Yealink SIP-T57W Bedienungsanleitung

Prime Business Phone

SIP-T57W

English | Deutsch | Español | Français

Quick Start Guide (V84.10)

www.yealink.com Applies to ﬁrmware version 97.84.0.10 or later.

Table of Contents

English ............................................................1

Deutsch.........................................................12

Español..........................................................23

Français .........................................................34

Package Contents

The following items are included in your package. If you ﬁnd anything missing, contact your system administrator.

Handset Cord Ethernet Cable

(2m CAT5E FTP cable)

IP Phone Handset Quick Start Guide Power Adapter

(Optional)

Wall Mount Bracket

(Optional)

Note: We recommend that you use the accessories provided or approved byYealink. The use of unapproved third-party accessories

may result in reduced performance.

Assembling the Phone

1. Attach the stand and adjust the angle of the touch screen, as shown below:

2. Connect the handset and optional headset, as shown below:

Note: The headset should be purchased separately.

Stand

PUSH

ＰＣＩｎｔｅｒｎｅｔ

ＤＣ５Ｖ

ＰＣＩｎｔｅｒｎｅｔ

ＤＣ５Ｖ

ＰＣＩｎｔｅｒｎｅｔ

ＤＣ５Ｖ

3. Connect the optional USB ﬂash drive, as shown below:

Note: The USB port can also be used to connect color-screen expansion module EXP50, USB headset or DECT dongle kit DD10K.

Note: The IP phone should be used with Yealink original power adapter (5V/2A) only. The use of the third-party power adapter may

cause the damage to the phone.

ＰＣＩｎｔｅｒｎｅｔ

ＤＣ５Ｖ

4. Connect the AC power or PoE, as shown below:

AC Power Option

PoE ( Power over

Ethernet ) Option

Power Adapter

(DC 5V)

IEEE 802.3af compliant

PoE Hub/Switch

ＰＣＩｎｔｅｒｎｅｔ

ＤＣ５Ｖ

ＰＣＩｎｔｅｒｎｅｔ

ＤＣ５Ｖ

ＰＣＩｎｔｅｒｎｅｔ

ＤＣ５Ｖ

Note: If you are connecting a PC to your phone, we recommend that you use the Ethernet cable provided by Yealink.

b) Connect to the wireless network:

1) Tap

Basic

Wi-Fi

2) Turn on Wi-Fi.

The phone will automatically search for available wireless networks in your area.

3) Select an available wireless network from the list of networks.

4) If the network is secure, enter its password in the

Password

ﬁeld.

5) Tap

Connect

to connect to the wireless network.

After the IP phone is connected to the network and supplied

with power, it automatically begins the initialization process.

After startup, the phone is ready for use. You can conﬁgure

the phone via web user interface or phone user interface. Welcome

Initializing... Please wait

Startup

5. Connect to the network, as shown below:

You have two options for network connection. You can select one of them according to the current oﬃce environment.

a) Connect to the wired network:

PC Connection

(Optional)

ＰＣＩｎｔｅｒｎｅｔ

ＤＣ５Ｖ

ＰＣＩｎｔｅｒｎｅｔ

ＤＣ５Ｖ

Conﬁguring Your Phone

Conﬁguring via web user interface

Accessing the web user interface:

1. Tap

Status

to obtain the IP address of the phone.

2. Open a web browser on your computer, enter the IP address into the address bar (e.g., "http://192.168.0.10" or

"192.168.0.10"), and then press

Enter

3. Enter the user name (default: admin) and password (default: admin) in the login page and click

Conﬁrm

Network Settings:

Click on

Network

Basic

IPv4 Conﬁg

You can conﬁgure the network settings in the following ways:

DHCP:

By default, the phone attempts to contact a DHCP server in your network to obtain its valid network

settings, e.g., IP address, subnet mask, gateway address and DNS address.

If the phone cannot contact a DHCP server for any reason, you need to conﬁgure IP address, subnet mask,

gateway address, primary DNS address and secondary DNS address for the phone manually.

Static IP

Address:

Note: The IP phone also supports IPv6, but IPv6 is disabled by default.

The wrong network settings may result in inaccessibility of your phone and may have an impact on the network performance.

Contact your system administrator for more information.

Account Settings:

Click on

Account

Account X

(X=1, 2, 3...15, 16)

Parameters of the account:

Line Active: You can select Enabled/Disabled to enable/disable the account.

Label: It is shown on the touch screen to identify the account.

Display Name: It is shown as Caller ID when placing a call.

User Name: It is provided by ITSP for registration (required).

Password: It is provided by ITSP for registration (required).

Server Host: It is provided by ITSP for registration (required).

(Green) Registered (Gray) Register Failed (Green and Flashing) Registering

Note: Check with your system administrator if any error appears during the registration process or a speciﬁc conﬁguration is required

for your registration.

