YASKAWA VS MINI J7 Bedienungsanleitung

VS mini J7 Series

Instruction Manual

COMPACT GENERAL-PURPOSE INVERTER

VOLTAGE VECTOR CONTROL)

PREFACE

YASKAWA’s VS mini J7 is a compact and simple

inverter that is as easy to use as a contactor. This

instruction manual describes installation, maintenance,

inspection, troubleshooting, and specifications of the

VS mini J7. Read this instruction manual thoroughly

before operation.

YASKAWA ELECTRIC CORPORATION

General Precautions

• Some drawings in this manual are shown with the protective covers and shields

removed, in order to illustrate detail with more clarity. Make sure all covers and

shields are replaced before operating this product.

• This manual may be modified when necessary to reflect improvements to the

product, or changes in specifications.

Such modifications are denoted by a revised manual No.

• To order a copy of this manual, contact your Y SK W representative.

• Y SK W is not responsible for any modification of the product made by the

user. ny modifications will void the warranty.

CONTENTS

NOTES FOR SAFE OPERATION. . . . . . . . . . . . . . . . . . . . . 5

1. RECEIVING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

•Checking the Name Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2. IDENTIFYING THE PARTS . . . . . . . . . . . . . . . . . . . . . . 13

3. SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

•Standard Specifications 200V Class) . . . . . . . . . . . . . . . . . . 15

•Standard Specifications 400V Class) . . . . . . . . . . . . . . . . . . 18

•Standard Wiring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

•Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

•Parameters List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

4. MOUNTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

•Choosing a Location to Mount the Inverter . . . . . . . . . . . . . . 35

•Mounting Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

•Mounting/Removing Components . . . . . . . . . . . . . . . . . . . . . 37

5. WIRING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

•Wiring Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

•Wire and Terminal Screw Sizes . . . . . . . . . . . . . . . . . . . . . . 39

•Wiring the Main Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

•Recommended Peripheral Devices . . . . . . . . . . . . . . . . . . . . 43

•Wiring the Control Circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

•Wiring Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

6. OPERATING THE INVERTER . . . . . . . . . . . . . . . . . . . . 47

•Test Run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

•Operating the Digital Operator. . . . . . . . . . . . . . . . . . . . . . . . 49

•LED Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

•Simple Data Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

7. PROGRAMMING FEATURES . . . . . . . . . . . . . . . . . . . . 57

•Parameter Set-up and Initialization . . . . . . . . . . . . . . . . . . . .57

•Setting V/f pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

•Switching LOCAL/REMOTE Modes . . . . . . . . . . . . . . . . . . . 61

•Selecting Run/Stop Commands. . . . . . . . . . . . . . . . . . . . . . .62

•Selecting Frequency Reference . . . . . . . . . . . . . . . . . . . . . . 63

•Setting Operation Condition . . . . . . . . . . . . . . . . . . . . . . . . .65

•Selecting Stopping Method . . . . . . . . . . . . . . . . . . . . . . . . . .82

•Building Interface Circuits with External Devices. . . . . . . . . . 84

•Setting Frequency by Current Reference Input . . . . . . . . . . . 89

•Decreasing Motor Speed Fluctuation . . . . . . . . . . . . . . . . . . 93

•Motor Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

•Selecting Cooling Fan Operation. . . . . . . . . . . . . . . . . . . . . .96

•Using MEMOBUS MODBUS) Communications

when option card is installed). . . . . . . . . . . . . . . . . . . . . . .96

8. MAINTENANCE AND INSPECTION . . . . . . . . . . . . . . . 99

•Periodical Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

•Part Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

9. FAULT DIAGNOSIS AND CORRECTIVE ACTIONS. . 103

APPENDIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

•CE Conformance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

NOTES FOR SAFE OPERATION

Read this instruction manual thoroughly before installation, operation, maintenance or

inspection of the VS mini. In this manual, NOTES FOR S FE OPER TION are

classified as “W RNING” or “C UTION”.

Indicates a potentially hazardous situation which, if not avoided, could result in death

or serious injury to personnel.

Indicates a potentially hazardous situation which, may result in minor or moderate

injury to personnel, and possible damage to equipment if not avoided. It may also be

used to alert against unsafe practices.

Items described in may also result in a vital accident in some situations. In

either case, follow these important notes.

RECEIVING

WARNING

CAUTION

These are steps to be taken to ensure proper operation.

CAUTION

(Ref. page)

• Do not install or operate any inverter which is damaged or

has missing parts.

Failure to observe this caution may result in personal injury or

equipment damage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

CAUTION

MOUNTING

WIRING

CAUTION

(Ref. page)

• Lift the inverter by the cooling fin. When moving the unit, never

lift by the plastic case or the terminal covers.

Failure to observe this caution may cause the unit to be dropped resulting in

damage to the unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

• Mount the inverter on nonflammable material i.e., metal).

Failure to observe this caution can result in a fire. . . . . . . . . . . . . . . . . . . . . . . 13

• When mounting open chassis in an enclosure, install a fan

or other cooling device to keep the intake air temperature

below 122°F 50°C).

Overheating may cause a fire or damage to the unit. . . . . . . . . . . . . . . . . . . . . 35

• The VS mini J7 generates heat. For effective cooling, mount it

vertically.

Refer to the figure in “Mounting Dimensions” on page 16.

WARNING

(Ref. page)

• Start wiring only after verifying that the power supply

is turned OFF for at least one minute, and all LED’s and

change LED’s are extinguished.

Failure to observe this warning can result in electric shock

or fire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

• Wiring should be performed only by qualified personnel.

Failure to observe this warning can result in electric shock

or fire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

• When wiring the emergency stop circuit, check the wiring

thoroughly before operation.

Failure to observe this warning can result in personal injury. . . . . . . . . . . . . . 39

WARNING

(Ref. page)

• For 400V class, make sure to ground the supply neutral.

• Make sure to ground the ground terminal according to the

local ground code.

Failure to observe this warning can result in electric shock

or fire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

CAUTION

(Ref. page)

• Verify that the inverter rated voltage coincides with the

AC power supply voltage.

Failure to observe this caution can result in personal injury

or fire.

• Do not perform a withstand voltage test of the inverter.

It may cause semi-conductor elements to be damaged.

• Make sure to tighten terminal screws of the main circuit

and the control circuit.

Failure to observe this caution can result in a malfunction,

damage or a fire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

• Never connect the AC main circuit power supply to output

terminals U, V and W.

The inverter will be damaged and void the warranty. . . . . . . . . . . . . . . . . . . . 42

• Do not connect or disconnect wires or connectors while

power is applied to the circuit.

Failure to observe this caution can result in personal injury.

• Do not change signal/control wiring during operation.

The machine or the inverter may be damaged.

OPERATION

WARNING

(Ref. page)

• Only turn ON the input power supply after replacing the

digital operator or optional blank cover.

Do not remove the digital operator or the covers while

current is flowing.

Failure to observe this warning can result in electric shock.

• Never operate the digital operator or dip switches when

your hand is wet.

Failure to observe this warning can result in electric shock.

• Never touch the terminals while current is flowing, even

when the inverter is stopped.

Failure to observe this warning can result in electric shock.

• When the fault retry function is selected, stand clear of

the inverter or the load. It may restart unexpectedly

after being stopped.

(Construct machine system, so as to assure safety for personnel,

even if the inverter should restart.) Failure to observe this

warning can result in personal injury.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

• When continuous operation after power recovery is selected,

stand clear of the inverter or the load. It may restart

unexpectedly after being stopped.

(Construct machine system, so as to assure safety for personnel,

even if the inverter should restart.) Failure to observe this

warning can result in personal injury.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

• Since the digital operator stop button can be disabled by a

parameter setting, install a separate external emergency stop switch.

Failure to observe this warning can result in personal injury.

• If an alarm is reset with the operation signal ON, the inverter

restarts automatically. Only reset the alarm after verifying that

the operation signal is OFF.

Failure to observe this warning can result in personal injury. . . . . . . . . . . . . . 46

MAINTENANCE AND INSPECTION

CAUTION

(Ref. page)

• Never touch the heatsink or braking resistor, the

temperature is very high.

Failure to observe this caution can result in harmful burns

to the body.

• Since it is easy to change operation speed from low to

high speed, verify the safe working range of the motor

and machine before operation.

Failure to observe this caution can result in personal injury

and machine damage.

• Install a holding brake separately if necessary.

Failure to observe this caution can result in personal injury.

• Do not change signals during operation.

The machine or the inverter may be damaged.

• All the parameters of the inverter have been preset at

the factory. Do not change the settings unnecessarily.

The inverter may be damaged. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

WARNING

(Ref. page)

• Never touch high-voltage terminals in the inverter.

Failure to observe this warning can result in an electrical shock. . . . . . . . . . . 99

• Disconnect all power before performing maintenance or

inspection. Then wait at least one minute after the power

supply is disconnected and all LEDs and CHARGE LED

are extinguished.

The capacitors discharge slowly, and may be dangerous. . . . . . . . . . . . . . . . . 99

Others

WARNING

(Ref. page)

• Do not perform a voltage withstand test on any part of

the VS mini J7.

This electronic equipment uses semiconductors and it is vulnerable

to high voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

• Only authorized personnel should perform

maintenance, inspections or parts replacement.

[Remove all metal objects (watches, bracelets, etc.) before operation.]

(Use tools which are insulated against electrical shock.)

Failure to observe this warning can result in an electrical shock. . . . . . . . . . . 99

CAUTION

(Ref. page)

• The control PC board employs CMOS ICs.

Do not touch the CMOS elements.

They are easily damaged by static electricity.

• Do not connect or disconnect wires, digital operator,

connectors, or cooling fan while power is applied to the circuit.

Failure to observe this caution can result in personal injury. . . . . . . . . . . . . . . 99

WARNING

(Ref. page)

• Never modify the product.

Failure to observe this warning can result in an electrical shock or

personal injury and will void the warranty.

Andere Handbücher für VS MINI J7

Dieses Handbuch passt für folgende Modelle

Andere YASKAWA Wechselrichter Handbücher

YASKAWA

YASKAWA Varispeed L7 Bedienungsanleitung

YASKAWA

YASKAWA VS-626M5 Bedienungsanleitung

YASKAWA

YASKAWA FSDrive-MV1S Bedienungsanleitung

YASKAWA

YASKAWA VS MINI J7 Bedienungsanleitung

YASKAWA

YASKAWA SOLECTRIA XGI 1500 Series Betriebsanleitung

YASKAWA

YASKAWA E7U Betriebsanleitung

YASKAWA

YASKAWA PVI 36TL Bedienungsanleitung

YASKAWA

YASKAWA Solectria PVI 25TL-480-R Betriebsanleitung

YASKAWA

YASKAWA VS mini C Series Bedienungsanleitung

YASKAWA

YASKAWA Varispeed V7 Series Bedienungsanleitung

YASKAWA

YASKAWA SOLECTRIA XGI 1500 Series Bedienungsanleitung

YASKAWA

YASKAWA VS MINI J7 series Bedienungsanleitung

YASKAWA

YASKAWA Varispeed-676 Bedienungsanleitung

YASKAWA

YASKAWA SOLECTRIA XGI 1500-DCG Series Betriebsanleitung

YASKAWA

YASKAWA GPD 505/P5 Programmierhandbuch

YASKAWA

YASKAWA PROFINET V1000 Bedienungsanleitung

YASKAWA

YASKAWA CIMR-MC5A20P4 Bedienungsanleitung

YASKAWA

YASKAWA VS MINI J7 Bedienungsanleitung

YASKAWA

YASKAWA CIMR-F7A Bedienungsanleitung

YASKAWA

YASKAWA Varispeed G7 Series Bedienungsanleitung

YASKAWA

YASKAWA Varispeed CIMR-G7A Bedienungsanleitung

YASKAWA

YASKAWA Varispeed-606PC3 Bedienungsanleitung

YASKAWA

YASKAWA PVI 23 TL Bedienungsanleitung

YASKAWA

YASKAWA PVI 60TL Bedienungsanleitung

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE GEP Bedienungsanleitung

Astrel Group

Astrel Group Power Reducer Kurzanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung