Yongnuo RF605C Bedienungsanleitung

Wireless Flash Trigger

User Manual

RF605Ｃ

Thank you for purchasing YONGNUO products in

advance.

Please be sure to read and understand this user

manual and the usage of camera and flash before

using. This product is a wireless transceiver

i n tegrated d e s i g n , f o r t h e c o n venience o f

description, the product will named “transmitter ”

when mounted on the camera hot shoe,named

“receiver ”when mounted or connected to the

flash.

Contents

Off-Camera

Flash

Product Features .......................................................................1

Cautions................................................................................2

.........................................................4

Preparation before using...............................................................5

.....................................................6 7

...............................................................8

Function extend........................................................................9

Troubleshooting ......................................................................10

Specification..........................................................................11

Names of RF605 Parts..................................................................3

Button,display, indicator light

Wireless triggering and testing -

Shutter release function

On-Top

Flash

Receiver

Transmitter

Product Features

RF-602/RF-603 two communication modes RF605 = RF602 +RF603

TX/RX/TRX multiple working ways

A/B/C/D/E/F 6 groups (compatible with YN560-TX)

Wireless shutter remote control

Clear LCD screen display, shortcut key operation

16 channels

Communication range up to 100M

Package Contents:

RF605C or RF605N ......................X2

LS-2.5 shutter connecting cable* . . . . . . X2

User Manual .............................X1

*The shutter release cable type please

refer to the packing shown.

Optional component:

LS-PC series flash cable

LS-PC635 LS-PC PC/

Please purchase the additional shutter

release cable or PC cable if necessary.

Cautions

1. As this is an electronic product accessory, some of the environment causes

may affect the working. However this is hardly ever to get this situation,

don't worry.

2. Do not pull the wires and turn off the camera when connecting.

3. For a long time non-use, please turn the transceiver off and remove the

batteries.

4. Do not put it in high temperature, such as a closed car under direct sunlight,

the control panel and other high temperature areas.

5. Keep dry, do not use wet hands contact with the product, the product must

not be immersed in water or exposed to rain, and this may and this may lead

to not work properly.

6. Do not used in the flammable occasion in violation of this warning may cause

an explosion or fire.

7. Owing to this product include battery, please operate it strictly according to

related rules, otherwise maybe cause explosion, fire or physical injury.

8. Do not trigger the flash close to a person's eyes, it may impair the person's

vision.

RF605C is more

suitable for the

Canon cameras

Names of RF605 Parts

RF605N is more

suitable for the

Nikon cameras

A-Hot shoe stand/Hot shoe contacts: install flash

B-2.5mm shutter release socket

C-Focus light (Green)/shutter indicator light

(Red),in RF-603 TRX status, the AF-assist light

will blink once in every 2 seconds.

D-PC interface(output)

E-Waken indicator (Green)/trigger indicator light

(Red),in RF-602 RX , the trigger indicator

light will blink once in every 2 seconds.

F-Power switch: ON means turn on, while OFF

means turn off

G-Buttons and display (see below page)

H-Multifunction button (see below page)

I-Hot shoe fixed foot and contacts: mounted on

the camera hot shoe

J-Locking ring

K-Battery compartment

L-the battery compartment cover

status

Button,display,indicator light

Button

Function

Display/Indicator light

Communication

mode/Transmit-

receive status

button

Long press to switch the communication

mode RF-602/RF-603;Short press to switch

the transmit-receive status

RF-602 can use TX(transmit),RX(receive)

Status; RF-603 can use TX (transmit),

TRX(transmit-receive) status

Channel

Press to setup the channel (1-16)

Transmit

grouping button

Press the button to activate the transmit

grouping button setting, then press the

transmit-receive grouping button to turn on/off

the transmitting group

Transmit-receive

grouping button

Short press to turn on/off the A/B/C group, long

press to turn on/off D/E/F group, the

corresponding grouping indicator light on or off

【Multifunction

Button】

In TX status:half press to waken the speedlite,

full press the to test flash

waken/

trigger

focus/

shutter

A/D

B/E

C/F

Preparation before using

1.Battery Installation:

Slide to open the battery compartment, install two AAA

batteries(not included) for two transceivers according to the

"+/-"direction shown.

The low battery Indicator( )

The low battery indicator will blink when the batteries are low.

Please replace the battery.

