Yealink Telkom W52P Bedienungsanleitung

Barracuda Phone System

Yealink W52P Wireless DECT IP Telephone Quick Reference Guide

1 / 5

Yealink W52P Wireless DECT IP Telephone Quick

Reference Guide

This article explains the basic operation of the Yealink W52P Wireless DECT IP telephone.

Yealink Model W52P Wireless DECT Phone and Base Station

Soft Keys

The two buttons immediately below the LCD display are soft keys.

Each soft key performs the action displayed immediately above it.

Soft key behavior is context sensitive – the associated soft key action changes according to the current

phone state.

Place a Call

Dial the number, then press the green oﬀ-hook key.

Redial

To redial the last number, press the green oﬀ-hook key twice.

To view previously dialed numbers, press the green oﬀ-hook key once and then use the up and down

arrow keys to scroll through the list. Press the green oﬀ-hook key to dial the highlighted phone number.

Voicemail Access

To access voicemail messages, dial *98 and press the green oﬀ-hook key.

Depending on your system conﬁguration, you may be prompted for a voicemail PIN number.

Barracuda Phone System

Yealink W52P Wireless DECT IP Telephone Quick Reference Guide

2 / 5

Call Hold

To place an existing call on hold, press the Options soft key then press the Hold soft key.

To retrieve a call on hold, press the Resume soft key.

If two calls are on hold, press the Resume soft key to resume the current call. Use the up/down arrows or

the Swap soft key to swap between the calls.

Call Transfer

To transfer a call that is in progress, press the Options soft key and select either Blind

Transfer or Transfer (for an attended transfer).

Dial the destination number, then press OK.

For a blind transfer, the operation is complete.

For an attended transfer, wait for the destination party to answer, then announce the caller.

Press the Transfer soft key to complete the transfer.

3-Way Calling

Place (or receive) a call.

To add another party to the call, press the Options soft key and select Conference.

Dial the destination number, then press OK.

When the destination party answers, press the Conf. soft key.

Press the red hangup button to end the conference call.

Call Forwarding

When your phone is idle, press OK > > Call Forward. The display will show the lines assigned to the

handset.

Press the up/down arrows to select the desired line, then press OK.

Press the up/down arrows to choose the call forward type, then press OK.

Barracuda Phone System

Yealink W52P Wireless DECT IP Telephone Quick Reference Guide

3 / 5

Select Enabled, then enter the destination number in the Target ﬁeld.

Press the Save soft key to accept the changes.

To cancel call forwarding, follow the same steps and select Disabled in the Status ﬁeld.

Volume Control

When your phone is idle, press the left/right arrow keys to decrease or increase volume, then press

the Save soft key.

During an active call, left/right arrow keys will change the volume of the handset, speakerphone or

headset, whichever is active.

Base Station Setup and Handset Registration

Follow these steps to conﬁgure the base station and to register handsets.

Base Station Diagram

Page key1.

Registration LED2.

Network Status LED3.

Power Indication LED 4.

Base Station Installation

Choose a suitable location for the base station. The base station will need to be near the center of the

wireless coverage area.

Connect the base station to the local area network (LAN) with an Ethernet cable. The unit can be powered

with the supplied A/C adapter or with a power over Ethernet (PoE) port.

If you have automatic provisioning enabled on the Barracuda Phone System and the base station is on

the same subnet as the Barracuda Phone System, then the base station will be updated and ﬁve new

unassigned phones will now be available.

NOTE: Some W52P base stations ship with a ﬁrmware that does not support automatic provisioning. If this is

the case, you will need to manually provision the device. (Instructions below.)

Barracuda Phone System

Yealink W52P Wireless DECT IP Telephone Quick Reference Guide

4 / 5

Handset Registration

Place the supplied rechargeable batteries into the handset.

Charge the handset on the cradle until the charging status icon shows a full charge. Wait until the

handset is fully charged before continuing.

At the base station, press and hold the key for about four seconds. The registration LED will ﬂash

slowly, indicating that the base station is in registration mode.

On the handset, press OK then select > Registration > Register Handset.

Use the up and down arrow keys to select the base station and press OK.

Press OK when the display shows the ID of the base station.

Enter the PIN number: 0000

Press Done key.

The handset will be assigned the next available handset ID, i.e. 1, 2, 3, 4, or 5.

Base Station Manual Provisioning

To manual provision your base station, you will need to know the IP address. You can retrieve this from a

registered handset by pressing OK > Status > OK > System Status > OK.

The default login is Navigate to Phone > Auto Provision. In the Server URL ﬁeld enter the

value http://x.x.x.x/provision/yealink/W52P[2], where x.x.x.x is the IP address of the Barracuda Phone

System.

username = admin

password = admin

Click the Conﬁrm button, then power cycle the base station. When the base station boots back up it will

provision to the Barracuda Phone System.

It may take several minutes for the base station to completely provision.

Barracuda Phone System

Yealink W52P Wireless DECT IP Telephone Quick Reference Guide

5 / 5

Links

Andere Handbücher für Telkom W52P

Inhaltsverzeichnis

Andere Yealink IP-Telefon Handbücher

Yealink

Yealink SIP-T9CM Bedienungsanleitung

Yealink

Yealink Yealink SIP-T42G Bedienungsanleitung

Yealink

Yealink Telkom W52P Bedienungsanleitung

Yealink

Yealink Yealink SIP-T22P Bedienungsanleitung

Yealink

Yealink SIP-T19 E2 T4 Series Bedienungsanleitung

Yealink

Yealink SIP-T46S Bedienungsanleitung

Yealink

Yealink SIP-T57W Bedienungsanleitung

Yealink

Yealink CP920 Bedienungsanleitung

Yealink

Yealink SIP-T3xG Programmierhandbuch

Yealink

Yealink W70B DECT Bedienungsanleitung

Yealink

Yealink T53W Bedienungsanleitung

Yealink

Yealink Yealink SIP-T41P Bedienungsanleitung

Yealink

Yealink Yealink SIP-T20P Bedienungsanleitung

Yealink

Yealink T46S Skype for Business Bedienungsanleitung

Yealink

Yealink SIP-T4X Bedienungsanleitung

Yealink

Yealink T21-E2 Gebrauchsanweisung

Yealink

Yealink VP59 Teams Bedienungsanleitung

Yealink

Yealink SIP-T23G Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Yealink

Yealink SIP-T20 Bedienungsanleitung

Yealink

Yealink T58A Skype for Business Bedienungsanleitung

Yealink

Yealink W56H Bedienungsanleitung

Yealink

Yealink One Talk CP960 Bedienungsanleitung

Yealink

Yealink One Talk W78B Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Cisco

Cisco SPA-500 Series Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Cisco

Cisco 7962 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung

Nortel

Nortel i2050 Bedienungsanleitung

Fiberme

Fiberme FAP260 Series Bedienungsanleitung