YIHUA 929d5 Technisches Handbuch

O P E R AT I O N

INSTRUCTION

MadeinChina

Thank you for purchasing this product. Please

read the manual carefully before operating &

keep this manual for future reference.

The company reserves the right to improve &

upgrade products, product specifications &

design are subject to change without notice.

STATEMENT:

This product should not be thrown in the garbage. In accordance with the

European directive 2012/19/EU, electronic equipment at the end of their life

must be collected & returned to an authorized recycling facility. Este producto

no debe desecharse en la basura. De acuerdo a la directiva europea 2012/19/EU,

los equipos electrónicos al final de su vida se deberàn recoger y trasladar

a una planta de reciclaje autorizada.   Dieses Produkt sollte nicht mit dem

Hausmüll entsorgt werden. In Übereinstimmung mit der europäischen Richtlinie

2012/19/EU müssen elektronische Geräte am Ende ihrer Lebensdauer

eingesammelt und einem autorisierten Recyclingbetrieb zugeführt werden.

English

SPECIFICATION

01 02 03 04

04.07.03.370 929d5

PORTABLEDESOLDERINGIRON

Controlunitdimensions

Operatingambienttemperature

Nozzlediameter

L265xW35xH27mm±5mm

0℃〜40℃/32℉〜104℉

Φ1.2mm

I. APPLICATIONS

II. PART LIST

Thisunitissuitablefordesoldering&specializeddesolderingapplicationsonthrough-hole

componentsandotheroperation.Thisisespeciallysuitablefordesolderingthrough-hole

componentswithmultiplepins(forexample:LCDscreens,nixietubes,integratedcircuits/

microchips,socketpinsandmore).

1. Desoldering Nozzle (Consumable Part)

2. Tin Storage Tube

3. Desoldering Button

4. Piston Rod

5. Power Cord

6. Heating Indicator

7. Locking Screw (Heating Element)

1234

1. Connect the desoldering iron’s power cord to

an electrical outlet, and the heating element

will begin heating up.

2. Allow the desoldering iron to preheat for appr-

oximately 3 to 5 minutes, then, push down the

piston rod.

3. Cover the component's pin with the desolderi-

ng nozzle, and melt the solder joint complete-

ly. Then, press the desoldering button to extr-

act the solder completely.

4. When the operation is complete, DISCONNECT

the power cord.

NOTE: When using the desoldering nozzle for the

first time, coat the nozzle with a new layer of

solder(we recommend using rosin core solder) to

prevent oxidization.

III. OPERATION

IV. MAINTENANCE & PRECAUTIONS

CAUTION:

A. Melt the solder completely before pressing the de-

soldering button.

B. If there are solder remains inside the PCB’s hole, r-

esolder. Then, repeat the desoldering procedures.

C. If the component’s pin is stuck on the sidewall ins-

ide the hole, and you are unable to extract the sol-

der completely. Add solder to resolder, then, use

the desoldering nozzle to melt the solder joint co-

mpletely. Move the nozzle back-and-forth, and get

the component’s pins moving together with the n-

ozzle. When the component’s pinsare no longer in

contact with the sidewall of the hole, press the de-

soldering button to extract the solder completely.

D. Clean the tin storage tube regularly to prevent in-

effective desoldering caused by the over accumul-

ation of scrap solder.

1. If a layer of oxidization forms on the surface of

the desoldering nozzle, a misconception can be

A. Allow the heating element to heat up for appr-

oximately 3 minutes, then, rub gentlythe deso-

ldering nozzle inside the brass wool.

B. When the oxidation is partially removed, cont-

inue applying solder onto the desoldering noz-

zle while rubbing it until the nozzle is complet-

ely coated with solder. If the nozzle is too sev-

erely oxidized beyond cleaning, replace it with

a new one.

2. DO NOT use metal files to remove the oxidation

on the desoldering nozzle. If the nozzle deforms

or rusts, replace the desoldering nozzle with a

new nozzle.

3. DO NOT apply excessive force on the desolderi-

ng nozzle when operating. Doing this will NOT

IMPROVE the heat transfer but damage the de-

soldering nozzle instead.

4. After every operation, clean the desoldering no-

zzle, then tin the nozzle with a new layer of sol-

der to prevent oxidization.

5. Nozzle Cleaning

Allow the heating element to heat up for appro-

ximately 3 minutes, then, use the cleaning pin

to clean the nozzle.

desolderingiron's power cord to an electrical

outlet, allow the iron to heat up for approxima-

tely 3 minutes, then use the nozzle cleaning pi-

ns to clean the inner hole of the heating eleme-

nt.

It’s a must to melt all the solder inside the inner

hole before cleaning. Replace the heating elem-

ent if the cleaning pin CANNOT be put through

the inner hole.

7. Storage Tube Cleaning

Turn OFF the power, and wait until the storage

tube has cooled completely before cleaning the

storage tube.

V. TROUBLESHOOTING GUIDE

The heating indicator turns ON but the heating el-

ement is not heating up – This is an indication that

the heating element is faulty. To resolve this, you

need to replace the heating element.

2. Separate the storage tube and clean

the scrap solder out

1. Lift up and pull out the storage tube

created that the nozzle cannot heat up proper-

ly to melt the solder and do the tinning. Howe-

ver, the actual temperatures of both the heati-

ng element and nozzle are high. In such an ins-

tance, please do not increase the temperature

value confusedly but use a metal wool ball to

remove the oxidization following the steps bel-

ow:

05 06 07

6. Heating Element Cleaning

Remove the nozzle, tin storage tube when the

heating element has cooled. Then, connect the

Dieses Handbuch passt für folgende Modelle

Andere YIHUA Elektrowerkzeuge Handbücher

YIHUA

YIHUA 947 I Bedienungsanleitung

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

Kemper

Kemper 1740PRO Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch