Yealink W56H Bedienungsanleitung

www.yealink.com For W60B firmware 77.81.0.10 or later

For W56H firmware 61.81.0.30 or later

Quick Start Guide(V83.10)

English | Deutsch | Español | Français

DECT IP Phone

W60B & W56H

Table of Contents

English ..........................................1

Deutsch .....................................15

Español ......................................30

Français .....................................44

W60 Package Contents

W56H Handset W60B Base Station Base Stand USB Charger Cradle 2 Power Adapters

Ethernet Cable Belt Clip Rechargeable Battery Quick Start Guide Handset Protective Case

(Optional)

Note: Yealink W60 DECT IP phone consists of one W60B base station and one W56H

handset.

W56H Package Contents

W56H Handset USB Charger Cradle Belt Clip Power Adapter

Rechargeable Battery Quick Start Guide Handset Protective Case (Optional)

Note: We recommend that you use the accessories provided or approved by Yealink.

The use of unapproved third-party accessories may result in reduced performance.

1. Connect the base station power and the network using method a or

method b.

a. AC Power Option b. PoE (Power Over Ethernet) Option

Note

• If you choose Method a, use Yealink supplied power adapter (5V/600mA).

A third-party power adapter may damage the base station.

• If you choose Method b, you do not need to connect the power adapter.

Make sure the hub/switch is PoE-compliant.

2a. (Desktop Installation) Attach and remove the base stand.

Attach the Base Stand Remove the Base Stand

Align the snap-fits with the corresponding holes

and push forward, snapping them into the holes.

W60B Package Contents

W60B Base Station Base Stand Power Adapter Ethernet Cable Quick Start Guide

Assembling the DECT Phone

IEEE 802.3af compliant

PoE Hub/Switch

Remove the snap-fits from the

holes horizontally.

MAC

2b. (Wall-Mount Installation) Attach the base station.

3. Insert the battery into the handset.

4. Attach the Belt Clip.

5. (Optional) Mount the charger cradle to the wall.

36mm

MAC

59mm

MAC

6. Connect the charger cradle and charge the handset.

Note

• Use Yealink supplied power adapter (5V/600mA). A third-party power adapter

may damage the handset.

• Check the charging status on the top-right corner of the LCD screen.

Shortcuts

Shortcut keys help you quickly access the frequently used phone features. The following

escribes the default shortcut-keys behaviors:

Entering and Editing Data

• Press one or more times to switch among different input modes or enter “#”.

• Press to select the special characters or enter “*”.

• Press a digit key one or more times to enter the desired character or digit.

• Press the Del soft key to delete entered characters.

• Press the Save soft key to accept the change or to cancel.

Getting Started

Access the call history records.

Check the line status.

Access the intercom list, select one to place an

internal call.

Decrease the ringer volume.

Increase the ringer volume.

Access the directory list.

Handset Registration

You can register up to 8 handsets to one W60B base station. Each handset can be

registered to 4 different base stations.

When the handset LCD screen prompts “Unregistered!”, long press on the base

station till the registration LED indicator flashes. There are two methods to register a new

handset:

Easy Registration:

Press the Reg soft key on the handset to register quickly.

Normal Registration:

1. Press the OK soft key on the handset, and then select Register Handset.

2. Select the desired base station and then press the OK soft key. The handset begins

searching the base station.

3. Press the OK soft key after searching a base station successfully.

4. Enter the base station PIN (default: 0000), and then press the Done soft key to

complete registration.

To register to multiple base stations, press the OK to enter the main menu, and select

Settings->Registration->Register Handset, then repeat steps 2-4.

Note:

• If the handset is registered to the base station successfully, the handset LCD screen

prompts “Handset Subscribed” and “Base NO.”( the last 4 characters indicate the base

station’s MAC address).

• If the handset LCD screen prompts “Searching for Base”, check if your base station is

powered on or not.

Network Settings

You can configure the base station to obtain network settings in one of the following

ways:

DHCP

By default, the base station attempts to contact a DHCP server in your network to

obtain the valid network settings, e.g., IP address, subnet mask, gateway address and

DNS address.

Static

If the base station cannot contact a DHCP server for any reason, you need to configure

the IP address, subnet mask, gateway address, primary DNS address and secondary DNS

address for the base station manually.

To configure the network parameters for the base station manually:

1. Press the OK key to enter the main menu, and then select Settings->System

Settings ->Network (default PIN: 0000)->Basic.

2. Select the desired IP address mode from the IP Mode field.

3. Press to select the corresponding IP address mode.

4. Make the desired changes.

5. Press the Save soft key to accept the change.

Note:

• The IP DECT phone supports either or both IPv4 and IPv6 addresses modes, but IPv6

is disabled by default.

• Wrong network settings may result in inaccessibility of your DECT phone may affect

the network performance. Contact your system administrator for the network

parameters.

Turning Handset On/Off

To turn the handset on, do one of the following:

• Press , then the LCD screen lights up.

• Place the handset in the charger cradle. The handset will be turned on automatically.

To turn the handset off:

Long press to turn the handset off.

Locking/Unlocking Keypad

• Long press when the handset is idle to lock the keypad.

• Long press again to unlock the keypad.

Silent Mode

• Long press when the handset is idle to switch the silent mode to On.

• Long press again to switch the silent mode to Off.

Basic Operations

Handset Settings

Handset Name

To rename the handset:

1. Press the OK key to enter the main menu, and then select Settings->Handset Name.

2. Edit the value in the Rename field.

3. Press the Save soft key to accept the change.

Volume Adjustment

• Press or when the handset is idle or ringing to adjust the ringer volume.

• Press or during a call to adjust the receiver volume of speakerphone/earpiece/

headset.

Ring Tones

1. Press the OK key to enter the main menu, and then select Settings->Audio->Ring

Tones->Melodies.

2. Press or to highlight the Intercom Call option or the desired line.

3. Press or to select the desired ring tone.

4. Press the Save soft key to accept the change.

Local Directory

To add a contact:

1. Press the OK key to enter the main menu, and then select Directory.

2. Press the Options soft key, and then select New Contact.

3. Enter the desired value in the Name, Office, Mobile and Other field respectively.

4. Press the Save soft key to accept the change.

To edit a contact:

1. Press the OK key to enter the main menu, and then select Directory.

2. Press or to highlight the desired entry.

3. Press the Options soft key, and then select Edit.

4. Edit the desired value in the Name, Office, Mobile and Other field respectively.

5. Press the Save soft key to accept the change.

To delete a contact:

1. Press the OK key to enter the main menu, and then select Directory.

2. Press or to highlight the desired entry.

3. Press the Options soft key, and then select Delete to delete the selected entry.

To assign a speed dial number:

1. Press the OK key to enter the main menu, and then select Settings->Telephony->

Speed Dial.

2. Press or to highlight the desired digit key, and then press the Assign soft key.

3. Press or to highlight the desired entry, and then press the OK soft key.

If both the office number and mobile number are stored, press or to highlight

the desired number, and then press the OK soft key again.

Basic Call Features

Placing Calls

To place a call directly:

1. Do one of the following:

• Enter the desired number when the handset is idle.

• Press to enter the pre-dialing screen. Enter the desired number using the keypad.

If there are multiple lines assigned to your handset as outgoing lines, press the Line

soft key to select the desired line. If you do not select a line, the handset uses the

default outgoing line to dial out.

2. Press , or to dial out.

To place a call from the local directory:

1. Press when the handset is idle.

2. Highlight the desired entry, and then press or to dial out using the default line.

If multiple numbers for the contact are stored, press or to highlight the desired

number, and then press or again to dial out using the default line.

To place a call from the call history:

1. Press the History soft key when the handset is idle, and then select the desired call

history list.

2. Press or to highlight the desired entry, and then press or to dial out

using the default line.

Andere Handbücher für W56H

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Yealink IP-Telefon Handbücher

Yealink

Yealink Yealink SIP-T42G Bedienungsanleitung

Yealink

Yealink Yealink SIP-T20P Bedienungsanleitung

Yealink

Yealink Telkom W52P Bedienungsanleitung

Yealink

Yealink SIP-T4X Service-Handbuch

Yealink

Yealink SIP-T2 Series Bedienungsanleitung

Yealink

Yealink Telkom W52P Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Yealink

Yealink W73P Bedienungsanleitung

Yealink

Yealink SIP-T19(P) E2 Bedienungsanleitung

Yealink

Yealink W59R Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung

Yealink

Yealink T18P Bedienungsanleitung

Yealink

Yealink SIP-T2XP Bedienungsanleitung

Yealink

Yealink Yealink SIP-T26P Bedienungsanleitung

Yealink

Yealink T54 Bedienungsanleitung

Yealink

Yealink Yealink SIP-T22P Bedienungsanleitung

Yealink

Yealink Yealink SIP-T42G Gebrauchsanweisung

Yealink

Yealink SIP-T4X Service-Handbuch

Yealink

Yealink SIP-T28 Bedienungsanleitung

Yealink

Yealink T58A Teams Bedienungsanleitung

Yealink

Yealink SIP VP-T49G Bedienungsanleitung

Yealink

Yealink Yealink SIP-T41P Bedienungsanleitung

Yealink

Yealink SIP-T33G Anwendungshandbuch

Yealink

Yealink T48G Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Cisco

Cisco SPA-500 Series Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Cisco

Cisco 7962 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung

Nortel

Nortel i2050 Bedienungsanleitung

Fiberme

Fiberme FAP260 Series Bedienungsanleitung