YOKOGAWA CA150 Bedienungsanleitung

User's

Manual

CA150

HANDY CAL

IM CA150E

2nd Edition: Apr. 2007

IM CA150E

CA150 HANDY CAL

IM3E-2006.2

Yokogawa Meters & Instruments Corporation

International Sales Dept.

Tachihi Bld. No.2, 6-1-3, Sakaecho, Tachikawa-shi,Tokyo 190-8586 Japan

Phone: 81-42-534-1413, Facsimile: 81-42-534-1426

YOKOGAWA CORPORATION OF AMERICA (U.S.A.)

Phone: 1-770-253-7000 Facsimile: 1-770-251-2088

YOKOGAWA EUROPE B. V. (THE NETHERLANDS)

Phone: 31-334-64-1611 Facsimile: 31-334-64-1610

YOKOGAWA ENGINEERING ASIA PTE. LTD. (SINGAPORE)

Phone: 65-6241-9933 Facsimile: 65-6241-2606

YOKOGAWA AMERICA DO SUL S. A. (BRAZIL)

Phone: 55-11-5681-2400 Facsimile: 55-11-5681-1274

YOKOGAWA MEASURING INSTRUMENTS KOREA CORPORATION (KOREA)

Phone: 82-2-551-0660 to -0664 Facsimile: 82-2-551-0665

YOKOGAWA AUSTRALIA PTY. LTD. (AUSTRALIA)

Phone: 61-2-9805-0699 Facsimile: 61-2-9888-1844

YOKOGAWA INDIA LTD. (INDIA)

Phone: 91-80-4158-6000 Facsimile: 91-80-2852-1441

YOKOGAWA SHANGHAI TRADING CO., LTD. (CHINA)

Phone: 86-21-6880-8107 Facsimile: 86-21-6880-4987

YOKOGAWA MIDDLE EAST E. C. (BAHRAIN)

Phone: 973-358100 Facsimile: 973-336100

LTD. YOKOGAWA ELECTRIC (RUSSIAN FEDERATION)

Phone: 7-095-737-7868 Facsimile: 7-095-737-7869

IM CA150E

Introduction

Thank you for purchasing the CA150 HANDY CAL. This User’s manual contains

useful information regarding the instrument's functions and operating

procedures, as well as precautions that should be observed during use. To

ensure proper use of the instrument, read the manual thoroughly before

operating it. After you have finished reading this manual, store it in the carrying

case for quick reference whenever a question arises.

Notes•The information contained in this manual is subject to change without notice.

Furthermore, the actual display items may differ slightly from the ones

appearing in this manual.

•Every effort has been made to ensure the information contained herein is

accurate. However, should any concerns, errors, or emissions come to your

attention, or if you have any comments, please contact us.

•Copying or reproduction of any or all of the content of this manual without

Yokogawa's permission is strictly prohibited.

•The warranty is included in this manual. Be sure to read the warranty to

ensure you understand the terms, and then store it in a safe place. (The

warranty cannot be reissued.)

Trademark Acknowledgments

●Company names and product names mentioned herein may be trademarks

or registered trademarks of their respective companies.

Revision Information

1st Edition: Octorver 2006

2nd Edition: April 2007

Disk No. CA150E

2nd Edition: Apr, 2007 (KP)

2IM CA150E

Checking the Contents of the

Package

After opening the package, check the following items before use. If the product

is not the one you ordered, any item is missing, or there is a visible defect,

contact the dealer from whom you purchased the instrument.

Main Unit

Check that the model name given on the name plate on the back panel of the

instrument matches the one on your order.

• Model

Model

CA150

• Serial No.

Should you need to contact the dealer from whom you purchased the

instrument, have your unit's serial number handy to give to the person.

Standard Accessories

The following standard accessories are supplied with the instrument. Make sure

that all items are present and undamaged.

Source lead cables

(98020) Measurement lead cables

(RD031) Carrying case

(93026) Fuse

(A1566EF)

Terminal adapter

(99022)

Ferrite core

(A1193MN) two

AA-size alkaline batteries (six) User’s Manual

(IM CA150E)

IM CA150E

Optional Accessories

The following optional accessories are available. Upon receiving these optional

accessories, make sure that all the items you ordered have been supplied and

are undamaged.

If you have any questions regarding optional accessories, or if you wish to place

an order, contact the dealer from whom you purchased the instrument.

Name Model Remarks

AC adapter 94010-D UL/CSA standard

94010-F VDE standard

94010-R SAA standard

94010-S BS standard

94010-H GB standard

NiMH battery 94015

RJ sensor B9108WA For reference junction compensation

Main body case 93027 With strap and accessories case

Accessories case B9108XA

OptionalSpare Parts

Name Model Remarks

Source lead cables 98020 Lead Cable for Source

Measurement lead cables RD031 Safety Test Lead

Carrying case 93026

Terminal adapter 99022 Used for temperature measurement

Fuse A1566EF Set of 10 fuses

AC adapter Accessories case RJ sensor

Checking the Contents of the Package

4IM CA150E

Safety Precautions

When operating the instrument, strictly observe the precautions in this manual

to ensure its correct and safe operation. If used other than as instructed in this

manual, Yokogawa Meters & Instruments Corporation is not liable for any

damage that may result.

The following safety symbols are used on the instrument and in the manual:

Danger! Handle with Care.

This symbol indicates that the operator must refer to an explanation in the

manual in order to avoid risk of injury or loss of life of personnel or damage

to the instrument.

This symbol indicates a direct current.

This symbol indicates a power source.

Warning

Indicates a hazard that may result in the loss of life or serious injury of the user

unless the described instruction is abided by.

Caution

Indicates a hazard that may result in an injury to the user and/or physical dam-

age to the product or other equipment unless the described instruction is abided

by.

Note

Indicates information that is essential for handling the instrument or should be

noted in order to familiarize yourself with the instrument's operating procedures

and/or functions.

Tip

Indicates additional information to complement the present topic.

IM CA150E

Be sure to comply with the following safety precautions. Failure to do so may

result in loss of life or injury to personnel from such hazards as electrical shock,

or damage to the instrument.

Warning

●Prohibition of Use in Gaseous Environments

Do not operate the instrument in the presence of inflammable and explosive

gases or vapors. Operating the instrument in such an environment is extremely

hazardous.

●Protection Feature Defects

Do not operate the instrument if a fuse or other protection feature is defective.

Before commencing operation, make sure that protection features are free from

defects.

●External Connections

When connecting the instrument to the object to be tested or an external con-

trol circuit, or if you need to touch any external circuit, turn off the power to the

circuit and make sure that no voltage is generated.

●Fuses

To prevent a fire, be sure to use fuses with the specified ratings (voltage, cur-

rent, and type). Do not short-circuit the fuse holder.

●Correct Use of Lead Cables

Be sure to correctly use the measurement lead cables (model: RD031) and source

lead cables (model: 98020) without mistaking them.

●Removing the Casing

Removing the casing and disassembling or modifying the instrument is strictly

prohibited. Some parts inside the instrument are extremely dangerous because

they use a high voltage. When the instrument needs an internal inspection or

calibration, contact Yokogawa Meters & Instruments Corporation or the dealer

from whom you purchased the instrument.

To use the AC adapter (optional) safely, be sure to comply with the following

precautions.

Warning

●Power Supply

Make sure that the rated power supply voltage of the instrument matches the

voltage of the power supply before turning on the power.

Safety Precautions

Toc-1

IM CA150E

Contents

Introduction .....................................................................................1

Checking the Contents of the Package........................................ 2

Safety Precautions..........................................................................4

1. Product Outline........................................................1-1

1.1 Product Outline .................................................................. 1-1

2. Names and Functions of Parts...............................2-1

3. Before Starting Source or Measurement...............3-1

3.1 Usage Precautions............................................................. 3-1

3.2 Connecting a Power Supply ............................................. 3-3

3.2.1 Using Alkaline Batteries .............................................3-3

3.2.2 Using an AC Adapter .................................................3-4

3.2.3 Using an NiMH Battery Pack .....................................3-5

3.2.4 Fuse...........................................................................3-8

3.3 Turning the Power On and Off .......................................... 3-9

3.3.1 Turning the Power On and Off................................... 3-9

3.3.2 Auto Power Off ..........................................................3-9

3.3.3 Turning the Backlight On and Off .............................. 3-9

3.4 Operating Environment ................................................... 3-10

4. Source ...................................................................4-1

4.1 Connecting the Source Terminals .................................... 4-2

4.2 Source DC Voltage (DCV) Signals .................................... 4-3

4.3 Source DC Current (DCA) Signals.................................... 4-4

4.3.1 Source DC Current Signals ....................................... 4-4

4.3.2 4-20 mA Function ......................................................4-5

4.3.3 20 mA SINK Function ................................................ 4-6

4.4 Source Resistance (⍀) Signals......................................... 4-8

4.5 Source Thermocouple (TC) Signals ............................... 4-10

4.5.1 Source Thermocouple (TC) Signals ........................ 4-10

4.5.2 Using an External RJ Sensor .................................. 4-11

4.5.3 Using the Built-in RJ Sensor....................................4-12

4.6 Source Resistance Temperature Detector (RTD)

Signals .............................................................................. 4-13

Toc-2 IM CA150E

4.7 Source Frequency and Pulse (PULSE) Signals............. 4-15

4.7.1 Source a Continuous Pulse Train ............................ 4-16

4.7.2 Source a Pulse Cycle .............................................. 4-17

4.8 Divided Output (n/m) Function ....................................... 4-18

4.9 Sweep Output Functions................................................. 4-19

4.9.1 Step Sweep Function ..............................................4-20

4.9.2 Linear Sweep Function............................................ 4-22

4.9.3 Program Sweep Function ........................................4-24

4.10 Temperature Monitor Function ....................................... 4-26

5. Measurement ...........................................................5-1

5.1 Connecting the MeasurementTerminals ......................... 5-2

5.2 Measuring DC Voltage (DCV) ............................................ 5-4

5.3 Measuring DC Current (DCA)............................................ 5-4

5.3.1 Measuring DC Current...............................................5-4

5.3.2 Measuring 24V LOOP ...............................................5-5

5.4 Measuring Thermocouple (TC) ......................................... 5-6

5.5 Measuring Resistance (⍀) ................................................. 5-7

5.6 Measuring ResistanceTemperature Detector (RTD) ...... 5-8

5.7 Measuring Frequency (FREQ) and Pulse ........................ 5-9

5.7.1 Measuring Frequency (FREQ) and Pulse .................5-9

5.7.2 Measuring Contact Input .........................................5-10

6. Memory Function.....................................................6-1

6.1 Data Memory Items ............................................................ 6-2

6.1.1 Saving........................................................................6-3

6.1.2 Replacing and Saving................................................6-3

6.1.3 Clearing Memory ....................................................... 6-4

6.1.4 Displaying (Confirming) Saved Data .........................6-5

6.2 Setting Memory Items........................................................ 6-6

6.2.1 Saving........................................................................6-6

6.2.2 Replacing and Saving................................................6-6

6.2.3 Clearing Memory ....................................................... 6-7

6.2.4 Loading......................................................................6-8

7. Setting Mode ............................................................7-1

7.1 Source................................................................................. 7-2

7.2 Measure .............................................................................. 7-3

7.3 Configuration ..................................................................... 7-4

Contents

Toc-3

IM CA150E

8. Communication Function .......................................8-1

8.1 Cable Connection and Interface Specifications.............. 8-1

8.2 Communication Command List........................................ 8-2

8.3 Detailed Description of Commands ................................. 8-3

8.4 Error Code List................................................................. 8-12

8.5 Table of Valid Communication Commands ................... 8-13

8.6 Status Byte Format .......................................................... 8-15

8.7 Output Format of Printer Mode....................................... 8-16

9. Calibration Mode .....................................................9-1

9.1 Calibration of Source Functions ...................................... 9-2

9.2 Calibration of Measurement Functions ........................... 9-5

9.3 Verification after Calibration ............................................. 9-8

9.4 Calibration ofTemperature Ranges ................................. 9-8

10.Troubleshooting.....................................................10-1

10.1 Troubleshooting Checklist .............................................. 10-1

10.2 Disposing the Product..................................................... 10-2

11.Specifications ........................................................11-1

Appendix 1 Using a Cold Junction

Compensator....................................App.1-1

Appendix 2 Block Diagram..................................App.2-1

Appendix 3 Installing Ferrite Core......................App.3-1

Contents

1-1

IM CA150E

Product Outline

1. Product Outline

1.1 Product Outline

Generation (SOURCE)

Function Range

DC Voltage (DCV) 100 mV, 1 V, 10 V, 30 V

DC Current (DCA) 20 mA, 20 mA SINK, 4-20 mA

Resistance ()500 , 5 k, 50 k

Thermocouple (TC) K, E, J, T, N, L, U, R, S, B

Resistance temperature detector (RTD) Pt100, JPt100

Frequency and pulse (PULSE) CPM, 100 Hz, 1000 Hz, 10 kHz,

50 kHz

Measurement (MEASURE)

Function Range

DC Voltage (DCV) 35 V, 5 V, 500 mV

DC Current (DCA) 100 mA, 20 mA

Resistance ()50 k, 5 k, 500 

Thermocouple (TC) K, E, J, T, N, L, U, R, S, B

Resistance temperature detector (RTD) Pt100, JPt100

Frequency and pulse (FREQ) 100 Hz, 1000 Hz, 10 kHz, CPM, CPH

24V LOOP (DCA)

OtherDivided output (n/m) function

Sweep output functions

Step sweep function

Linear sweep function

Program sweep function

Temperature monitor function

Averaging (measurement)

Andere Handbücher für CA150

Inhaltsverzeichnis

Andere YOKOGAWA Prüfgeräte Handbücher

YOKOGAWA

YOKOGAWA CA320 Bedienungsanleitung

YOKOGAWA

YOKOGAWA AQ1300 Series Bedienungsanleitung

YOKOGAWA

YOKOGAWA AQ1301 Bedienungsanleitung

YOKOGAWA

YOKOGAWA DL7440 Bedienungsanleitung

YOKOGAWA

YOKOGAWA DLM2000 Series Bedienungsanleitung

YOKOGAWA

YOKOGAWA MY40 Bedienungsanleitung

YOKOGAWA

YOKOGAWA DLM2000 Series Bedienungsanleitung

YOKOGAWA

YOKOGAWA M1233SR Betriebsanleitung

YOKOGAWA

YOKOGAWA 30031A Bedienungsanleitung

YOKOGAWA

YOKOGAWA DL1620 Bedienungsanleitung

YOKOGAWA

YOKOGAWA CA700 Bedienungsanleitung

YOKOGAWA

YOKOGAWA ScopeCorder DL350 Bedienungsanleitung

YOKOGAWA

YOKOGAWA 90020B Bedienungsanleitung

YOKOGAWA

YOKOGAWA DL9000 Series Bedienungsanleitung

YOKOGAWA

YOKOGAWA CA330 Bedienungsanleitung

YOKOGAWA

YOKOGAWA 240413 Bedienungsanleitung

YOKOGAWA

YOKOGAWA 701921 Bedienungsanleitung

YOKOGAWA

YOKOGAWA DL7200 Bedienungsanleitung

YOKOGAWA

YOKOGAWA CA150 Bedienungsanleitung

YOKOGAWA

YOKOGAWA MY40 Bedienungsanleitung

YOKOGAWA

YOKOGAWA DL7440 Bedienungsanleitung

YOKOGAWA

YOKOGAWA AQ1100A Bedienungsanleitung

YOKOGAWA

YOKOGAWA US300FM Bedienungsanleitung

YOKOGAWA

YOKOGAWA 30032A Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung