HDMI 2

ANTENNA

(RADIO)

HDMI

OUT

ARC

SPEAKERS

12V

0.1A

HDMIOPTICAL

HDMI

HDMI 1

(BD/DVD)

HDMI

(TV)

OPTICAL

AV 4

HDMI OUT

ARC

HDMI

VOLTAGE

SELECTOR

220V-240V 110V-120V

TVAudio out

(optical) HDMI in HDMI out

BD/DVD player

HDMI OUT 1

jack

HDMI 1 jack

AV 4 (OPTICAL) jack

The unit (rear)

To an AC wall

outlet

Turn on the unit

The unit (front)

VOLTAGE SELECTOR

(General model only)

Press the bottom of the

front panel door gently to open the door

1Connect external devices to the unit.

aConnect a BD/DVD player to the unit with an HDMI

cable.

If the BD/DVD player is currently connected to the

TV directly with an HDMI cable, disconnect the

cable from the TV and connect it to this unit.

bConnect a TV to the unit with the other HDMI cable.

cConnect a TV to the unit with a digital optical cable.

This connection is required to play back TV audio

on the unit. This connection is not required if your

TV supports ARC (Audio Return Channel).

dConnect the supplied power cable to the unit and

then to an AC wall outlet.

• For information on how to connect radio antennas or other

external devices, see “PREPARATIONS” in “Owner’s Manual”.

2Turn on the unit, the TV and the BD/DVD

player.

3Use the TV remote control to change the

TV input to video from the unit.

The connections are complete. Proceed to the next

page to optimize the speaker settings.

• By connecting a TV to the unit with an HDMI cable, you can

configure the unit’s settings with the menu displayed on the TV. In

addition, you can select the on-screen menu language from English

(default), Japanese, French, German, Spanish, Russian and

Chinese. For details, refer to “Owner’s Manual”. In this guide,

illustrations of English menu screens are used as examples.

Before connecting the power cable (General model only)

Make sure you set the switch position of

VOLTAGE SELECTOR according to your local voltage.

Voltages are AC 110-120/220-240 V, 50/60 Hz.

RX-A820_esg_C.fm Page 5 Thursday, March 1, 2012 3:33 PM

Black process 45.0° 240.0 LPI

6En

The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the

distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as

volume balance and acoustic parameters, to suit your room.

Preparing for YPAO

Optimizing the speaker settings automatically (YPAO)

TV VOL TV CH

INPUT

MUTE

CODE SET

ENT

MEMORY

5687

1234

MOVIE

ENHANCER

TUNING PRESET

BAND

DISPLAYRETURN

ENTER

SCREEN OPTION

TOP MENU

MUTE

PROGRAM VOLUME

POP-UP/MENU

PURE DIRECT

STRAIGHT

INFO SLEEP

MUSIC

NET

PARTY HDMI OUT

TUNER

MAIN

ZONE 2

USB

MODE

SCENE

DVD TV

NET

RADIO

SOURCE

RECEIVER

HDMI

AUDIO

5 6 7

V-AUX

1234

SUR. DECODE

NPU

MEM

ENHANCE

NIN

PRE

BAN

SCREEN

PTI

TOP MEN

MUT

RAM

P-UP

URE DIRECT

TRAI

INF

MUSI

MI OUT

UNE

MAIN

RADI

EIV

HDMI

V-A

UR. DE

Cursor keys

ENTER

RETURN

• During the measuring process, test tones are output at high volume. Ensure that the test

tones do not frighten small children. Also, refrain from using this function at night when it

may be a nuisance to others.

• During the measuring process, you cannot adjust the volume.

• During the measuring process, keep the room as quiet as possible.

• Do not connect headphones.

• Do not stand between the speakers and the YPAO microphone during the measurement

process (about 3 minutes).

• Move to the corner of the room or leave the room.

YPAO MIC

VOLUME HIGH CUT

CROSSOVER/

MIN MAXMIN MAX

The unit (front)

Place the YPAO microphone at your

listening position (same height as your

ears). We recommend the use of a

tripod as a microphone stand. You can

use the tripod screws to fix the

microphone in place.

YPAO

microphone

Ear height

Turn on the subwoofer and set

the volume to half. If the

cross-over frequency is

adjustable, set it to maximum.

1Connect the YPAO microphone to the

YPAO MIC jack on the front panel.

The following screen appears on the TV.

• To cancel the operation, disconnect the YPAO microphone

before starting the measurement.

2To start the measurement, use the cursor

keys to select “Measure” and press

ENTER.

The measurement will start in 10 seconds.

The following screen appears on the TV when

the measurement finishes.

• If any error message (such as E-1) or warning message (such

as W-2) appears, see “Error messages” or “Warning

messages” in “Owner’s Manual”.

• If the warning message “W-1:Out of Phase” appears, see

“If “W-1:Out of Phase” appears” (next page).

RX-A820_esg_C.fm Page 6 Thursday, March 1, 2012 3:33 PM

Black process 45.0° 240.0 LPI

En 7

3Use the cursor keys to select

“Save/Cancel” and press ENTER.

4Use the cursor keys to select “SAVE” and

press ENTER.

5Disconnect the YPAO microphone from the

unit.

This completes optimization of the speaker settings.

Follow the procedure below to check the speaker

connections.

Depending on the type of speakers or room

environment, this message may appear even if the

speakers are connected correctly.

aUse the cursor keys to select “Result” and press ENTER.

bUse the cursor keys to select “Wiring”.

cCheck the cable connections (+/–) of the speaker that

was identified as being “Reverse” in the warning

message.

If the speaker is connected correctly:

You can save the current settings.

Press RETURN and proceed to step 3.

If the speaker is connected incorrectly:

Turn off the unit, reconnect the speaker cable, and then

try YPAO measurement again.

• The YPAO microphone is sensitive to heat, so should not be

placed anywhere where it could be exposed to direct sunlight or

high temperatures (such as on top of AV equipment).

If “W-1:Out of Phase” appears

RX-A820_esg_C.fm Page 7 Thursday, March 1, 2012 3:33 PM

Black process 45.0° 240.0 LPI

8En

Now let’s play back a BD/DVD.

We recommend playing back multichannel audio

(5.1-channel or more) to feel surround sound produced

by the unit.

1Press HDMI 1 to select “HDMI 1” as the

input source.

2Start playback on the BD/DVD player.

3Press STRAIGHT repeatedly to select

“STRAIGHT”.

4Press VOLUME to adjust the volume.

This completes the basic setup procedure.

Sound is only being output from the front speakers

during multichannel audio playback

Check the digital audio output setting on the BD/DVD

player.

It may be set to 2-channel output (such as PCM).

No sound is coming from a specific speaker

See “Troubleshooting” in “Owner’s Manual”.

6Playing back a BD/DVD

TV VOL TV CH

INPUT

MUTE

CODE SET

ENT

MEMORY

5687

1234

MOVIE

ENHANCER

TUNING PRESET

BAND

DISPLAYRETURN

ENTER

SCREEN OPTION

TOP MENU

MUTE

PROGRAM VOLUME

POP-UP/MENU

PURE DIRECT

STRAIGHT

INFO SLEEP

MUSIC

NET

PARTY HDMI OUT

TUNER

MAIN

ZONE 2

USB

MODE

SCENE

DVD TV

NET

RADIO

SOURCE

RECEIVER

HDMI

AUDIO

5 6 7

V-AUX

1234

SUR. DECODE

NPU

MEM

ENHANCE

NIN

PRE

BAN

RETURN

ENTE

SCREEN

PTI

TOP MEN

MUT

RAM

P-UP

URE DIRECT

INF

MUSI

MI OUT

UNE

MAIN

RADI

EIV

HDMI

V-A

UR. DE

HDMI 1

STRAIGHT

VOLUME

If surround sound is not working

SL SR

HDMI1

VOL .

SL SR

VOL .

STRAIGHT

SL SR

Volume -30.0dB

VOL .

Many more features!

The unit has various other functions.

Please refer to “Owner’s Manual” on the supplied

CD-ROM to help you get the most out of the unit.

Connecting other playback

devices

Connect audio devices (such as CD player),

game consoles, camcorders, and many others.

Selecting the sound mode

Select the desired sound program (CINEMA

DSP) or surround decoder suitable for movies,

music, games, sports programs, and other uses.

Playing back from iPod

By using a USB cable supplied with iPod, you

can enjoy iPod music on the unit.

■

Listening to FM/AM radio

■Playing back music stored on

a USB storage device

■

Playing back the network

contents

■

Selecting the input source and

favorite settings at once

For more information, see “What you can do

with the unit”.

RX-A820_esg_C.fm Page 8 Thursday, March 1, 2012 3:33 PM

Black process 45.0° 240.0 LPI

Es 1

Compruebe que se suministran los siguientes accesorios con el producto.

Se necesitan los siguientes cables (no suministrados) para crear el sistema descrito

en este documento.

• Cables de los altavoces (dependiendo del número de altavoces)

• Cable HDMI (x2)

• Cable de audio con patillas (x1)

• Cable digital óptico (x1) (no es necesario si el TV es compatible con la función ARC

[Audio Return Channel])

1Preparación

Accesorios

Mando a distancia Pilas

(AAA, R03, UM-4) (x2)

Inserte las pilas en el sentido correcto.

Antena de AM Antena de FM Micrófono YPAO

Cable de

alimentación

CD-ROM

(Manual de

Instrucciones)

Folleto de

seguridad

Guía de

configuración

sencilla

• Las ilustraciones de la unidad principal y del mando a distancia utilizadas en esta guía corresponden

al modelo de Estados Unidos, a menos que se especifique de otro modo.

*La antena de FM suministrada

varía según la región en la

que se realice la compra.

*El cable de alimentación

suministrado varía según

la región en la que se realice

la compra.

Cables necesarios para las conexiones

UAB

En este documento se explica cómo configurar un sistema de 5.1 o 7.1

canales y reproducir el sonido surround de un BD/DVD en la unidad.

Para reducir el impacto en los recursos naturales, el Manual de Instrucciones de

este producto se suministra en CD-ROM. Para obtener más información sobre el

producto, consulte el Manual de Instrucciones que encontrará en el CD-ROM

suministrado.

Se pueden descargar versiones PDF de esta guía y el “Manual de Instrucciones”

desde el siguiente sitio web.

http://download.yamaha.com/

Guía de

configuración sencilla

Español

Receptor AV

RX-A820_esg_RL.fm Page 1 Friday, March 9, 2012 2:30 PM

Andere Handbücher für Aventage RX-A820

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Yamaha Stereo-Receiver Handbücher

Yamaha

Yamaha RX-1130 Bedienungsanleitung

Yamaha

Yamaha RX-V4/390 Bedienungsanleitung

Yamaha

Yamaha YHT-5950U Bedienungsanleitung

Yamaha

Yamaha RX-330 Bedienungsanleitung

Yamaha

Yamaha R-5 Bedienungsanleitung

Yamaha

Yamaha RX-360 Bedienungsanleitung

Yamaha

Yamaha RX-497 Bedienungsanleitung

Yamaha

Yamaha R-500 Bedienungsanleitung

Yamaha

Yamaha RX-497 Bedienungsanleitung

Yamaha

Yamaha RX-V480 Bedienungsanleitung

Yamaha

Yamaha R-9 Bedienungsanleitung

Yamaha

Yamaha AVENTAGE RX-A550 Bedienungsanleitung

Yamaha

Yamaha RX-750 Bedienungsanleitung

Yamaha

Yamaha CR-240 Bedienungsanleitung

Yamaha

Yamaha RX-300 Bedienungsanleitung

Yamaha

Yamaha R-302 Bedienungsanleitung

Yamaha

Yamaha RX-V990 Bedienungsanleitung

Yamaha

Yamaha RX-V1800 Bedienungsanleitung

Yamaha

Yamaha RX-V3900 Bedienungsanleitung

Yamaha

Yamaha MusicCast TSR-7810 Bedienungsanleitung

Yamaha

Yamaha RX-V3085 Bedienungsanleitung

Yamaha

Yamaha RX-V1083 Bedienungsanleitung

Yamaha

Yamaha HTR-3071 Bedienungsanleitung

Yamaha

Yamaha R-2000 Bedienungsanleitung

Beliebte Stereo-Receiver Handbücher anderer Marken

Marantz

Marantz CINEMA 70S Bedienungsanleitung

Kenwood

Kenwood KMDX92 Bedienungsanleitung

Pioneer

Pioneer AVH-Z7250BT Bedienungsanleitung

Denon

Denon AVR-1311 Bedienungsanleitung

Denon

Denon AVR-S760H Bedienungsanleitung

Denon

Denon AVR-X7200W Bedienungsanleitung

Pioneer

Pioneer SC-LX904 Handbuch

Sony

Sony XAV-1500 Bedienungsanleitung

Radio Shack

Radio Shack DX-399 Bedienungsanleitung

Sony

Sony STR-DE535 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Pioneer

Pioneer SX-1000TA Bedienungsanleitung

Sony

Sony STR-DE335 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Sony

Sony STR-DG500 - Multi Channel Av Receiver Bedienungsanleitung

Panasonic

Panasonic AJSD955B - DVCPRO50 STUDIO DECK Bedienungsanleitung

Pioneer

Pioneer SX-838 Bedienungsanleitung

Sherwood

Sherwood S-2660CP Technisches Handbuch

Sony

Sony STR-K790 - Lifier Bedienungsanleitung

Pioneer

Pioneer XR-VS77 Bedienungsanleitung