Yamato MK201D Bedienungsanleitung

Shaking Device

MK201D

Instruction Manual

First Edition

Yamato Scientific Co. LTD.

This paper has been printed on recycled paper.

Thank you for purchasing "Shaking Device,

MK201D" of Yamato Scientific Co., Ltd.

To use this unit properly, read this "Instruction

Manual" thoroughly before using this unit.

Keep this instruction manual around this unit for

referring at anytime.

WARNING!:

Carefully read and thoroughly understand the

important warning items described in this manual

before using this unit.

Cautions in Using With Safety ..............................................................1

Explanation..................................................................................................................1

Table of Illustrated Symbols .........................................................................................2

Fundamental Matters of “WARNING!” and “CAUTION!” ...............................................3

Before Using this unit............................................................................4

Requirements for Installation........................................................................................4

Requirements for Installation........................................................................................5

Requirements for Installation........................................................................................6

Component Names & Functions...........................................................7

Operation Method ..................................................................................8

Preparation for Operation.............................................................................................8

Operation.....................................................................................................................9

Timer Operation method ..............................................................................................9

Timer operation method.............................................................................................10

Handling Precautions ..........................................................................11

Maintenance Method............................................................................13

Daily Inspection and Maintenance..............................................................................13

When not using this unit for long term / When disposing............................................13

In the Event of Failure… ......................................................................14

Trouble Shooting........................................................................................................14

In such cases.............................................................................................................14

After Service and Warranty .................................................................15

Specification.........................................................................................16

Wiring Diagram ....................................................................................17

List of Dangerous Substances............................................................18

Cautions in Using With Safety

Explanation

MEANING OF ILLUSTRATED SYMBOLS

Varioussymbols are used in thissafety manual in order to use the unit without

danger of injury and damage of the unit. A list of problems caused by ignoring

the warnings and improper handling is divided as shown below.Be sure that you

understand the warningsand cautionsin this manual before operating the unit.

WARNING! If the warning is ignored, there is the danger of a problem that

may cause a serious accident or even fatality.

CAUTION! If the caution is ignored, there is the danger of a problem that may

cause injury/damage to property or the unit itself.

Meaning of Symbols

This symbol indicates items that urge the warning (including the caution).

A detailed warning message is shown adjacent to the symbol.

This symbol indicates items that are strictly prohibited.

A detailed message is shown adjacent to the symbol with specific actions not to

perform.

This symbol indicates items that should be always performed.

A detailed message with instructions is shown adjacent to the symbol.

Illustrated Symbols

Cautions in Using with Safety

Table of Illustrated Symbols

Warning

Warning,

generally

Warning,

high voltage

Warning,

high temperature

Warning,

drive train

Warning,

explosive

Caution

Caution,

generally

Caution,

electrical shock

Caution,

scald

Caution,

no road heating

Caution,

not to drench

Caution,

water only

Caution,

deadly poison

Prohibit

Prohibit,

generally

Prohibit,

inflammable

Prohibit,

to disassemble

Prohibit,

to touch

Compulsion

Compulsion,

generally

Compulsion,

connect to the

grounding

terminal

Compulsion,

install on a flat

surface

Compulsion,

disconnectthe

powerplug

Compulsion,

periodical

inspection

Cautions in Using with Safety

Fundamental Matters of “WARNING!” and “CAUTION!”

WARNING!

Do not use this unit in an area where there is flammable or explosive gas

Never use this unit in an area where there is flammable or explosive gas.

This unit is not explosion-proof. An arc may be generated when the power switch is turned on or off,

and fire/explosion may result.

Always ground this unit

Always ground this unit on the power equipment side in order to avoid electrical shock due to a power

surge.

If a problem occurs

If smoke or strange odor should come out of this unitfor some reason, turn off the power key right away,

and then turn off the circuit breaker and the main power. Immediately contact a service technician for

inspection. If this procedure is not followed, fire or electrical shock may result. Never perform repair work

yourself, since it is dangerous and not recommended.

Do not use the power cord if it is bundled or tangled

Do not use the power cord if it is bundled or tangled. If it is used in this manner, it can overheat and

fire may be caused.

Do not process, bend, wring, or stretch the power cord forcibly

Do not process, bend, wring, or stretch the power cord forcibly. Fire or electrical shock may result.

Substances that can not be used

Never use explosive substances, flammable substances and substances that include explosive or

flammable ingredients in this unit. Explosion or fire may occur.

NEVER disassemble or modify equipment.

Attempting to dismantle or modify unit in any way, may cause malfunction, fire or electric shock.

Caution

DO NOT operate equipment during thunderstorms.

In the event of a thunderstorm, terminate operation and turn off power switch immediately. A direct

lightning strike may cause damage to equipment, or result in fire or electric shock.

Before Using this unit

Requirements for Installation

WARNING!

1. Always ground this unit

Ground wire must be connected to a proper grounding line or teminal in order to avoid

electrical shock.

Never connect ground wire to gas lines or water pipes.

Never connect ground wire to telephone grounding lines or lightening rods. Doing so may

result in fire or electric shock.

Never insert multiple plugs into a single outlet. Doing so may result in power cable

overheating, fire or drop in voltage.

Connect to grounded outlet.

Usegroundedadapterforungroundedoutlets.

↑Insert grounded power plug into ground

adapter. Connect grounding wire (green) from

ground adapter to a ground terminal.

When no grounding terminal is found:

Grounding to Electrical Equipment Technical

Standards, Section 19, class D (Grounding

Resistance Max. 100Ω) is required in Japan.

Contact a local dealer, electrician, or Yamato

Sales office for location-specific electrical

requirements.

2. Choose a proper place for installation

Do not install this unit in a place where.

Flammable gas or corrosive gas is generated.

Ambient temperature exceeds 35C.

Ambient temperature fluctuates violently.

There is excessive humidity and dust.

There is direct sunlight.

There is a constant vibration.

Install this unit on a stable place with the space as shown below.

Main Unit

More than

20cm

More than

20cm

More than 20cm

Front side

Grounded outlet

3-pronged plug

Grounding wire

Ungrounded outlet

Before Using this unit

Requirements for Installation

3. Do not use this unit in an area where there is flammable or explosive gas

Never use this unit in an area where there is flammable or explosive gas. This unit is not

explosion-proof. An arc may be generated when the power switch is turned ON or OFF, and

fire/explosion may result.

4. Do not modify

Modification of this unit is strictly prohibited. This could cause a failure.

5. Installation on horizontal surface

Set this unit to the flattest place. Not setting this unit with its 4 legs covered with rubber

contacted to the setting place surface evenly could cause the vibration or noise, or cause the

unexpectible trouble or malfunction.

Before Using this unit

Requirements for Installation

CAUTION!

6. Choose a correct power distribution board or receptacle

Choose a correct power distribution board or receptacle that meets the unit’s rated electric

capacity.

Electric capacity:

AC115V 2A

There could be the case that the unit does not run even after turning ON the power. Inspect

whether the voltage of the main power is lowered than the specified value, or whether other

device(s) uses the same power line of this unit.

7. Before/after installing

It may cause injure to a person if this unit falls down or moves by the earthquake and the impact.

etc..To prevent, take measures that the unit cannot fall down, and not install to busy place.

Touching the shaking parts may cause injure to a person during the operation. To prevent, take

measures that putting up a notice of operating, making an enclosure etc..

8. Handling of power code

Do not entangle the power cord. This will cause overheating and possibly a fire.

Do not bend or twist the power cord, or apply excessive tension to it. This may cause a fire and

electrical shock.

Do not lay the power cord under a desk or chair, and do not allow it to be pinched in order to

prevent it from being damaged and to avoid a fire or electrical shock.

Keep the power cord away from any heating equipment such as a room heater. The cord's

insulation may melt and cause a fire or electrical shock.

If the power cord becomes damaged (wiring exposed, breakage, etc.), immediately turn off the

power at the rear of this unit and shut off the main supply power. Then contact your nearest

dealer for replacement of the power cord. Leaving it may cause a fire or electrical shock.

Connect the power plug to the outlet which is supplied appropriate power and voltage.

Component Names & Functions

The unit requires a shaking table (optional) dedicated for specific applications.

First purchase a special rack appropriate for your application.

Power switch································ When the power switch is ON, it become continuous operation. When

the power switch is set to TIMER, it start timer operation. And, turn the

power switch is OFF.

Power lamp·································· When power switch is ON or TIMER, indicator illuminates green.

Speedknob··································· Controls mixing speed. Turn clock-wise to increase speed.

Speed indicator····························· The screen displays the shaking speed (RPM).

Timer·········································· Select of timer operating mode. (Refer to page 9. “Timer operation

method”）

Fuse··········································· The fuse cut off the power supply in case of overcurrent occurrence. In

that case, because exchange is necessary, I take off a cap and let a fuse

of the inside, and, please replace it with an accessory.

Power cord ·································· Connects to AC100V outlet to supply power to unit。

Power switch

Power cord

Timer

Shaking table（※）

Power lamp

Fuse

Speed knob

Speed indicator

Inhaltsverzeichnis

Andere Yamato Spritzpistole Handbücher

Yamato

Yamato SA400 Bedienungsanleitung

Beliebte Spritzpistole Handbücher anderer Marken

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Bedienungsanleitung

Graco

Graco 246737 Gebrauchs- und Pflegehandbuch

Binks

Binks SV100 Bedienungsanleitung

Fimco

Fimco LG-4-3-1 Bedienungsanleitung

AG SPRAY

AG SPRAY FS-ATV-25BL Bedienungsanleitung

Nordson

Nordson MicroMax 2 Bedienungsanleitung

Bonide

Bonide 051 Bedienungsanleitung

zogics

zogics Z-DAS Bedienungsanleitung

KISANKRAFT

KISANKRAFT KK-KBS-165 Bedienungsanleitung

Matrix

Matrix SG 650 Bedienungsanleitung

Anest Iwata

Anest Iwata SGA-3 Kurzanleitung

paasche

paasche VV Datenblatt

Carlisle

Carlisle DeVilbiss JGA-510 Bedienungsanleitung

Gardena

Gardena 11120 Bedienungsanleitung

Conrad

Conrad Hobby Airbrush K3 Bedienungsanleitung

wiwa

wiwa 14025 R/F Bedienungsanleitung

Graco

Graco EM 390 Bedienungsanleitung

DeVilbiss

DeVilbiss LUNA2i Bedienungsanleitung