"OK" button again to save and exit the editing state.
Open as the starting point and end point exchange, the default is off
Open as the starting point and end point exchange, the default is off
Open channel for exchanging XY axes (including fine tuning), default is off
Open for the optocoupler to determine the out of step and automatically
correct the position, off as not correct
Hold: continue running according to the original state. Clear: the motor
returns to the position and stops running.
Open as a color wheel linear change, off as a color wheel nonlinear
change, half color change
Press "OK" to see the confirmation dialog, press "OK" again to restore the
default value.
5. Installation requirement
1. The product shall be free from corrosive vapors and gases in the operating environment
and shall not contain inflammable and explosive articles.
2. Keep the distance between the light outlet direction and the subject at least more than 3 meters.
3.The direction of the light is an optical lens. No external force can hit the glass in the process of
operation. If the lens is damaged, it can only be used after the professional technician replacing
the lens of the same specifications .
4. When the outer cover of the power cord is damaged, it must be replaced with a new power cord
of the same specification by relevant professional personnel before use.
5.When the product is hung and installed, the load bearing of the hanging device shall be at least 3
times greater than the weight of the product, and the safety rope shall be fastened on the auxiliary
hanging device of the lamp, and the load bearing of the safety rope shall be more than 3 times
greater than the weight of the product.
6. The lens and light source of this product must be fully used together. When any part is
damaged, it shall be replaced by relevant professional personnel before it can be used again.
7. In the operating environment, it must be determined that the current voltage provided is within
the range required by this
specification well grounded.
The company reserves the right to amend this product manual without prior notice.
