Yard Works 60-2271-8 Bedienungsanleitung

ELECTRIC GRASS TRIMMER/EDGER

60-2271-8

Owner's Manual

WARNING: Read and follow all safety rules and operating

instructions before using this product.

TOLL-FREE HELPLINE: 1 866 523-5218

Table of Contents

Technicaldata ................................2

Warranty ...................................22

Exploded view ................................23

Parts list ...................................24

General safety rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Specific safety rules for grass trimmers . . . . . . . . . . . . . . . 5

Electrical information . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Know your grass trimmer . . . . . . . . . . . . . . . . . . . . . . . . . 8

Assembly and adjustments . . . . . . . . . . . . . . . . . . . . . . . 9

Operation ...................................18

Maintenance .................................21

Technical Data

Input.........................................................120 V AC, 60 Hz, 5.0 A

Feed........................................................ Automatic

Speed...................................................... 8,500RPM (no load)

Cuttingpath.............................................. 14" (35 cm)

Linediameter............................................0.065" (1.65 mm)

Weight..................................................... 7 lb 4 oz (3.3 kg)

Use YARDWORKS 60-2269-6 replacement.

General Safety Rules

Safety is a combination of common sense, staying alert and knowing how to

use your grass trimmer.

1. READ and become familiar with this entire instruction manual. LEARN about

the tool’s applications, limitations and possible hazards.

2. AVOID DANGEROUS CONDITIONS. DO NOT use in wet or damp areas

or expose to rain.

3. DO NOT use in the presence of flammable liquids or gases.

4. KEEP BYSTANDERS AT A SAFE DISTANCE. NEVER allow children near

the tool.

5. DRESS FOR SAFETY. DO NOT wear loose clothing, gloves, neckties, or

jewellery (rings, watches, etc.) when operating the tool. Loose clothing can

get caught and draw you into moving parts.

6. ALWAYS WEAR EYE PROTECTION.

7. ALWAYS remove the extension cord plug from the electric outlet when making

adjustments, changing parts or cleaning.

8. AVOID ACCIDENTAL START-UPS. Make sure the power switch is in the

OFF position before plugging in the extension cord.

9. TREAT the extension cord with care. Do not use it to carry the tool. Keep cord

away from heat, oil, sharp edges, or moving parts. Replace damaged cords

immediately; they may create a shock or fire hazard.

10. NEVER LEAVE A RUNNING TOOL UNATTENDED. Turn the power switch

to OFF. Do not leave the tool until it has come to a complete stop.

11. DO NOT OVERREACH. Keep proper footing and balance at all times.

SAVE THESE SAFETY INSTRUCTIONS

⁄WARNING: TO AVOID MISTAKES THAT COULD CAUSE SERIOUS

INJURY, DO NOT PLUG IN THE GRASS TRIMMER UNTIL THE

FOLLOWING STEPS HAVE BEEN READ AND UNDERSTOOD.

General Safety Rules - continued

12. MAINTAIN TOOLS PROPERLY. ALWAYS keep tools clean and in good

working order.

13. CHECK FOR DAMAGED PARTS. Check for alignment of moving parts,

binding, breakage or any other conditions that may affect the tool’s

operation. Any part that is damaged should be properly repaired or

replaced before use.

14. KEEP THE HANDLE DRY, CLEAN AND FREE OF OIL AND GREASE.

Always use a clean cloth when cleaning. Do not use solvents, brake fluids,

gasoline, or other petroleum products to clean the tool, because they may

damage plastic parts.

SAVE THESE SAFETY INSTRUCTIONS

ALWAYS WEAR EYE PROTECTION.

A grass trimmer can throw foreign objects into your eyes,

which could cause permanent eye damage.

ALWAYS wear safety goggles (not glasses). Ordinary

eyeglasses have only impact-resistant lenses—they are

NOT safety goggles.

Specific Safety Rules for Grass Trimmers

1. IF YOU ARE NOT thoroughly familiar with using the grass trimmer,

obtain advice from a qualified person.

2. MAKE SURE wiring codes and recommended electrical connections are

observed. The grass trimmer is double insulated. When servicing, use only

identical replacement parts.

3. DO NOT grasp the exposed cutting line when picking up or holding the

grass trimmer.

4. AVOID UNINTENTIONAL STARTING. Don’t carry the plugged-in grass trimmer

with your finger on switch. Make sure the switch is in the OFF position when

plugging in the grass trimmer.

5. DO NOT FORCE THE GRASS TRIMMER. It will do the job better and with

less likelihood of injury when used at the pace for which it was designed.

6. The grass trimmer should be stored indoors in a dry, high, or locked location,

out of children's reach, when not in use.

7. MAKE all adjustments with the switch in the OFF position and the grass

trimmer disconnected from the power source.

8. ALWAYS use accessories provided or recommended by the grass trimmer's

manufacturer.

9. KEEP guards in place and in working order. Keep hands and feet away

from cutting line.

10. WHEN LENGTHENING A NEW CUTTING LINE, be careful of the sharp line

cutter on the guard.

11. KEEP VENTILATION OPENINGS clear of debris.

12. Before using the grass trimmer, remove any stones, sticks, debris or

objects that could become entangled or ejected by the grass trimmer.

SAVE THESE SAFETY INSTRUCTIONS

⁄WARNING: NEVER REACH UNDER THE GRASS TRIMMER

(CUTTING LINE AREA) UNTIL IT HAS COMPLETELY STOPPED. THE

GRASS TRIMMER’S CUTTING LINE WILL CONTINUE TO ROTATE FOR A

FEW SECONDS AFTER IT IS SWITCHED OFF.

Electrical Information

GROUNDING INSTRUCTIONS

IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides

the path of least resistance for electric current, and reduces the risk of electric

shock. This tool is equipped with a POLARIZED plug. The plug MUST be

plugged into a matching grounded extension cord in accordance with ALL local

codes and ordinances.

DO NOT MODIFY THE PLUG PROVIDED. If it will not fit the properly grounded

extension cord, have the proper outlet installed by a qualified electrician.

SAVE THESE SAFETY INSTRUCTIONS

⁄WARNING: TO AVOID ELECTROCUTION:

1. Use only identical replacement parts when servicing a tool with double

insulation. Servicing should be performed by a qualified technician.

2. Do not use in wet or damp areas or expose to rain.

⁄WARNING: DOUBLE INSULATION DOES NOT TAKE THE PLACE OF

NORMAL SAFETY PRECAUTIONS WHEN OPERATING THIS TOOL.

⁄WARNING:USE ONLY IDENTIFICAL REPLACEMENT PARTS WHEN

SERVICING THE GRASS TRIMMER, TO AVOID INJURY.

⁄WARNING:

TO AVOID ELECTRICAL HAZARDS, FIRE HAZARDS, OR

DAMAGE TO THE TOOL, USE PROPER CIRCUIT PROTECTION. YOUR

GRASS TRIMMER IS WIRED AT THE FACTORY FOR 120 V OPERATION.

CONNECT TO A 120 V, 15 A CIRCUIT, AND USE A 15 A TIME-DELAYED

FUSE OR CIRCUIT BREAKER. TO AVOID SHOCK OR FIRE, IF THE

EXTENSION CORD IS WORN, CUT OR DAMAGED IN ANY WAY,

REPLACE IT IMMEDIATELY.

DOUBLE INSULATED

This grass trimmer has a plug that looks like the one shown in Fig. A.

The grass trimmer is double insulated to

provide a double thickness of insulation

between you and the tool’s electrical

system. All exposed metal parts are

isolated from the internal metal motor

components with protective insulation.

1) 2-pronged plug

2) Properly grounded extension cord

Fig. A

Electrical Information - continued

CAUTION! ALWAYS MAKE SURE THAT YOUR OUTLET IS PROPERLY

GROUNDED. IF UNCERTAIN, HAVE IT CHECKED BY A CERTIFIED

ELECTRICIAN.

GUIDELINES FOR USING EXTENSION CORDS

USE THE PROPER EXTENSION CORD. Make sure your extension cord is in

good condition. When using an extension cord, be sure to use one heavy

enough to carry the current your product will draw. An undersized cord will cause

overheating. The table below shows the correct size to use depending on cord

length and nameplate ampere rating. If in doubt, use the next heavier gauge.

The smaller the gauge number, the heavier the cord.

Minimum Gauge for Extension Cords (AWG)

(when using 120 V only)

Make sure your extension cord is properly wired and in good electrical condition.

Always replace a damaged extension cord or have it repaired by a qualified

person before use. Keep extension cords away from sharp objects,

excessive heat and damp or wet areas.

Use a separate electrical circuit for your tools. This circuit should comprise a wire of

at least 12 gauge and should be protected with a 15 A time-delayed fuse. Before

connecting the motor to the power line, make sure the switch is in the OFF

position and the electric current is identical to that stamped on the

motor nameplate. Running at a lower voltage will damage the motor.

SAVE THESE SAFETY INSTRUCTIONS

Ampere Rating Total Length of Cord in Feet (meters)

More Than Not More Than 25' (7.6 m) 50' (15 m) 100' (30.4 m) 150' (45.7 m)

0 6 18 16 16 14

6 10 18 16 14 12

10 12 16 16 14 12

12 16 14 12 Not Recommended

⁄WARNING: THIS GRASS TRIMMER IS FOR OUTDOOR USE ONLY.

DO NOT EXPOSE TO RAIN OR USE IN DAMP LOCATIONS.

⁄WARNING: ALTHOUGH THIS TOOL IS DOUBLE INSULATED, THE

EXTENSION CORD AND RECEPTACLE MUST STILL BE GROUNDED

WHILE IN USE TO PROTECT THE OPERATOR FROM ELECTRICAL

SHOCK.

Know Your Grass Trimmer

Edge guide

Dual line spool

Guard

Motor housing

Telescoping boom

Auxiliary handle

adjustment knob

Power switch

Cord lock

2-pronged plug

Pivoting head

adjustment button

Assembly and Adjustments

UNPACKING (Fig. 1)

NOTE: Do not discard the box or any packing material until all parts have been examined.

４

Fig. 1

⁄WARNING: IF ANY PART OF THE GRASS TRIMMER IS MISSING

OR DAMAGED, DO NOT PLUG THE GRASS TRIMMER IN UNTIL THE

DAMAGED PART IS REPAIRED OR REPLACED.

1. Grass trimmer

2. Guard

3. Edge guide

5. Guard screw (Pre-installed to motor head)

BONUS replacement spool

The grass trimmer is fully assembled except for the guard that must be attached

before use. Remove the grass trimmer (1), the guard and the bonus replacement spool

(4) from the packaging.

Assembly and Adjustments - continued

ASSEMBLY INSTRUCTIONS

The guard must be attached to the grass trimmer's head before use.

⁄WARNING: TO AVOID INJURY, ALWAYS TURN THE SWITCH OFF

AND DISCONNECT THE GRASS TRIMMER FROM THE POWER OUTLET

BEFORE INSTALLING OR CHANGING THE TRIMMER LINE OR MAKING

ANY ADJUSTMENTS.

Install the Guard (Fig. 2)

Fig.

1. Invert the grass trimmer to access the

trimmer head.

2. Using a Phillips head screwdriver, remove the pre-installed screw (1) from

the

3. Place the guard (2) on to the trimmer head and turn the guard 90° following

the track on the head.

4. Align the screw hole on the guard with

the screw hole on the trimmer head.

5. Insert the screw into the trimmer head

, fastening the guard in place.

trimmer head.

(1) DOWN

Inhaltsverzeichnis

Andere Yard Works Trimmer Handbücher

Yard Works

Yard Works 060-1979-2 Bedienungsanleitung

Yard Works

Yard Works 060-2341-2 Bedienungsanleitung

Yard Works

Yard Works 60-2241-0 Bedienungsanleitung

Yard Works

Yard Works Grass trimmer/edger Bedienungsanleitung

Yard Works

Yard Works 060-2359-2 Bedienungsanleitung

Yard Works

Yard Works RS25CCPR Bedienungsanleitung

Yard Works

Yard Works 060-2288-0 Bedienungsanleitung

Yard Works

Yard Works CGT48CU Bedienungsanleitung

Yard Works

Yard Works 60-2310-6 Bedienungsanleitung

Yard Works

Yard Works YW2500 Bedienungsanleitung

Yard Works

Yard Works 060-2288-0 Bedienungsanleitung

Yard Works

Yard Works YW2510 Bedienungsanleitung

Yard Works

Yard Works 060-2370-2 Bedienungsanleitung

Yard Works

Yard Works CGT48BCU Bedienungsanleitung

Yard Works

Yard Works 060-3014-6 Bedienungsanleitung

Yard Works

Yard Works 060-2371-0 Bedienungsanleitung

Yard Works

Yard Works 60-3023-4 Bedienungsanleitung

Yard Works

Yard Works 60-2293-6 Bedienungsanleitung

Yard Works

Yard Works 267- 4910 Bedienungsanleitung

Yard Works

Yard Works 060-2372-8 Bedienungsanleitung

Yard Works

Yard Works 060-2342-0 Bedienungsanleitung

Yard Works

Yard Works LHT12021-1 Bedienungsanleitung

Yard Works

Yard Works 60-3014-6 Bedienungsanleitung

Yard Works

Yard Works LST22012-1 Bedienungsanleitung

Beliebte Trimmer Handbücher anderer Marken

MTD

MTD HT 51 E Bedienungsanleitung

McCulloch

McCulloch T22 LS Bedienungsanleitung

COCKRAFT

COCKRAFT PRO HL36-S Bedienungsanleitung

Grizzly

Grizzly CT 1800 Li Bedienungsanleitung

Peco

Peco Z Trimmer ZT-3000 Bedienungsanleitung

Solo

Solo 116 Bedienungsanleitung

Stiga

Stiga ST 1200 Bedienungsanleitung

Echo

Echo GT-225 - 10-09 Bedienungsanleitung

RedMax

RedMax BT17 Bedienungsanleitung

GreenWorks

GreenWorks STA806 Bedienungsanleitung

Parkside

Parkside PHSL 900 A3 Bedienungsanleitung

Gardeo

Gardeo PRO GPTHT2560 Bedienungsanleitung

Park

Park DT-810870 Bedienungsanleitung

Worx

Worx WG209 Bedienungsanleitung

Gardenline

Gardenline 43671/HTKS26 Bedienungsanleitung

Makita

Makita 3710 Bedienungsanleitung

Champion

Champion 100683 Bedienungsanleitung

Stihl

Stihl FS 311 Bedienungsanleitung