2.Fix the transmitter on the hot shoe of the camera:

Mount the transmitter on the hot shoe of the camera through

the hot shoe mounting foot, then tight the locking screw.

Supports installing the flash on the transmitter (on-top

flash， as the picture shown).

3.Fixed the receiver and flash

Mount the receiver on the mini stand of the flash attached or

other fixed device (not included), and tight the locking screw.

Install the flash on the hot shoe of the receiver, lock the flash

and ensure all links are fixed well.

Make sure all the transceivers have been fixed, the flash set to manual “M”

mode.

RF605

1.Set the communication mode: Set all the transmitters and receivers to the same

communication mode (RF-602 or RF-603).

2.Set the transmit-receive status: Set the transmitter to TX, the receiver set to RX or

TRX.

3.Channel setting: Set all the transceivers in the same channel.

4.Set the groups of transmitter and receiver:

1)Transmitter settings: In TX status, press the grouping button for setup; in TRX

status, press the TX Group button or half press the camera shutter release button to

activate the transmit group settings.

2)Receiving group setting: Press the grouping button for settings.

Example: Use the RF605 and set the F group not flash

Wireless triggering and testing

Transmitter

Setting

Receiver

Setting

FUse the non specialized transmitter can also wireless trigger the flash (single

contact trigger).

Wireless triggering and testing

5.Waken the flash: half press the transmitter(TX status) multifunction button or

camera shutter to waken the flash.

6.Test and trigger the flash :Fully press the multifunction button of the transmitter

(TX status) to test the flash once. When fully pressing the release button of camera

shutter, it will wireless synchronously trigger the on-top flash and off-camera flash.

YN560-TX RF605

Example: use the YN560-TX and set C group not flash

Set the C group flash mode to “--” when using the YN560-TX ,the C group of

corresponding RF605 receiver does not flash.

Inhaltsverzeichnis

Andere Yongnuo Kamerazubehör Handbücher

Yongnuo

Yongnuo yn-622n-tx Bedienungsanleitung

Yongnuo

Yongnuo YN60RGB Bedienungsanleitung

Yongnuo

Yongnuo yn565ex II Bedienungsanleitung

Yongnuo

Yongnuo YNLUX200 Bedienungsanleitung

Yongnuo

Yongnuo YN200 Bedienungsanleitung

Yongnuo

Yongnuo RF-603 Bedienungsanleitung

Yongnuo

Yongnuo YNRAY200 Bedienungsanleitung

Yongnuo

Yongnuo TOYUG YN-622C Bedienungsanleitung

Yongnuo

Yongnuo YN565EXII Bedienungsanleitung

Yongnuo

Yongnuo yn565ex II Bedienungsanleitung

Yongnuo

Yongnuo YN650EX-RF Bedienungsanleitung

Yongnuo

Yongnuo YN-04II Bedienungsanleitung

Yongnuo

Yongnuo YN560-TX Bedienungsanleitung

Yongnuo

Yongnuo Speedlite YN468-II Bedienungsanleitung

Yongnuo

Yongnuo RF-603 II Bedienungsanleitung

Yongnuo

Yongnuo TOYUG YN-622C Bedienungsanleitung

Yongnuo

Yongnuo TOYUG YN-622C Bedienungsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken

Viltrox

Viltrox EF-NEX Montageanleitung

Calumet

Calumet 7100 Series CK7114 Bedienungsanleitung

Ropox

Ropox 4Single Series Bedienungsanleitung

Cambo

Cambo Wide DS Digital Series Betriebsanleitung

Samsung

Samsung SHG-120 Bedienungsanleitung

Ryobi

Ryobi BPL-1820 Bedienungsanleitung

Aegis

Aegis ABL-36020P Bedienungsanleitung

Pentax

Pentax Data Back Fc Bedienungsanleitung

Fantasea

Fantasea EyeGrabber F Series Bedienungsanleitung

Honeywell

Honeywell HDZ20HD Bedienungsanleitung

EGO

EGO BA1400T Bedienungsanleitung

Sima

Sima SRW-62 Bedienungsanleitung

Shape

Shape A7SSMKIT Bedienungsanleitung

Slide Kamera

Slide Kamera HST-2 Bedienungsanleitung

Power works

Power works 2902613 Bedienungsanleitung

SES

SES SE-2047-2 Bedienungsanleitung

Olympus

Olympus PT-EP05L Bedienungsanleitung

Starlite

Starlite OctoDome nxt Bedienungsanleitung