Yealink BH72 Bedienungsanleitung
BH72 & BH72 Lite
Bluetooth Headset
Quick Start Guide
V1.1
English | Deutsch | Español | Français
Table of Contents
English ...........................................1
Deutsch ........................................10
Español .........................................19
Français .........................................28
1
E
N
G
L
I
S
H
Package List
1
Note: We recommend that you use the included accessories, and other accessories may have
compatibility issues that prevent them from working properly.
BH72(BH72 Lite)
USB 2.0 Cable
(USB-A to USB-C)
Carrying Case
Quick Start Guide
BT51-A Dongle or
BT51-C Dongle
BHC76 Wireless
Charging Stand
Power Adapter
Optional
Quick Start Guide
or
2
Charging
2
L
USB Charging Wireless Charging (optional)
LED Indicator Status
Note: It takes two hours for USB charging and three hours for wireless charging to be fully
charged.
Note:
• We recommend to fully charge the headset when using it for the rst time. BH72 Lite does
not support wireless charging.
• The BHC76 is compatible with devices that support QI wireless charging, such as wireless
charging mobile phones and headsets.
Red
Charging
Green
Fully Charged Green
Align the
charging area
3
3
Power on/off
"power on,
XX % battery
remains"
"power off"
Red
Green
Hold 2s
Power on
Power off
LED Indicator
No Built-in Bluetooth Device
Power On State Already pre-paired when leaving the
factory , automatically connected
4
Pairing and Connecting Device
4
Yealink BH72
Note: If your desk phone/PC does not have built-in Bluetooth, you need to use the BT51 dongle
to pair the headset. When the BT51 dongle is plugged into the desk phone/PC and the headset
is power on, the desk phone/PC and BT51 dongle will automatically connect.
Step1: Enter Pairing Mode
"pairing mode"
Power off State
Power on State
Step2: Select the Headset from Your Bluetooth Device
Hold 5s
"power on, XX %
battery remains.
pairing mode"
Hold 3s
ON
"mobile one
connected"
Flashing Red and Green Alternately
Flashing Red and Green Alternately
Built-in Bluetooth Device
5
Call Controls and Busylight
5
Flash Red
Trying to Connect to
Teams
Connect to Teams
Successfully
Solid Red
Flash Purple
Solid Purple
Talking
Incoming Call
Busylight
Press
1X
Accept
End
Reject
or
Push
Mute
or
Note: Only the Teams edition can connect to Teams.
Pull
Multi-function Button
Press
1X
Press
2X
Press
1X
Multi-function
Button
6
Music Controls
6
Customers Button
7
Hold
Press
1X
"XX % battery remains.
PC connected,mobile
one connected"
1.5s
Hold
1.5s
Press
1X
Press
1X
Open Teams Notication
Hold
2s
Siri, Google assistant...,
depending on mobile phone.
Press
1X
Activate Voice Assistant
Check the Battery and
Device Connection Status
Press
1X
Teams Edition
Teams/UC Edition:
7
8
Replace Ear Cushions
Yealink USB Connect (PC)
Yealink Connect App (Mobile）
Download it from the Yealink website https://www.yealink.com/product/yuc.
9
Apple and the Apple logo are trademarks of Apple Inc.
Download the Yealink Connect App from IOS App Store or Android App Store.
Software Management
Note: It needs to be used with Yealink USB Connect of version 0.34.x.x or higher.
8
1. Please use the power adapter provided by Yealink to get a more efcient charging ex-
perience.
2. Please do not place any metal and magnetic cards on the charging board to avoid
abnormalities and damage to the charger.
3. Please do not charge too far away from the charging sign to get a more efficient
charging experience.
4. During use, if you nd the charging board or the charged device is overheated and the
charging stops (the indicator light keeps ashing), you need to remove the charged
device until it cools down, and then try charging again.
5. The indicator light of the charging stand keeps ashing, and it may be the following
three situations:
• The location of the charged device is not placed correctly. You need to replace the it.
After calibrating the charging position, you can charge the device normally until the
indicator light is always on.
• The charging stand has an overheating alarm. After the mobile phone or the charging
stand cools down, it will stop ashing automatically and enter the normal charging
state.
• Metal or magnetic cards may be placed on the charging board, and please remove
them.
Notes for BHC76 (optional)
Safety Guide for BHC76 (optional)
1. Do not disassemble the product by yourself or bring it near re and water to avoid
short circuit leakage or damage to the product.
2. Do not use the product in high temperature, humidity, and corrosive environment to
avoid damaging the circuit and causing failure to charge or other failures.
3. Do not expose the product to corrosive liquids. Otherwise, it will cause severe damage.
4. Do not disassemble or re-equip the product for any reason to avoid secondary failure
and burnout.
5. Do not place the product below -10°C or above 60°C.
6. Do not knock, throw or shake the product because rough methods will damage the
internal circuit board structure.
If you need to know the product warranty information, please visit
https://ams.yealink.com.
Andere Handbücher für BH72
4
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Sprachen:
Andere Yealink Headset Handbücher
Yealink
Yealink WH67 In Ear Bedienungsanleitung
Yealink
Yealink WH63 In Ear Bedienungsanleitung
Yealink
Yealink UH38 Mono Bedienungsanleitung
Yealink
Yealink BH72 Bedienungsanleitung
Yealink
Yealink W60 Series Bedienungsanleitung
Yealink
Yealink Yealink SIP-T28P Bedienungsanleitung
Yealink
Yealink UH36 Mono Bedienungsanleitung
Yealink
Yealink UH38 Mono Bedienungsanleitung
Yealink
Yealink WH6 Series Bedienungsanleitung
Yealink
Yealink WH63 Bedienungsanleitung
Yealink
Yealink WH6 Series Bedienungsanleitung
Yealink
Yealink UH34 Bedienungsanleitung
Yealink
Yealink WH67 Bedienungsanleitung
Yealink
Yealink W70B DECT Bedienungsanleitung
Yealink
Yealink WH62 Mono Bedienungsanleitung
Yealink
Yealink UH34 Bedienungsanleitung
Yealink
Yealink WH63 Bedienungsanleitung
Yealink
Yealink WH6 Series Bedienungsanleitung
Yealink
Yealink UH38 Mono Bedienungsanleitung
Yealink
Yealink UH37 Mono Bedienungsanleitung
