Yoshitake BLV-1S Bedienungsanleitung

EPDT-363

BALL VALVE BLV-1S

PRODUCT MANUAL .

Thank you very much for choosing the Yoshitake product. To ensure the correct and safe use of the product,

please read this manual before use. This manual shall be kept with care for future references.

The symbols used in this manual have the following meanings.

Warning

This symbol indicates a potentially hazardous situation that, if not avoided,

could result in death or serious injury.

Caution

This symbol indicates a hazardous situation that, if not avoided, may result in

minor or moderate injury or may result in only property damage.

1. Specification

Model

BLV-1S

Nominal size

8A-50A

Application

Steam,Air, Cold and hot water, Oil, Other non-dangerous fluids

Maximum pressure

According to pressure and temperature rating

Maximum temperature

Material

Body

Stainless steel

Ball

Stainless steel

Ball seat

PTFE

Connection

JIS Rc, NPT

Pressure and temperature rating

Caution

Please confirm that the indications on the product correspond with the specifications of the ordered

product model before use.

* If they are different, please contact us without using the product.

2. Storage / Installation / Operation

Warning

Before applying fluid, make sure that there is no danger if the fluid flow into the end of the piping.

*Failure to follow this notice may result in property damage due to fluid leakage.

Caution

(1) Store the product indoors in a dust free, low humidity, dry and ventilated environment.

(2) Installation should be conducted by suitably trained personnel, wearing protective head, eye, hand

and foot protection.

(3) The product can be used for “complete opening” and “complete closing”. If the product is used at

intermediate opening, ball and ball seat may be damaged.

(4) Be careful that the threaded connection between the mating pipe and the internal threaded

connections of the valves are in line to avoid piping stresses in the valves.

(5) During transportation or storage of the product leakage may occur from the packing due to

decreasing of tightening pressure by stress relaxation of the packing. Be sure to retighten the stem

nut before use.

(6) When connecting the product and the piping, apply seal agent (such as seal tape) to the screw part

of the piping. Use seal agent appropriate for temperature, fluid, etc.

(7) Slide the lock plate to operate the handle.

(8) To connect the product to piping, use appropriate tool such as spanner with spanner apply part near

the piping. In addition, do not make piping work with applying a pipe wrench to the product. If doing

so, it leads to malfunction of the product.

(9) There are no restrictions on the flow direction for the product.

3. Troubleshooting

Trouble

Cause

Remedy

Outside leakage

1. Tightening of the stem nut is

loosened.

1. Tighten the stem nut additionally.

2. The grand packing is damaged.

2. Replace the product with new one.

3. The stem is damaged.

3. Replace the product with new one.

Leakage from the

ball part on

complete closing

1. The ball and/or ball seat is

damaged.

1. Replace the product with new one.

2. Foreign substance is stuck.

2. Remove the foreign substance.

Operation torque of

the handle is

abnormally large

1. Too much tightening of the

washer of packing.

1. Loosen the stem nut and tighten it again

until leak stops.

2. Foreign substance is stuck on

spindle and screw part.

2. Remove the foreign substance.

Abnormal sound

1. Each screw part is loosened.

1. Retighten the loosened parts.

4. Maintenance

Warning

Completely discharge the pressure inside of the product, line and equipment before inspection and

maintenance. For high temperature fluid, cool down the product till it can be touched with bare hands.

* Failure to follow this notice may result in injury or burns due to residual pressure.

Periodic inspection

Please conduct periodic inspection about once a year in order to maintain optimal performance and

function of the product.

Inspection item

●Opening and closing operation

●Abnormal sound

●Outside leakage

If any abnormality is found, see “4. Troubleshooting” and conduct appropriate measure.

5. After service

1. Limited warranty

This product has been manufactured using highly-advanced techniques and subjected to strict quality control. Please be

sure to use the product in accordance with instructions on the manual and the label attached to it.

Yoshitake warrants the product to be free from any defects in material and workmanship under normal usage for a

period of one year from the date of receipt by the original user, but no longer than 24 months from the date of shipment

from Yoshitake’s factory.

2. Parts supply after product discontinuation

This product may be subject to discontinuation or change for improvement without any prior notice. After the

discontinuation of the product, Yoshitake supplies the repair parts for 5 years otherwise individually agreed.

3．This warranty does not cover the damage due to any of below:

(1) Valve seat leakage or malfunction caused by foreign substances inside piping.

(2) Improper handling or misuse.

(3) Improper supply conditions such as abnormal water pressure/quality.

(4) Water scale or freezing.

(5) Trouble with power/air supply.

(6) Any alteration made by other than Yoshitake.

(7) Use under severe conditions deviating from the design specifications (e.g. in case of corrosion due to outdoor use).

(8) Fire, flood, earthquake, thunder and other natural disasters.

(9) Consumable parts such as O-ring, gasket, diaphragm and etc.

Yoshitake is not liable for any damage or loss caused by malfunction or defect of the product.

4．On repair request after warranty is expired

In case that performance of the product can be maintained, we repair the product with charge on customer’s request.

INTERNATIONAL DEPT. 955-5, Miyamae, Irukadeshinden, Komaki,Aichi, 485-0084, Japan

Phone: +81-568-75-4432 Fax: +81-568-75-4763 E-mail: [email protected]

Inhaltsverzeichnis

Andere Yoshitake Steuereinheit Handbücher

Yoshitake

Yoshitake GD-46 Series Bedienungsanleitung

Yoshitake

Yoshitake GD-24 Bedienungsanleitung

Yoshitake

Yoshitake GPK-2001 Bedienungsanleitung

Yoshitake

Yoshitake GP-1200 Bedienungsanleitung

Yoshitake

Yoshitake TA-18ML Bedienungsanleitung

Yoshitake

Yoshitake TA-22ML Bedienungsanleitung

Yoshitake

Yoshitake CF-60 Bedienungsanleitung

Yoshitake

Yoshitake TA-2 Bedienungsanleitung

Yoshitake

Yoshitake GP-27 Bedienungsanleitung

Yoshitake

Yoshitake DP-100 Series Bedienungsanleitung

Yoshitake

Yoshitake SU-20H Bedienungsanleitung

Yoshitake

Yoshitake BSV-10F Bedienungsanleitung

Yoshitake

Yoshitake GLV-16 Bedienungsanleitung

Yoshitake

Yoshitake AL-150T Series Bedienungsanleitung

Yoshitake

Yoshitake BLV-2SF Bedienungsanleitung

Yoshitake

Yoshitake SCV-3 Bedienungsanleitung

Yoshitake

Yoshitake CT-1 Bedienungsanleitung

Yoshitake

Yoshitake PD-1 Bedienungsanleitung

Yoshitake

Yoshitake GP-1000 Bedienungsanleitung

Yoshitake

Yoshitake GDK-2000 Bedienungsanleitung

Yoshitake

Yoshitake AL-6 Bedienungsanleitung

Yoshitake

Yoshitake AF-7 Bedienungsanleitung

Yoshitake

Yoshitake SCV-4 Bedienungsanleitung

Yoshitake

Yoshitake DP-200 Series Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung