Yealink T20P Handbuch

Yealink T20P - initial setup

This guide covers manual configuration of a Yealink T20P phone for use with Orbex services. Please

note that if you have purchased your phone from Orbex you have the option to have an extension setup

on the phone when it is despatched to you - all you need to do is connect the phone.

Connecting the phone

Unpack the phone and cables and plug them together as follows (easiest done with the phone base

upside down):



Connect the base unit and handset together using the curly phone cable. This plugs into the socket with

the handset icon. If using a headset, plug it into the other socket with the headset icon underneath the

base unit (located to the far right of the product label)



Connect the Ethernet socket marked INTERNET to one of the sockets on your router using the

coloured network cable (alternatively, if you are using a hub or switch connect the phone to the

appropriate port on that device)



Connect and plug in the power cable (if required). However, Yealink phones support PoE (Power Over

Ethernet) to power the device if this available at yourlocation

The phone should automatically pick up an IP address (unless DHCP is not enabled on your network -

if this is the case please read the section on setting up an IP address below).

If you have purchased the phone from Orbex and requested that we configure an extension on the

device, then you just need to leave the phone for around five minutes. The device will contact our

servers and the configuration will be downloaded onto the phone (if you encounter any problems with

this, please see this guide for more help).

If you wish to configure the device manually, please read the rest of this text.

Manual Configuration

Switch the power on (if required), and leave the phone to initialise for a minute or two. The phone will

display Initializing Please Wait on the screen.

Setting up a headset

If you have a headset connected to your phone, you can set this to be the default audio device, simply

press the Headset key on the phones keypad, a picture of a headset will be shown on the phones

screen.



To answer a call, use the OK button, pick up the handset or press the Speaker button for hands-free

operation



To make calls, enter the number using the keypad and then pick up the handset. To make a call using

the speakerphone enter the number and press the speaker key



To pick up voicemails, dial *1

Setting an IP address

(Only necessary if you do not use DHCP on your network)



Press the Menu softkey to enter the phones configuration menu



Press 3 for Settings then OK



Press 2 for Advanced Settings, then OK



Using the alphanumeric keypad you now need to enter your admin password, by default this is admin.

Press the OK key



Press 2 for Network then OK



Press 1 for WAN Port then OK



Press 2 for Static IP Client then OK



Using the alphanumeric keypad enter the required IP, Subnet Mask, Gateway and DNS servers, using

the * key to enter a seperating dot (.)

Once complete, select OK, the phone will then reinitialise.

Configuring the Phone

(Only necessary for phones not purchased from Orbex)

Press the Menu softkey followed by 1 to obtain the IP address of the phone.

Using a web browser on a PC connected to the same network enter the IP Address, you will then be

prompted for a username and password, by default both of these values are set to admin (n.b. please

see this help guide if you have purchased the phone from Orbex).

You will then see the Yealink configuration screen, with a number of tabs to click on and the phones

current status.

Click on the Account tab. Next, from the dropdown select the account number you wish to configure,

for most users this will be Account 1.

The important fields here are all provided in your welcome email, or in the VoIP control panel for the

first (default) extension:



Label: This is a description that will be displayed on the phones LCD screen for the account



Display Name: This is normally your name, and is sent when a VoIP to VoIP call is made



Password: The password associated with the extension number



SIP Server: sip.gradwell.com, port 5060 - this is our SIP registration server, which is used by your

phone to register your account



Enable Outbound Proxy Server: If you are behind NAT (your phone IP for example is 192.168.1.5)

then set this to Enabled. If you are unsure if your phone is behind NAT, set this to enabled



Outbound Proxy Server: If you have selected Enabled above, then enter natproxy.gradwell.com, port

5082



Transport: UDP

Once the settings have been entered, click on the Confirm button - the phone will then reinitialise.

Andere Handbücher für T20P

Inhaltsverzeichnis

Andere Yealink IP-Telefon Handbücher

Yealink

Yealink Yealink SIP-T46G Service-Handbuch

Yealink

Yealink VP530 Betriebsanleitung

Yealink

Yealink Yealink SIP-T26P Gebrauchsanweisung

Yealink

Yealink SIP-T29G Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Yealink

Yealink SIP- T28P Bedienungsanleitung

Yealink

Yealink T22P Betriebsanleitung

Yealink

Yealink SIP-T32G Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Yealink

Yealink T42G Bedienungsanleitung

Yealink

Yealink T21-E2 Gebrauchsanweisung

Yealink

Yealink T28 Technisches Handbuch

Yealink

Yealink SIP-T19 E2 T4 Series Bedienungsanleitung

Yealink

Yealink One Talk CP960 Bedienungsanleitung

Yealink

Yealink Yealink SIP-T42G Bedienungsanleitung

Yealink

Yealink T18 Bedienungsanleitung

Yealink

Yealink Gigabit Color Bedienungsanleitung

Yealink

Yealink SIP-T23P Gebrauchsanweisung

Yealink

Yealink SIP-T32G Bedienungsanleitung

Yealink

Yealink SIP-T48S Bedienungsanleitung

Yealink

Yealink VP59 Teams Bedienungsanleitung

Yealink

Yealink SIP-T54W Bedienungsanleitung

Yealink

Yealink Teams Series Service-Handbuch

Yealink

Yealink SIP-T31P Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Cisco

Cisco SPA-500 Series Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Cisco

Cisco 7962 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung

Nortel

Nortel i2050 Bedienungsanleitung

Fiberme

Fiberme FAP260 Series Bedienungsanleitung