Yapalong BOOM MIC Bedienungsanleitung
User’s Manual
SPECIFICATIONS
Bluetooth Protocol
Noise Cancellation
Range
Freqency Band
Talking Time
Standby Time
Weight
Battery
Charging
Charging Time
Version 5.0
CVC 8.0
5 Meters
2.4~2.48 GHz
Unlicensed ISM Band
Up to 6 Hours
Up to 300 Hours
18 g
Li-ion Battery
3.7 V/ 90 mAh
5~6 VDC/400 mA
Up to 1.5 Hour
2
SWIVEL TO ADJUST
34
CHARGING
Light Indications:
- Solid Red, charging
- Solid Blue, charging is complete
- Flashing Red, battery is low
(With 2 “beeps” every 5 seconds)
Notes:
- Please charge your Bluetooth headset
FULLY if it is used for the first time.
- Charge once a month if the headset is not
used often for longer battery life.
DIAGRAM
Vol+ Button
Vol - Button
Speaker
Power Button
MIC2
MIC1
Light
Charging Port
(Micro-USB)
Vol+, SHORT click for volume increase
Vol -, SHORT click for volume decrease
MIC2 is for noise cancellation
Adaptable to either ear
240°
180°
BOOM MIC - OPEN MIC
HEADSET
The following types of ear tips are provided:
- Half-in-ear tips
small and large
- In-ear tips
small and large
- Custom molded earplugs (not provided)
It is for the most secure wear. Check details
at yapalong.com/products/earmolding
567
PAIRING WITH YAPALONG (Cont’d)
EAR TIPS
PAIRING WITH YAPALONG WEAR USE WITH CELLPHONE
Note: before starting, please turn off all the
Bluetooth devices in the surroundings.
Power on both the Yapalong6000 radio and
the headset, and you will find any of the
following 3 states of the green Bluetooth
light on the RADIO, not the headset:
State1 Off
It indicates that the radio has detected its
paired headset. No pairing is required.
State2 Flashing slowly
It indicates that the radio has a paired head-
set but cannot detect it. The radio will not
pair in this state. Press both the Settings
and Bluetooth buttons to remove the
memory of the paired headset, the light will
show the following state:
State3 Flashing quickly
It indicates that the radio has no paired
headset. It is ready to pair and will pair
automatically.
During pairing, make sure the headset is in
pairing mode: it reports, “Pairing…”, and its
light is flashing red and blue alternately.
If the headset is not in pairing mode, please
restart it.
After 5 seconds or more, the green
Bluetooth light on the radio will be off, the
headset will report “Connected”, and the light
on the headset will turn solid blue, which
indicates both are paired.
7895 Tranmere Dr., Unit 13,
Mississauga, Ontario L5S 1V9
Canada
1-(905)-405-0300 V1
Pairing
1.Power on the headset.
The headset reports ”Power On”.
The light flashes red and blue alternately.
2.Activate cellphone’s Bluetooth function.
Search for the available Bluetooth devices.
3.Select “Y-6000” from the list.
“Y-6000” is shown in your Bluetooth device
list once it is connected.
The headset reports “Connected”.
Answer A Call
The headset will ring when a call dials in.
Click the PTT button to receive the call.
Play Music
Click the PTT button to play the music.
Click again stop the music.
LONG click Vol+ for the last song.
LONG click Vol - for the next song.
This headset transmits low-power Bluetooth
signals to the radio. Please wear the headset
and the radio at the same side of your body
to avoid body blocking to the Bluetooth
signals.
Dieses Handbuch passt für folgende Modelle
1
Andere Yapalong Headset Handbücher
