Yealink Yealink SIP-T42G Bedienungsanleitung

Ultra-elgant Gigabit IP Phone

User Guide

Placing Calls

You can place a call in three ways using your SIP-T42G IP phone:

•Using the handset

•Using the speakerphone

•Using the headset (not included in this manual)

You can also dial the number first, and then choose the way you want to speak to the

other party.

During a call, you can alternate between Speakerphone, Headset, or Handset mode by

pressing the Speakerphone key, the Headset key, or picking up the handset.

The call duration of active calls is visible on the LCD screen. In the figure below, the call

to the number”1007” has lasted 15 seconds.

To place a call using the handset:

1. Pick up the handset.

2. Enter the desired number using the keypad.

3. Press , , or the Send soft key.

The # key is configured as a send key by default. (This feature can be removed)

To place a call using the hands-free speakerphone mode:

Do one of the following:

•With the handset on-hook, press or the line key to obtain a dial tone.

Enter the desired number using the keypad.

Press , or the Send soft key.

•With the handset on-hook, enter the desired number using the keypad.

Press , , or the Send soft key.

Ending Calls:

Do one of the following:

- If you are using the handset, press the Cancel soft key or hang up the handset.

- If you are using the speakerphone, press or the Cancel soft key.

Answering Calls

When you are not in another call, you can answer a call in three ways:

•Using the handset

•Using the speakerphone

•Using the headset (not included in this manual)

Answering When Not in Another Call

Call duration and destination will always appear on the LCD screen for the active call.

To answer a call using the handset:

•Pick up the handset.

To answer a call using the hands-free speakerphone mode:

Do one of the following:

-Press .

- With the handset on-hook press the Answer soft key.

- With the handset on-hook press the line key. (The line key LED flashes green)

Answering When in Another Call

If you have an active call, and an incoming call arrives on the phone, do one of the

following:

1. Press the Answer soft key. (recommended method)

- The incoming call is answered and the original call is placed on hold.

2. Press to access the new call then press or the Answer soft key.

- The incoming call is answered and the original call is placed on hold.

Call Transfer

You can transfer a call in the following ways:

Blind Transfer: (This transfers the call without informing the second party of the caller)

1. Press the TRAN soft key during an active call. The call is placed on hold.

2. Press the number you want to transfer to.

3. Press TRAN soft key.

Attended Transfer: (Allows the second party to find out who is on the line and allow or deny the call)

1. Press the TRAN soft key during an active call. Th call is placed on hold.

2. Enter the number you want to transfer to, and press .

3. Press the TRAN soft key when the second party answers and allows the call.

a. If the second party denies the call or doesn’t answer, press the Cancel soft key and then

Resume to let the caller know they are unavailable, etc., and offer to take a message, transfer to

the second party’s voicemail, etc.

Transfer a Call to Voicemail:

1. Press the TRAN soft key during an active call. The call is placed on hold.

2. Dial *125 or the VM TRANS button and the extension number you are transferring the call for

voicemail to. (VM TRANS not programmed on all phones.)

4. Hang up. Call has now been transferred straight to that extensions voicemail.

Conference Call

1. Press Conf soft key during an active call. The call is placed on hold.

2. Enter the number of the second party, and then press the Send soft key.

3. Press the Conf soft key again when the second party answers. All parties are now joined in the

conference.

4. Press the EndCall soft key to disconnect all parties.

**Note: You can split the conference call into two individual calls by pressing the Split soft key.

Redialing Numbers

To redial the last dialed number from your phone:

•Press twice.

- A call to your last dialed number is attempted.

To redial a previously dialed number from your phone:

1. Press when the phone is idle.

2. Press ↑ or ↓ to select the desired entry from the placed calls list, and then

press or the Send soft key.

Call Mute

You can mute the microphone of the active audio device during an active call, and then

the other party cannot hear you.

To mute a call:

•Press during an active call.

- The mute key LED illuminates solid red.

- The LCD screen indicates that the call is on mute.

To un-mute a call:

•Press again to un-mute the call.

- The mute key LED goes out.

Call Hold & Resume

You can place an active call on hold. Only one active call can be in progress at any time.

Other calls can be made and received while placing the original call on hold. When you

place a call on hold, your IP PBX may play music on hold to the other party while

waiting.

To place a call on hold:

•Press the Hold soft key during a call.

- The line key LED flashes green. The LCD screen indicates that the call is on hold.

**Note: The phone will beep softly every 30 seconds to remind you that you still have a call on

hold.

To resume a held call:

•Press the Resume soft key.

Multiple Calls on Hold:

If multiple calls are placed on hold, do one of the following:

- Press ↑ or ↓ to switch between the calls, and then press the Resume soft key

to retrieve the desired call.

- Press the corresponding line key to retrieve the call.

**Note: If more than one call is placed on hold, a numbered prompt appears on the LCD screen,

for example, "2/3", indicating that this is the second call out of three calls.

Call Park

You can use call park to place a call on hold, and then retrieve the call from another

phone in the system (for example, a phone in another office or conference room). You

can park an active call by pressing the call park key on the phone. If the call is parked

successfully, the response is either a voice prompt confirming that the call was parked,

or a visible prompt on the LCD screen.

To use call park:

1. Press Park soft key during an active call. This places the call on hold.

2. Parked call can now be picked up at any available phone by dialing the assigned park number (701,

702, …).

**Note:

1. The parked call can be announced over an intercom/paging system

2. If the parked call is not retrieved within a period of time assigned by the system, the

phone performing call park feature will receive call back.

Intercom Another Extension

1. Press the INTERCOM soft key and the extension number when the phone is idle.

2. Call will be connected.

3. Press the INTERCOM or Cancel soft key to end the intercom call.

**Note: You can also just dial the party’s extension number you wish to reach and push .

Voicemail

Voicemail Setup:

1. Press the soft key.

2. You will be prompted to enter your pin –default pin is 1234.

3. Press 0 for Mailbox options

Mailbox Options:

1. Record unavailable message *

2. Record busy message *

3. Record name *

4. Manage temporary greeting

5. Change password **

*Note: You should record options 1, 2, and 3, but don’t worry about 4.

**Note: Change your password once the voicemail is setup.

To listen to voice messages:

1. Press soft key.

2. Follow the voice prompts to listen to your messages.

Caller ID / Call History

To view the call history:

1. Press the History soft key. The LCD screen displays all call records.

2. Press ↑ or ↓ to switch between all, placed, received, missed and forwarded call lists.

3. Press ↑ or ↓ to select the desired entry.

4. Press the Option soft key, and then select Detail from the prompt list. The detailed information of the

entry appears on the LCD screen.

To place a call from the call history list:

1. Press the History soft key.

2. Press ↑ or ↓ to switch between all, placed, received, missed and forwarded call lists.

3. Press ↑ or ↓ to select the desired entry.

4. Press the Send soft key

Andere Handbücher für Yealink SIP-T42G

Inhaltsverzeichnis

Andere Yealink IP-Telefon Handbücher

Yealink

Yealink Yealink SIP-T20P Bedienungsanleitung

Yealink

Yealink CP960 Teams Edition Bedienungsanleitung

Yealink

Yealink VP59 Teams Service-Handbuch

Yealink

Yealink Yealink SIP-T22P Bedienungsanleitung

Yealink

Yealink T46G Skype For Business Edition Bedienungsanleitung

Yealink

Yealink SIP-T19P Bedienungsanleitung

Yealink

Yealink SIP-T54W Bedienungsanleitung

Yealink

Yealink Yealink SIP-T22P Bedienungsanleitung

Yealink

Yealink Verizon One Talk W60B Bedienungsanleitung

Yealink

Yealink SIP-T57W Handbuch

Yealink

Yealink IP Phone & Starface PBX Bedienungsanleitung

Yealink

Yealink T42 Bedienungsanleitung

Yealink

Yealink SIP-T58V Bedienungsanleitung

Yealink

Yealink T18P Bedienungsanleitung

Yealink

Yealink MP54 Bedienungsanleitung

Yealink

Yealink Yealink SIP-T48G Bedienungsanleitung

Yealink

Yealink Yealink SIP-T20P Bedienungsanleitung

Yealink

Yealink MP56 Bedienungsanleitung

Yealink

Yealink SIP-T21 E2 Bedienungsanleitung

Yealink

Yealink SIP-T40P Bedienungsanleitung

Yealink

Yealink SIP-T32G Gebrauchsanweisung

Yealink

Yealink SIP-T29G Bedienungsanleitung

Yealink

Yealink T43U Bedienungsanleitung

Yealink

Yealink Yealink SIP-T42G Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Cisco

Cisco SPA-500 Series Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Cisco

Cisco 7962 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung

Nortel

Nortel i2050 Bedienungsanleitung

Fiberme

Fiberme FAP260 Series Bedienungsanleitung