Zamel EXTA ED-1 Bedienungsanleitung
ED - 1 SIGNALLING BELL INSTRUCTION MANUAL
ZAMEL Sp. z o.o.
ul. Zielona 27, 43-200 Pszczyna, Poland
Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04
FEATURES
TECHNICAL DATA
DESCRIPTION
APPERANCE
یElectromechanical bell,
یBrass bell gong in a plastic casing,
یDesigned for acoustic signalling at
home and industrial systems,
یEither surface-mounted or TH35 rail
mounted,
یDouble-module casing,
یSound level: approximately 68 dB.
The ED-1 electromechanical bell may be
used in various systems, where acoustic
signalling is needed (e.g. phase decay
signalling). The bell is designed for
mounting on TH35 rail.
The device should be
connected to a single-
phase system accordin-
gly to current standards.
The device connections
will be described in this
manual. Only qualified electricians are
allowed to mount, connect and adjust
the bell. It is necessary to read this ma-
nual before the device mounting. Do not
disassembly the timer casing or you will
lose any warranty rights and expose
yourself to the electric shock hazard.
Before mounting operation make sure
seriwnoitcennocehtgnitcennocsidfo
from the electric network. Use a cross-
head screwdriver of 3.5 mm diameter
to mount the device. The bell should
be carried, stored and used in an ap-
propriate way. Do not mount the bell in
case of any device parts lack, damage
or deformation. In case of malfunction
please notify the manufacturer.
ED - 1
Power terminals: L, N
Rated voltage: 230 V~
Rated voltage tolerance: -15 ÷ +10 %
Rated frequency: 50 / 60 Hz
Rated current: 4,5 VA
Switch-ON control: electromechanical bell
Connection terminals quantity: 2
Connection wire section: 0,2 ÷ 2,50 mm2
Operating temperature: 0 ÷ +35 oC
Operating position: optional
Casing fastening: TH 35 rail (accordingly to PN-EN 60715)
Casing IP: IP20 (PN-EN 60529)
Protection class: II
Overvoltage category: II
Pollution level: 2
Dimensions: double-module (35 mm) 90 x 35 x 66 mm
Weight: 92 g
Standard conformity: PN-EN 60669-1; PN-EN 60669-2-1
PN-EN 61000-4-2,3,4,5,6,11
Power terminals (L, N)
CAUTION
CONNECTIONS
ASSEMBLY, OPERATION
APPLICATION
CASING DIMENSIONS
PRODUCT FAMILY
The ED-1 signalling bell is a member of
the EDM product family.
1. Disconnect the electric network by
means of an appropriate cut-off,
current-limiting circuit-breaker or
separator.
2. Check if there is no any voltage
between power leads by means
of an appropriate gauge.
3. Mount the bell on TH 35 rail.
4. Connect the system leads accor-
ding to the electrical diagram.
5. Connect power supply circuit.
The bell is ready to work just right
after its appropriate connecting. The
bell starts operation after supplying
the device. The device generates the
sound until it is supplied.
TIME DIAGRAMS UNIT DIAGRAM
Device version:
01 - continuous
operation
02 - erasable
1 - bell
Device type
EDM -
xx
t
U
t
L
N
Control and L1 phase voltage drop
signalling circuit.
When L1 voltage drops below the value
preset on PNM-10 voltage relay (e.g.
200 V) the circuit will switch ON alarm
signal (the ED -1 bell).
NOTE: The bell is supplied from L2
phase. Therefore it is necessary to
maintain 230 V on this phase.
WARRANTY
The product warranty is for a period of 24 months
Dealer signature & stamp, purchase date
1. ZAMEL provides a two-year warranty for its products.
2. The ZAMEL warranty does not cover: a) mechanical defects resulting from transport, loading / unloading or other circumstances
b) defects resulting from incorrect installation or operation of ZAMEL products; c) defects resulting from any changes made by CUS-
TOMERS or third parties, to products sold or equipment necessary for the correct operation of products sold; d) defects resulting
from force majeure or other aleatory events for which ZAMEL is not liable; e) power supply (batteries) to be equipped with a device
in the moment of sale (if they appear);
3. All complaints in relation to the warranty must be provided by the CUSTOMER in writing to the retailer after discovering a defect.;
4. ZAMEL will review complaints in accordance with existing regulations.;
5. The way a complaint is settled, e.g. replacement of the product, repair or refund, is left to the discretion of ZAMEL.
6. Guarantee does not exclude, does not limit, nor does it suspend the rights of the PURCHASER resulting from the discrepancy
between the goods and the contract.
Andere Zamel Sicherheitssystem Handbücher
Beliebte Sicherheitssystem Handbücher anderer Marken
EDM
EDM Solution 6+6 Wireless-AE Bedienungsanleitung
Highway Safety Group
Highway Safety Group EA401 Bedienungsanleitung
Siren
Siren LED GSM Bedienungsanleitung
Detection Systems
Detection Systems 7090i Montageanleitung
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung
Siemens
Siemens FDM273 Bedienungsanleitung