YAT FPCS1800A Bedienungsanleitung

材质符合欧盟包装指令(94/62/EC)
TEL:0573-83225888-503 Http:www.yattool.com
名 称:
客 户:
料 号:
成品尺寸:
材 质:
说明书
CH045
8458-433400X106-031
A5(148.5x210mm)
80g铜版纸
颜 色:
页 数:
黑白印刷
13张A4纸
设计人员: 邮箱:
梁光灿
2022-11-15 Adobe Acrobat 9 Pro
制作日期: 运用软件:
备注:
高度 > 5mm
高度 > 5mm 高度 > 7mm 高度 > 5mm

1800W Electric
Chain Saw
FPCS1800A
EAN: 3663602627401
Original Instructions_MNL_FPC18000_EN_V3_BX220IM_20200901

FPCS1800A
02
EN
Getting started...
These instructions are for your safety. Please read through them thoroughly
before use and retain them for future reference.
Safety information
Your product
Before you start
03
16
18
Getting started... 02
In more detail... 25
26
29
37
44
45
46
47
48
Product functions
Operation
Care and maintenance
Trouble shooting
Recycling and disposal
Guarantee
Technical specications
EC declaration of conformity
EN
Let’s
get started...

03
FPCS1800A EN
Getting started...
Safety information
Safety warnings
Work area safety
> Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
> Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
> Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
> Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
> Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges
General power tool safety warnings
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury. Save all warnings
and instructions for future reference.The
term “power tool” in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.

FPCS1800A
04
EN
Getting started...
Safety information
and refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
> Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
> Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
> When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
> If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
Personal safety
> Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the influence of drugs, alcohol
or medication. A moment of inattention while
operating power tools may result in serious
personal injury.
> Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
> Prevent unintentional starting. Ensure the

05
FPCS1800A EN
Getting started...
Safety information
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools
with your finger on the switch or energising power
tools that have the switch on invites accidents.
> Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
> Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
> Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving
parts.
> If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
Power tool use and care
> Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
> Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
> Disconnect the plug from the power source
and/or the battery pack from the power tool

FPCS1800A
06
EN
Getting started...
Safety information
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
> Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
> Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
> Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
> Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from those intended
could result in a hazardous situation.
Service
> Have your power tools serviced by a qualied
repair person using only identical replacement
parts. This will ensure that safety of the power
tool is maintained.
Chain saw safety warnings
> Keep all parts of the body away from the saw

07
FPCS1800A EN
Getting started...
Safety information
chain when the chain saw is operating. Before
you start the chain saw, make sure the saw
chain is not contacting anything. A moment of
inattention while operating chain saws may cause
entanglement of your clothing or body with the
saw chain.
> Always hold the chain saw with your right
hand on the rear handle and your left hand on
the front handle. Holding the chain saw with a
reversed hand configuration increases the risk of
personal injury and should never be done. Hold
the power tool by insulated gripping surfaces only,
because the saw chain may contact hidden wiring
or its own cord. Saw chains contacting a "live"
wire may make exposed metal parts of the power
tool "live" and could give the operator an electric
shock.
> Wear safety glasses and hearing protection.
Further protective equipment for head, hands,
legs and feet is recommended. Adequate
protective clothing will reduce personal injury by
flying debris or accidental contact with the saw
chain.
> Do not operate a chain saw in a tree. Operation
of a chain saw while up in a tree may result in
personal injury.
> Always keep proper footing and operate the
chain saw only when standing on xed, secure
and level surface. Slippery or unstable surfaces
such as ladders may cause a loss of balance or
control of the chain saw.
> When cutting a limb that is under tension be
alert for spring back. When the tension in the

FPCS1800A
08
EN
Getting started...
Safety information
wood fibres is released the spring loaded limb
may strike the operator and/or throw the chain
saw out of control.
> Use extreme caution when cutting brush and
saplings. The slender material may catch the
saw chain and be whipped toward you or pull you
off balance.
> Carry the chain saw by the front handle with
the chain saw switched off and away from
your body. When transporting or storing the
chain saw always t the guide bar cover.
Proper handling of the chain saw will reduce the
likelihood of accidental contact with the moving
saw chain.
> Follow instructions for lubricating, chain
tensioning and changing accessories.
Improperly tensioned or lubricated chain may
either break or increase the chance for kickback.
> Keep handles dry, clean, and free from oil and
grease. Greasy, oily handles are slippery causing
loss of control.
> Cut wood only. Do not use chain saw for
purposes not intended. For example: do not
use chain saw for cutting plastic, masonry or
non-wood building materials. Use of the chain
saw for operations different than intended could
result in a hazardous situation.
Causes and operator prevention of kickback
Kickback may occur when the nose or tip of the
guide bar touches an object, or when the wood
closes in and pinches the saw chain in the cut.
Tip contact in some cases may cause a sudden

09
FPCS1800A EN
Getting started...
Safety information
reverse reaction, kicking the guide bar up and back
towards the operator.Pinching the saw chain along
the top of the guide bar may push the guide bar
rapidly back towards the operator.
Either of these reactions may cause you to lose
control of the saw which could result in serious
personal injury. Do not rely exclusively upon the
safety devices built into your saw. As a chain saw
user, you should take several steps to keep your
cutting jobs free from accident or injury.
Kickback is the result of tool misuse and/or incorrect
operating procedures or conditions and can be
avoided by taking proper precautions as given
below:
Maintain a rm grip, with thumbs and ngers
encircling the chain saw handles, with both
hands on the saw and position your body and
arm to allow you to resist kickback forces.
Kickback forces can be controlled by the operator,
if proper precautions are taken. Do not let go of the
chain saw.
> Do not overreach and do not cut above
shoulder height. This helps prevent unintended
tip contact and enables better control of the chain
saw in unexpected situations.
> Only use replacement bars and chains
specied by the manufacturer. Incorrect
replacement bars and chains may cause chain
breakage and/or kickback.
> Follow the manufacturer’s sharpening and
maintenance instructions for the saw chain.
Decreasing the depth gauge height can lead to
increased kickback.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere YAT Kettensäge Handbücher


















