Z-World PK2300 Bedienungsanleitung

Users Manual

Revision E

PK2300

C-Programmable Controller

PK2300 Users Manual

Part Number 019-0040



Revision E

Last revised on March 2, 2000  Printed in U.S.A.

Z-World reserves the right to make changes and improvements to its

products without providing notice.

Trademarks

 Dynamic C®is a registered trademark of Z-World, Inc.

 Windows® is a registered trademark of Microsoft Corporation

 PLCBusis a trademark of Z-World, Inc.

Notice to Users

When a system failure may cause serious consequences, protecting life and

property against such consequences with a backup system or safety device

is essential. The buyer agrees that protection against consequences

resulting from system failure is the buyers responsibility.

This device is not approved for life-support or medical systems.

All Z-World products are 100 percent functionally tested. Additional

testing may include visual quality control inspections or mechanical

defects analyzer inspections. Specifications are based on characterization

of tested sample units rather than testing over temperature and voltage of

each unit. Z-World may qualify components to operate within a range of

parameters that is different from the manufacturers recommended range.

This strategy is believed to be more economical and effective. Additional

testing or burn-in of an individual unit is available by special arrangement.

Company Address

Z-World, Inc.

2900 Spafford Street

Davis, California 95616-6800

USA

Telephone:

Facsimile:

Web Site:

E-Mail:

(530) 757-3737

(530) 753-5141

http://www.zworld.com

zworld@zworld.com

Table of Contents siiiPK2300

TABLE OF CONTENTS

About This Manual vii

Chapter 1: Overview 11

PK2300 Overview ...............................................................................12

Features ................................................................................................14

Flexibility and Customization ..............................................................15

Optional Accessories............................................................................ 15

Development Kit ............................................................................. 16

Software Development and Evaluation Tools ......................................16

CE Compliance .................................................................................... 16

Chapter 2: Getting Started 17

Connecting the PK2300 to Your PC .................................................... 18

Running Dynamic C............................................................................. 20

Selecting Communications Rate, Port, and Protocol ......................20

Running a Sample Program ................................................................. 22

Chapter 3: Input/Output Configuration 25

PK2300 Components ........................................................................... 26

Flexible Input/Output Summary........................................................... 27

Configuring Serial Communication ..................................................... 29

Configuring Inputs and Outputs ........................................................... 30

Selecting IN-08 and IN-09, or RMI Input + and - .......................... 30

Selecting IN-12 thru IN-16, or OUT-04 thru OUT-08 ....................31

Selecting IN-10 and IN-11 or RS-485+ and RS-485 .................... 33

CMOS Outputs ................................................................................ 34

Chapter 4: System Development 35

PK2300 Operating Modes ................................................................... 36

Changing the PK2300s Operating Mode ....................................... 37

Running a Program .............................................................................. 38

Using the Digital Inputs/Outputs ......................................................... 39

Protected Digital Inputs .................................................................. 39

How to Read the Inputs ................................................................ 40

High-Current Outputs...................................................................... 42

How to Use the Outputs ................................................................ 42

iv sTable of Contents PK2300

Resistance Measurement Input (RMI) ............................................ 45

How to Use the Resistance Measurement Input ........................... 46

RMI Theory of Operation ............................................................. 49

Serial Communication.......................................................................... 50

RS-232 Communication .................................................................. 50

RS-232 Connector Pinouts .............................................................. 50

RS-485 Communication Network ........................................................ 51

Termination and Bias Resistors ....................................................... 52

Additional Features .............................................................................. 54

PWM Outputs ................................................................................. 54

How to Use the PWM Feature ...................................................... 54

User-Programmable LEDs .............................................................. 58

Memory ........................................................................................... 58

Real-Time Clock (RTC) .................................................................. 59

Power Supervisor ............................................................................ 60

Resetting the Processor ................................................................... 61

PK2300 Subsystems ............................................................................ 62

Chapter 5: Software Reference 63

Supplied Software ................................................................................ 64

Digital Inputs/Outputs ..................................................................... 65

Level-Sensitive Interrupts ............................................................... 68

Interrupt Service Routines (ISR) ..................................................... 69

Resistance Measurement Input........................................................ 70

PWM Outputs ...................................................................................... 72

Additional Software Feature References ......................................... 74

Advanced Input/Output Programming ................................................. 75

Digital Input Addressing Detail ...................................................... 76

Digital Output Addressing Detail .................................................... 77

LED Addressing Detail ................................................................... 78

RS-485 Driver IC Addressing Detail .............................................. 78

Resistance Measurement Input Addressing Detail .......................... 79

PWM Addressing Detail ................................................................. 81

PWM Advanced Programming Functions ....................................... 86

Appendix A: Troubleshooting 89

Out of the Box...................................................................................... 90

Dynamic C Will Not Start .................................................................... 91

Dynamic C Loses Serial Link .............................................................. 91

PK2300 Repeatedly Resets .................................................................. 91

Common Programming Errors ............................................................. 91

Table of Contents svPK2300

Appendix B: Specifications 93

Electrical and Mechanical Specifications ............................................94

PK2300 External Dimensions ......................................................... 95

Factory Default Jumper Positions ........................................................ 96

Protected Digital Inputs ....................................................................... 98

Frequency Response for IN-01 to IN-05, and IN-08 to IN-16........98

Frequency Response for IN-06 and IN-07 ...................................... 99

Customization ................................................................................. 99

Frequency Response and Input Range ..........................................99

Default Pull-Up Assignments .....................................................100

High-Current Drivers ......................................................................... 100

Function of K .............................................................................101

Appendix C: Serial Interface Board 2 103

Introduction........................................................................................ 104

External Dimensions ..........................................................................105

Appendix D: Sinking vs. Sourcing Drivers 107

Selecting Sourcing or Sinking Drivers ............................................... 109

Sinking Driver (Low-Side Drive).................................................. 109

Sourcing Driver (High-Side Drive) ............................................... 110

Appendix E: Power Management 111

Power-Failure Detection Circuitry ..................................................... 112

Power Failure Sequence of Events ................................................ 112

Appendix F: Enclosure Mounting 115

Enclosure Mounting Considerations .................................................. 116

Mounting Controllers on DIN Rails .................................................. 118

Appendix G: Nonvolatile Storage 119

Appendix H: I/O Map and Interrupt Vectors 121

CM7200 Input/Output Map ............................................................... 122

Real-Time Clock Registers ................................................................124

Other Input/Output Addresses............................................................125

Interrupt Vectors ................................................................................126

Interrupt Priorities .............................................................................. 127

vi sTable of Contents PK2300

Appendix I: Battery 129

Storage Conditions and Shelf Life .....................................................130

Instructions for Replacing the Lithium Battery.................................. 130

Battery Cautions ................................................................................131

Index 133

Schematics

About This Manual sviiPK2300

ABOUT THIS MANUAL

This manual provides instructions for installing, testing, configuring, and

interconnecting the Z-World PK2300 controller.

Instructions to get started using Dynamic C®programming functions are

included. Complete C and Dynamic C®references and programming

resources are referenced when necessary.

Assumptions

Assumptions are made regarding the user's knowledge and experience in

the following areas:

 Ability to design and engineer the target system that a PK2300 will

control.

 Understanding of the basics of operating a software program and

editing files under Windows on a PC.

 Knowledge of the basics of C programming.

For a full treatment of C, refer to the following texts.

The C Programming Language by Kernighan and Ritchie

and/or

C: A Reference Manual by Harbison and Steel

 Knowledge of basic Z80 assembly language and architecture.

For documentation from Zilog, refer to the following texts.

Z180 MPU User's Manual

Z180 Serial Communication Controllers

Z80 Microprocessor Family User's Manual

PK2300viii sAbout This Manual

Acronyms

Table 1 lists and defines the acronyms that may be used in this manual.

Icons

Table 2 displays and defines icons that may be used in this manual.

Table 1. Acronyms

Acronym Meaning

EPROM Erasable Programmable Read-Only Memory

EEPROM Electronically Erasable Programmable Read-Only Memory

LCD Liquid Crystal Display

LED Light-Emitting Diode

NMI Nonmaskable Interrupt

PIO Parallel Input/Output Circuit

(Individually Programmable Input/Output)

PRT Programmable Reload Timer

RAM Random Access Memory

RTC Real-Time Clock

SIB Serial Interface Board

SRAM Static Random Access Memory

UART Universal Asynchronous Receiver Transmitter

Table 2. Icons

Icon Meaning Icon Meaning

Refer to or see !Note

(Please contact 7LS Tip

Caution

High Voltage

Factory Default

About This Manual sixPK2300

Conventions

Table 3 lists and defines the typographic conventions that may be used in

this manual.

Pin Number 1

A black square indicates

pin 1 of all headers.

Measurements

All diagram and graphic measurements are in inches followed by millime-

ters enclosed in parenthesis.

Table 3. Typographic Conventions

Example Description

while Courier font (bold) indicates a program, a fragment of a

program, or a Dynamic C keyword or phrase.

// IN-01… Program comments are written in Courier font, plain face.

Italics Indicates that something should be typed instead of the

italicized words (e.g., in place of filename, type a file’s

name).

Edit Sans serif font (bold) signifies a menu or menu selection.

. . . An ellipsis indicates that (1) irrelevant program text is

omitted for brevity or that (2) preceding program text may

be repeated indefinitely.

[ ] Brackets in a C function’s definition or program segment

indicate that the enclosed directive is optional.

< > Angle brackets occasionally enclose classes of terms.

a | b | c A vertical bar indicates that a choice should be made from

among the items listed.

Pin 1

PK2300xsAbout This Manual

Blank

Inhaltsverzeichnis

Andere Z-World Controller Handbücher

Z-World

Z-World PK2100 Series Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung