1. Plug the bottle into a power source using the USB connector to fully charge
the battery.
2. Add drinking water to the bottle.
3. Set the hydrogen generator to the desired timer setting. Do not shake while
the generator runs. Instead, let it sit during hydrogen generation.
4. After the cycle has finished, wait 10 minutes.
5. When using Plus oils with HydroGize, be sure to thoroughly clean the device
immediately following use to properly maintain the unit. Please note that
adding oils may decrease hydrogen production. For ease of maintenance,
move oil-enriched hydrogen water to a separate container if not consumed
immediately.
Q. Can I put essential oils directly into HydroGize?
A. Yes. However, when using Plus oils with HydroGize, be sure to thoroughly clean
the device immediately following use to properly maintain the unit. Please note that
adding oils may decrease hydrogen production. For ease of maintenance, move oil-
enriched hydrogen water to a separate container if not consumed immediately.
Q. Is HydroGize dishwasher safe?
A. No. The device cannot handle extreme heat. Always hand wash the device.
Q. What are the cleaning instructions for HydroGize?
1. Disassemble the water bottle into three parts to clean.
2. Gently clean with warm water, gentle dish soap, and a soft cloth. Do not use
abrasive or corrosive cleaners.
3. Let the device dry before charging.
Q. Can I use hot water while generating hydrogen?
A. Yes. The device will generate hydrogen in hot or cold water.