Conﬁguring via phone user interface

Network Settings:

1. Tap Menu->Advanced (default password: admin)->Network->WAN Port->IPv4 to conﬁgure the network.

Account Settings:

1. Tap Menu->Advanced (default password: admin)->Accounts to conﬁgure the account.

Basic Call Features

Placing a Call

Using the handset:

1. Pick up the handset.

2. Enter the number, and then tap Send.

Using the speakerphone:

1. With the handset on-hook, press .

2. Enter the number, and then tap Send.

Using the headset:

1. With the headset connected, press to activate the headset mode.

2. Enter the number, and then tap Send.

Answering a Call

Using the handset:

Pick up the handset.

Using the speakerphone:

Press .

Using the headset:

Press .

Ending a Call

Using the handset:

Hang up the handset or tap the End Call soft key.

Using the speakerphone:

Press or tap the End Call soft key.

Using the headset:

Tap the End Call soft key.

Redial

Press to enter the Placed Calls list, and then tap the desired entry.

Press twice when the phone is idle to dial out the last dialed number.

Call Mute and Un-mute

Press to mute the microphone during a call.

Press again to un-mute the call.

Call Hold and Resume

To place a call on hold:

Press or tap the Hold soft key during an active call.

To resume the call, do one of the following:

If there is only one call on hold, press or tap the Resume soft key.

If there is more than one call on hold, tap the call you want to resume, and press or tap the Resume soft key.

Call Transfer

You can transfer a call in the following ways:

Blind Transfer

1. Press or tap the Transfer soft key during a call. The call is placed on hold.

2. Enter the number you want to transfer to.

3. Press .

Semi-Attended Transfer

1. Press or tap the Transfer soft key during a call. The call is placed on hold.

2. Enter the number you want to transfer to, and then press .

3. Press or tap the Transfer soft key when you hear the ring-back tone.

Attended Transfer

1. Press or tap the Transfer soft key during a call. The call is placed on hold.

2. Enter the number you want to transfer to, and then press .

3. Press or tap the Transfer soft key when the second party answers.

Call Forward

To enable call forward:

1. Tap Menu->Features->Call Forward.

2. Select the desired forward type:

Always Forward----Incoming calls are forwarded unconditionally.

Busy Forward----Incoming calls are forwarded when the phone is busy.

No Answer Forward----Incoming calls are forwarded if not answered after a period of time.

3. Enter the number you want to forward to. For No Answer Forward, tap the After Ring Time ﬁeld, and then tap the

desired ring time to wait before forwarding.

4. Tap Save to accept the change.

Call Conference

1. Tap the Conference soft key during an active call. The call is placed on hold.

2. Enter the number of the second party, and then press or tap Conference.

3. Tap the Conference soft key again when the second party answers. All parties are now joined in the conference.

4. Tap the End Call soft key to disconnect all parties.

Note: You can split the conference call into two individual calls by tapping the

Split

soft key.

Andere Handbücher für SIP-T57W

Inhaltsverzeichnis

Sprachen:

Andere Yealink IP-Telefon Handbücher

Yealink

Yealink T46G Skype For Business Edition Bedienungsanleitung

Yealink

Yealink Yealink SIP-T48G Bedienungsanleitung

Yealink

Yealink Yealink SIP-T28P Bedienungsanleitung

Yealink

Yealink One Talk W78B Bedienungsanleitung

Yealink

Yealink SIP-T42U Bedienungsanleitung

Yealink

Yealink T42S Bedienungsanleitung

Yealink

Yealink SIP-T56A Bedienungsanleitung

Yealink

Yealink T54W Bedienungsanleitung

Yealink

Yealink W53 Series Bedienungsanleitung

Yealink

Yealink SIP-T40P Bedienungsanleitung

Yealink

Yealink Yealink SIP-T28P Bedienungsanleitung

Yealink

Yealink T41 Leitfaden

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Yealink

Yealink SIP-T27G Bedienungsanleitung

Yealink

Yealink Verizon One Talk W60B Bedienungsanleitung

Yealink

Yealink T46G Skype For Business Edition Bedienungsanleitung

Yealink

Yealink T4 series Leitfaden

Yealink

Yealink T48S Skype For Business Edition Bedienungsanleitung

Yealink

Yealink Yealink SIP-T42G Bedienungsanleitung

Yealink

Yealink T41 Bedienungsanleitung

Yealink

Yealink SIP-T2 Series Bedienungsanleitung

Yealink

Yealink IP Phone Bedienungsanleitung

Yealink

Yealink SIP-T19 E2 T4 Series Bedienungsanleitung

Yealink

Yealink SIP VP-T49G Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Cisco

Cisco SPA-500 Series Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Cisco

Cisco 7962 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung

Nortel

Nortel i2050 Bedienungsanleitung

Fiberme

Fiberme FAP260 Series Bedienungsanleitung