Yamato AW-WPS Bedienungsanleitung
0
Digital Portion Scale
AW-WPS
SERVICE MANUAL
PLEASE TAKE THE TIME TO READ THESE INSTRUCTIONS BEFORE
STARTING TO USE THE SCALES
1
TABLE OF CONTENTS
TABLE OF CONTENTS ..........................................................................1
SPECIFICATIONS ...................................................................................2
OVERLAY ...............................................................................................2
KEY FUNCTION .....................................................................................3
PREPARING SCALE FOR WEIGHING ..................................................4
CHANGING THE WIRELESS DISPLAY’S CHANNEL .........................4
SELECTING THE SCALE PLATFORM’S CHANNEL ...........................5
USING THE TARE FUNCTION ..............................................................6
SETTING MODE.....................................................................................7
SETTING FUNCTION DESCRIPTION...................................................8
CALIBRATION PROCEDURE................................................................9
TABLE-TOP STAND AND WALL MOUNTS........................................10
POWER SOURCES................................................................................11
CONTROL PANEL ................................................................................12
LCD FORMAT .......................................................................................13
PARTS &ASSEMBLY DRAWING........................................................14
TROUBLE SHOOTING.........................................................................15
ERROR MESSAGES..............................................................................16
2
SPECIFICATIONS
Model AW-WPS
Capacity
0-10 lb x 0.05 oz/10-30 lb x 0.1 oz
0-5 kg x 0.002 kg(2 g)/5-15 kg x 0.005 kg (5 g)
30 lb x 1/8 oz
Weight Unit lb:oz(decimals)
lb:oz(fractions)/kg
LCD Readout 1” LCD readout
Dimensions 14” x 14” x 1.6”
Buttons ON/OFF, HOLD, Unit, Tare, Channel
Power
Supply
10 x AA batteries
(6 for base, 4 for remote,not included.)
2 120V AC adapters
(1 for base, 1 for remote (included))
Operation
Temperature 32°F / 104°F (0℃/ 40℃)
OVERLAY
3
KEY FUNCTION
Press to turn the scale ON or OFF.
Press to ‘Tare’(zero) the weight of any item while
weighing.
Press to ‘Hold’the weight on the screen.
Press to switch between lb:oz and kg units of
measurement.
Press to reset the scale to zero(TARE function)if
the scale does not show zero automatically.
Icon flashes when scale is ready for a weighing.
Stability display:
If the display shows‘o’,the weight is stable on the
scale. If the display shows ‘ ’, the weight is
unstable.
The ‘Hold’ weighing function is active.
kg ←→ lb:oz Indicates the Weighing unit [kg ←→ lb:oz].
Stored ‘Tare’value.
Touch-free taring field.
-/ o on base
On (-) /Off (o) switch for scale base.
4
PREPARING SCALE FOR WEIGHING
Before Weighing
1. Please select the scale’s channel to match the wireless display. (The
scale’s channel indicator is located on the scale’s base; please remove
the rubber stopper to access the channel indicator.)For example: If the
wireless display is using Channel-1, select Channel-1 for the
scale.(Please see Page 6 for instructions for selecting platform channels.)
2. Press the ON/OFF button to turn on the scale.
3. Please make sure that the distance between the scale base and the
wireless display is within 30 feet (10 meters).
Note: If the scale’s channel is not same as the wireless display, ‘88888’will
appear on the display. Set the scale and wireless display to the same
channel.
Weighing
1. Press the ON/OFF button to turn on the scale.
2. ‘88888’appears on the screen, then ‘0’ and ‘ ’will flash.
The scale is ready for weighing.
*NOTE- If the “88888” display does not show ‘01, press the
button to change the wireless display’s channel to match the scale’s
channel. For example: If the scale’s channel is set to Channel-1, please
select Channel-1 for the wireless display also.
CHANGING THE WIRELESS DISPLAY’S CHANNEL
5
Press the button to select the wireless display channel.
Channel numbers (1, 2, 3) are shown on the left hand side of the display.
When a channel is selected,a triange icon points to the selected channel.
For example- If Channel-1 is selected,
the triange icon points to ‘1’.
Channel 1
Channel 2
Channel 3
SELECTING THE SCALE PLATFORM’S CHANNEL
6
To select the scale platform’s channel, first turn off the scale base and
wireless display units. Then use the dip switch, which is located on the
bottom of the scale under the rubber stopper. The dip switch has four pins
marked ‘1, 2, 3, 4’(Pin-4 is not active; only 3 channels are available for
use.) To select a channel, move the pin toward the ‘ON’ mark (pictured
below). For example- To select Channel-1 for the scale, move Pin-1
towards the ‘ON’ mark. Turn on the scale base first, then the wireless
display for use.
The dip switch is on the bottom of the scale platform under the rubber
stopper.
Channel 1 Channel 2 Channel 3
USING THE TARE FUNCTION
7
The Tare Function allows the user to zero the scale to cancel out the weight
of a container, thus giving the weight of the item being weighed.
Press the ON/OFF button to turn on the scale.
Place the containter on the scale platform.
Press the ‘TARE’ button after the weight stabilizes and stable sign
displays.
The display will reset to ‘0’.
Place the item to be weighed on the platform(without removing the
‘tared’container).
OR
Touch Free Tare Function: This scale is equipped with ‘Photo eye
mechanism’ for a touch free ‘TARE’ function. Simply pass your hand over
the ‘Photo eye’sensor and the scale will tare the weight.
Place the container to be tared on the scale platform.
Pass your hand over the sign on the indicator.
The display will reset to ‘0’.
Place the next item to be weighed on the scale platform.
To reset the ‘TARE’to zero, remove the tared container from the platform
and press the ‘TARE’ button, or pass your hand over the sign.
SETTING MODE
8
Please press and hold ON/OFF key and press TARE key 3 times at same
time. The display shows SETUP and then followed y UNIT appears.
SETTING FUNCTION DESCRIPTION
Press to move right or
down as shown in
setup flowchart.
9
Function Description Default
(Units): lb , kg
kg, lb
(Graduations):Setting division, max
capacity and graduation
1500d / 2000d / 2500d / 3000d / 6000d
3000d
(Auto off Time): 120 sec/ 180 sec/ 240
sec/ 300 sec/ OFF
180
(Hold range): 2d/ 5d/ 10d/ 15d
5d
(Gravity): on , off
off
(Touch less feature): on , off
on
To confirm the settings and end the
procedure
CALIBRATION PROCEDURE
Andere Handbücher für AW-WPS
1
Inhaltsverzeichnis
Andere Yamato Skala Handbücher
Yamato
Yamato AW-300P Bedienungsanleitung
Yamato
Yamato DSR-400 Bedienungsanleitung
Yamato
Yamato PPC-200 Bedienungsanleitung
Yamato
Yamato DP-6200 Bedienungsanleitung
Yamato
Yamato Accu-weigh PPC-200W Bedienungsanleitung
Yamato
Yamato Clock MINI DF301 Bedienungsanleitung
Yamato
Yamato PPC-101 Bedienungsanleitung
Yamato
Yamato UDS-1V-WP Bedienungsanleitung
Yamato
Yamato SPC Series Bedienungsanleitung
Yamato
Yamato DP-6100GP Bedienungsanleitung
Yamato
Yamato BC-10 Bedienungsanleitung
Yamato
Yamato DSR-200 Bedienungsanleitung
Yamato
Yamato SPC-2002 Bedienungsanleitung
Yamato
Yamato DKS-3002 Bedienungsanleitung
Yamato
Yamato CPC-2000 Bedienungsanleitung
Yamato
Yamato PLS Series Bedienungsanleitung
Yamato
Yamato DSR-200 Bedienungsanleitung
Yamato
Yamato DKS-3002 Bedienungsanleitung
Yamato
Yamato AW-300P Bedienungsanleitung
Yamato
Yamato DSY-1100 Bedienungsanleitung
