Yealink T33G Bedienungsanleitung
T33G
Package Contents
Phone
Handset
2. Connect the handset and optional headset
1. Attach the stand and adjust the angle of the screen
Handset
Cord
Ethernet Cable
(2m CAT5E FTP
Cable)
The following items are included in your package.
Stand
Note: The IP phone should be used with Yealink original power adapter (5V/2A)only. The use of the third-party
power adapter may cause the damage to the phone. If you are connecting a PC to your phone, we recommend
that you use the Ethernet cable provided by Yealink. If inline power (PoE) is provided, you don’t need to connect
the power adapter. Make sure the hub/switch is PoE-compliant.
After the phone is connected to the network and supplied with power, it
automatically begins the initialization process. After startup, the phone is
ready for use.
3. Connect the network and power
You have two options for network and power connections. NetCarrier will advise you which one to
use.
Initializing... Please wait
Welcome
Starting the Phone
Ending a Call
Using the handset:
Hang up the handset or press End Call.
Using the speakerphone:
Press or End Call.
Using the headset:
Press End Call.
Redialing a Call
•Press to enter the Placed Calls list, select the desired entry, and press or the soft key.
•Press twice when the phone is idle to dial out the last dialed number.
Muting and Un-muting a Call
•Press to mute the microphone during a call.
•Press again to un-mute the call.
Answering a Call
Using the handset:
Pick up the handset.
Using the speakerphone:
Press
Using the headset:
Press
Placing a Call
Using the handset:
1. Pick up the handset.
2. Enter the number, and then press
Using the speakerphone:
1. With the handset on-hook, press .
2. Enter the number, and then press
Using the headset:
1. With the headset connected, press to activate the headset mode
2. Enter the number, and then press Send
Note: During a call, you can alternate between the headset, hands-free speakerphone and handset modes by
pressing the HEADSET key, the SPEAKERPHONE key or by picking up the handset. Headset mode
requires a connected headset.
Note: You can reject an incoming call by pressing Reject
Send.
Send.
Using Basic Call Functions
Send
Press the Hold soft key during an active call.
To Resume the call, do one of the following:
•If there is only one call on hold, press the Resume soft key.
•For more than one call on hold, select the desired call, and press the Resume soft key.
Transferring a Call
You can transfer a call in the following ways:
Performing a Blind Transfer
1.Press the Trans soft key during an active call.
2. Enter the number you want to transfer to.
3.Press the B Trans soft key.
Performing a Semi-Attended Transfer
1.Press the Trans soft key during an active call.
2. Enter the number you want to transfer to, and then press the Send soft key.
3.Press the Trans soft key when you hear the ring-back tone.
Performing a Attended Transfer
1.Press the Trans soft key during an active call.
2. Enter the number you want to transfer to, and then press the Send soft key.
3.Press the Trans soft key when the second party answers.
Initiating a Conference Call
1. Press the Conf soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press the Send soft key.
3. Press the Conf soft key again when the second party answers. All three parties are now joined in the
conference.
Listening to Voice Mails
Message waiting indicator on the idle screen indicates that one or more voicemail messages are waiting at the
message center. The power indicator LED slowly flashes red.
To listen to voice mails:
1.Press or the Connect soft key.
2. Follow the voice prompts to listen to your voicemail messages.
Note: You can split the conference call into two individual calls by pressing Split
To use the speed dial key:
Press the speed dial key to dial out the preset number.
Holding and Resuming a Call
To Hold a call:
Managing Call History
1. Press the History soft key when the phone is idle.
2.Press or to select an entry from the list.
3. Do the following:
• Press Send to call the entry.
• Press Delete to delete the entry from the list.
• Press Option, you can do the following:
• Select Detail to view detailed information about the entry.
• Select Add to Contacts to add the entry to the local directory.
• Select Add to Blacklist to add the entry to the blacklist.
• Select Delete All to delete all entries from the list.
Adjusting the Volume
Press to adjust the volume.
Customizing Your Phone
Andere Handbücher für T33G
8
Inhaltsverzeichnis
Andere Yealink Telefon Handbücher
Yealink
Yealink SIP-T58A Bedienungsanleitung
Yealink
Yealink T46 Gebrauchsanweisung
Yealink
Yealink SIP-T54W Bedienungsanleitung
Yealink
Yealink SIP-T33G Bedienungsanleitung
Yealink
Yealink CP700 Bedienungsanleitung
Yealink
Yealink T33 Gebrauchsanweisung
Yealink
Yealink Telkom W52P Bedienungsanleitung
Yealink
Yealink T41 Bedienungsanleitung
Yealink
Yealink MP56 Bedienungsanleitung
Yealink
Yealink T46S Skype for Business Bedienungsanleitung
Yealink
Yealink SIP-T48U Bedienungsanleitung
Yealink
Yealink CAM50 Bedienungsanleitung
Yealink
Yealink T21 Bedienungsanleitung
Yealink
Yealink T48S Skype For Business Edition Bedienungsanleitung
Yealink
Yealink Telkom W52P Bedienungsanleitung
Yealink
Yealink T19P Bedienungsanleitung
Yealink
Yealink SIP-W52P Bedienungsanleitung
Yealink
Yealink VP59 Teams Bedienungsanleitung
Yealink
Yealink SIP-T46U Bedienungsanleitung
Yealink
Yealink T46S Skype for Business Bedienungsanleitung
