Zamel P-256/8 Bedienungsanleitung

* 1-channel transmitters do not cooperate with roller blind controllers.

CAUTION: The given range concerns open area - an ideal condi-

tion without any natural or articial obstacles. If there are some

obstacles between a transmitter and a receiver, it is advisable to

decrease the range according to: wood and plaster: from 5 to 20 %,

bricks: from 10 to 40 %, reinforced concrete: from 40 to 80 %, metal:

from 90 to 100%, glass: from 10 to 20 %, Over- and underground

medium and high electrical power lines, radio and television trans-

mitters, GSM transmitters set close to a device system have also a

negative inuence on the range.

COOPERATION AND OPERATING RANGE

Symbol ROP-

ROP-

ROB-

SRP-

RWG-

RWL-

ROM-

RDP-

RTN-

RNK-02 180 m 200 m 200 m 200 m 200 m 250 m 180 m 250 m 250 m 180 m 250 m

RNK-04 180 m 200 m 200 m 200 m 200 m 250 m 180 m 250 m 250 m 180 m 250 m

P-256/8 230 m 250 m 250 m 250 m 250 m 300 m 200 m 300 m 300 m 230 m 300 m

P-257/4 (2)

180 m 200 m 200 m 200 m 200 m 250 m 180 m 250 m 250 m 180 m 250 m

RNM-10 230 m 250 m 250 m 250 m 250 m 300 m 200 m 300 m 300 m 230 m 300 m

RNP-01 160 m 180 m 180 m 180 m 180 m 200 m 160 m 200 m 200 m 160 m 200 m

RNP-02 160 m 180 m 180 m 180 m 180 m 200 m 160 m 200 m 200 m 160 m 200 m

RNL-01 160 m 180 m 180 m lack* lack* 200 m 160 m 200 m 200 m 160 m 200 m

RTN-01 200 m 200 m 200 m 200 m 200 m 250 m 200 m 250 m 250 m 200 m 250 m

RCR-01 160 m 180 m 180 m lack* lack* 200 m 160 m 200 m 200 m 160 m 200 m

RTI-01 160 m 180 m 180 m 180 m 180 m 200 m 160 m 200 m 200 m 160 m 200 m

RXM-01 230 m 250 m 250 m 250 m 250 m 300 m 200 m 300 m 300 m 230 m 300 m

8-CHANNEL REMOTE CONTROL P-256/8

P-256/8

TECHNICAL DATA

Input rated voltage: 3 V DC

Battery type: CR2032

Battery life: 3 ÷ 5 years (depending on use)

Number of channels: 8

Transmission: radio 868,32 MHz

Coding way: unidirectional

Coding: addressing transmission

Range: up to 300 m in the open area

Optic signalling of transmitting/bat-

tery status:

2 x LED red diode

Ambient temperature range: -10 ÷ +55

Operating position: free

Casing protection degree: IP20 (EN 60529)

Protection level: III

Pollution degree: 2

Dimensions: 152 x 43 x 17,5 mm

Weight: 0,06 kg

Reference standard: ETSI EN 300 220-1,

ETSI EN 300 220-2

DESCRIPTION

8-channel remote control P-256/8 is a universal transmitter which allows

to realise control functions as: lighting control, roller blinds opening and

closing, entry and garage gates opening/closing, etc. The remote control

is equipped with backlight elements which give signal conected with op-

erating and ergonomic silicone keyboard.

APPEARANCE

FEATURES

● remotecontrolofEXTAFREEsystemreceivers,

● possibilityofindependentcontrolofeightreceivers,

● widerangeofoperation(upto300m),

● batterypowered,

● moderndesign,

● magnetbuiltindevicecasingwhichallowstomounttheremotecon-

trol to metal surface (metal handle in the set),

● opticsignallingoftransmittingandbatterystatus,

● possibilityofsimultaneousswitchingon/switchingoffanynumberof

EXTAFREEsystemreceivers.

Optic signalling of transmitter’s operation

Push-buttons

OPERATION

After pressing the push-button the remote control sends a signal on

868,32 MHz which controls EXTA FREE receivers. Device program-

ming procedure (adding a transmitter to the transmitter’s memory)

is described in manual instruction of particular EXTA FREE sys-

tem receivers. The range (up to 300 m depending on a receiver) can

be changed by means of a retransmitter or few RTN-01 retransmitters.

BATTERY CHANGE

Battery discharge status is signalled by several LED red diode

ashes during transmission time.

Remove the screws from the bottom part of the remote control.

Remove the upper cover with the silicon keyboard.

Remove the battery from the latch.

Mount a new battery. Watch battery polarisation marked on the

latch. Wrong battery mounting may cause device damage.

Place back the top cover with the keyboard and tighten the screws.

CAUTION: While changing the battery, it is suggested to press any

of the buttons for about 5 seconds before putting it into a latch. Next

press transmission button several times to check its operation. If

the transmitter does not work properly repeat the battery change

procedure.

Andere Handbücher für P-256/8

Andere Zamel Fernbedienung Handbücher

Zamel

Zamel EXTA FREE P-256/36 Bedienungsanleitung

Zamel

Zamel EXTA LIFE P-520 Bedienungsanleitung

Zamel

Zamel P-257/2 Bedienungsanleitung

Zamel

Zamel EXTA FREE P-256/36 Bedienungsanleitung

Zamel

Zamel P-256/8 Bedienungsanleitung

Zamel

Zamel exta life P-501 Bedienungsanleitung

Zamel

Zamel EXTA FREE P-257/4 Bedienungsanleitung

Zamel

Zamel P-257/2 Bedienungsanleitung

Zamel

Zamel P-257/2 Bedienungsanleitung

Zamel

Zamel P-257/2 Bedienungsanleitung

Zamel

Zamel P-258/2 Bedienungsanleitung

Zamel

Zamel RZB-05 Bedienungsanleitung

Zamel

Zamel exta free P-257/4 Bedienungsanleitung

Zamel

Zamel Exta free GRG-01 Bedienungsanleitung

Zamel

Zamel exta life P-456/8 Bedienungsanleitung

Zamel

Zamel P-256/8 Bedienungsanleitung

Zamel

Zamel exta life P-457/2 Bedienungsanleitung

Zamel

Zamel EXTA LIFE P-456/36 Bedienungsanleitung

Zamel

Zamel extra life P-521 Bedienungsanleitung

Zamel

Zamel P-258/2 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung