Yangda Sky Eye-30HZ Bedienungsanleitung

Shenzhen Yangda Security Co., LtdShenzhen Yangda Security Co., Ltd Website: www.yangdaonline.com Email: [email protected]Website: www.yangdaonline.com Email: [email protected]

Sky Eye-25HZ

4K Object Tracking Gimbal Camera

Warning and Disclaimer

Make sure not to adjust the gimbal or change its mechanical structure by yourself. Be

sure tomount the camera to gimbal before power on,and then install the gimbal on

the aircraft.

To avoid gimbal performance degradation or damage caused by imbalanced

payload,please do not add otherperipherals for the gimbal camera (filter,hood,etc.).

When in aerial photography,make sure your aircraft flight control system is working at

the safe mode.

We strongly recommend that you remove aircraft propellers before doing gimbal

configuration.Use extranon-power battery for gimbal.Keep children away from the

preset flight region.

Considering that we are not able to control user's specific usage,installation,

assembly,modification( including the use of non-specified parts ),and improper use.

Direct or indirect damage or injurycaused by the behavior above, our company will

not cover any loss and responsibility.

Shenzhen Yangda Security Co., LtdShenzhen Yangda Security Co., Ltd Website: www.yangdaonline.com Email: [email protected]Website: www.yangdaonline.com Email: [email protected]

Gimbal description

[2]

[1]

[3]

[6]

[7]

[8]

[4]

[5]

[9]

[1] Control box [2] Gimbal fixed copper cylinder

[3] Damping ball [4] Upper damping board

[5] Lower damping board [6] YAW axis motor

[7] Roll axis motor [8] Pitch axis motor

[9]HD zoom camera

!Please make sure that the motor is not stopped by any object during

the rotation, if the gimbal is blocked during rotation, please remove

the obstruction immediately.

Shenzhen Yangda Security Co., LtdShenzhen Yangda Security Co., Ltd Website: www.yangdaonline.com Email: [email protected]Website: www.yangdaonline.com Email: [email protected]

Gimbal camera*1 Copper cylindersr*4

Anti shedding buckle*4

5mm*12 8mm*4

Button head hexagon screw*16

Damping board*2

Packing List

Gimbal Camera Dimension

Unit :mm

140

153

106

Shenzhen Yangda Security Co., LtdShenzhen Yangda Security Co., Ltd Website: www.yangdaonline.com Email: [email protected]Website: www.yangdaonline.com Email: [email protected]

Connection of Control Box and Wiring Instruction

1.Insert SD card

2.connect HDMI to display

SD card position

Control Box position

HDMI : micro HDMI OUTPUT

1080P 60fps default

SD card: max 128G，class10

FAT32 or exFAT format

HDMI position

3S~4S

US B

1 2 3

R6208

S B

Fu tab a

DATA

o O nl

S.B U S

S.bus/Rx

lli/

Yaw

Mode

Zoom

Focus

Pic/

3. Connect the signal line as below

PWM

S.b u s/ Rx

Roll/Tx

Pitch

Yaw

Mode

Zoom

Focus

Pic/Rec

Multi

USB

1 2 3

5V GND

RX1 RX2 RX3

TX1 TX2 TX3

4. Power supply with 12V, red line is positive and black is negative.

S.bus/ Rx

Roll/Tx

Pitch

Yaw

Mode

Zoom

Focus

Pic/Rec

Multi

Shenzhen Yangda Security Co., LtdShenzhen Yangda Security Co., Ltd Website: www.yangdaonline.com Email: [email protected]Website: www.yangdaonline.com Email: [email protected]

Function Description

Gimbal control

•Yaw axis control:speed mode,connect Rocker channel(or 3 gears channel,push

gear to middle position to stop)

•Pitch axis control:speed mode,connect Rocker channel(or 3 gears

channel,push gear to middle position to stop)

•Mode control:speed mode:connect rocker channel(angle mode,connect knob

channel. Please check page 6 to know more about the angle mode setup)

Gimbal is at the highest speed when controlling YAW and PITCH axis if the rocker is at

high position.Flip to any other position,gimbal speed will become lower.

Go back to home position: when the “mode” channel is connecting with rocker,

then flip the rocker like this: middle-high-middle.

•Multi:Multi function control

Shenzhen Yangda Security Co., LtdShenzhen Yangda Security Co., Ltd Website: www.yangdaonline.com Email: [email protected]Website: www.yangdaonline.com Email: [email protected]

Camera control

1. Zoom control:connect 3 gears or rocker channel

2. Focus:connect 3 gears or rocker channel for manual focus control.If do

not connect any channel,then camera will auto focus after zooming

3. Pic/REC:taking picture/recording,connect 3 gears channel

Flip the gear from middle position to high position,taking picture/recording

mode switch

Flip the gear from middle position to low position:

•A:If under recording mode:record start,flip from middle to low again,

record stop

•B:If under taking picture mode,start taking picture

Signal functions

PWM in

5V output

GND

TTL 115200/8/1/N

USER BOARD

GND

S.bus/Rx

Roll/Tx

Pitch

Yaw

Mode

Zoom

Focus

Pic/Rec

Multi

S.bus/Rx: connect to Rx2 for track function.

Roll/ Tx: connect to Tx2 for track function.

Pitch: PWM in, pitch control

Shenzhen Yangda Security Co., LtdShenzhen Yangda Security Co., Ltd Website: www.yangdaonline.com Email: [email protected]Website: www.yangdaonline.com Email: [email protected]

Pitch: PWM in, pitch control

1 pitch up

2 pitch stop

3 pitch down

We have protocol for control the

gimbal and camera, please

contact our technical s uppor t for

detail doc.

USER BOARD / GPS module

GND

TTL 9600/8/1/N

Yaw: PWM in, Yaw contro

1 Yaw right 2 Yaw stop 3 Yaw left

Mode: Change the speed / home position

•

Position 1: Lowest speed for pitch and

yaw.

Position 2: Middle speed for pitch and

yaw.

•Position 3: Highest speed for pitch

and yaw.

•One click: Home position.

•Two click: Look down.

•Three click: Yaw not followed by frame.

•Four click: Yaw followed by frame.

•Five click: Restore the factory settings.

(Click = from 2 to 3 and back to 2 quickly)

The speed is continuously quickly from 1 to 3.

Shenzhen Yangda Security Co., LtdShenzhen Yangda Security Co., Ltd Website: www.yangdaonline.com Email: [email protected]Website: www.yangdaonline.com Email: [email protected]

ZOOM: Zoom the camera Focus: Focus the camera

1 zoom tele

2 stop zoom

3 zoom wide

1 focus tele

2 stop focus

3 focus near

Pic/ Rec picture / Start record, stop record

•Switch 2 to 1: Camera mode change;

Picture mode: the number is quantity of photos that SD

card can storage;

Record mode: the time is recording time left.

•Switch 2 to 3: A. take a picture B. Start record / stop record

Multi: Back up PWM channel for customization

1 2 3

AV: NO AV output.

Shenzhen Yangda Security Co., LtdShenzhen Yangda Security Co., Ltd Website: www.yangdaonline.com Email: [email protected]Website: www.yangdaonline.com Email: [email protected]

Sensor 1/2.3 inch CMOS SENSOR

Still Image Resolution 25.9 Megapixels (16:9)

Recording Resolution 4K: 3840x2160/30p; FHD: 1080/60p

Focal Length f=4.08-81.6mm(F1.8-F3.6)

25X zoom (4K recording mode)

20X optical zoom(Photo mode)

40X zoom(FHD recording mode)

Horizontal: 53.2°(Wide end) ~ 5.65°(Tele end)

Vertical: 39.8°(wide end) ~ 4.2°(tele end)

Focus: 66.6°(wide end) ~ 7.2°(tele end)

Video format MPEG-4

Recording Shutter 1/3 ~1/8000