ZappBug Room Bedienungsanleitung

The ZappBug®Room

User Manual

V3.04.22

KEEP OUT OF REACH OF CHILDREN

Manufactured For:

ZAPPBUG

1700 WESTLAKE AVE N STE 200

SEATTLE WA 98109

EPA Est. No. 101830-CHN-1

MADE IN CHINA

Box 1 of 2: Net Weight: 52 lbs (23.5 kg)

Box 2 of 2: Net Weight: 39.6 lbs (18 kg)

This page is intentionally left blank

Table of Contents

Important Safety Information....................................................4

IMPORTANT Physical or Chemical Hazards............................5

Hints & Tips...................................................................................7

Components Included..............................................................8

Directions for Use........................................................................10

1. ZappBug Room Assembly................................................................10

2. Connect All Four ZappBug Thermal Units......................................13

3. Connect Recirculation Fan to Room Frame.................................13

4. Zip the Room Closed........................................................................14

5. Wireless Thermometer Set Up..........................................................14

6. Turn on ZappBug Thermal Units.......................................................17

7. Insert Items for Heat Treatment.......................................................18

8. Run Time.............................................................................................19

9. Remove Items After Heat Treatment..............................................19

10. Folding and Storing the ZappBug Room .....................................19

Heat Treatment Chart.....................................................................20

Troubleshooting..........................................................................21

Warranty Information................................................................23

Important Safety Information

You must comply with all safety information and operating

instructions when using this product. Please read all Safety and

Hazard Information outlined in this manual.

Failure to comply could result in personal injury, damage to

property, or re hazards.

PHYSICAL OR CHEMICAL HAZARDS

Power outlets with poor electrical connections can become dangerously

overheated and may result in severe injury, damage to property, or re.

High-power appliances require more electric current than most household items.

Old or high-use outlets can have poor or loose connections. The high current

required by this product, combined with a poor electrical connection can cause

outlets to overheat and melt. It is important to make sure that any outlets used

with this product have strong electrical contact.

Follow the steps below for safe use of ANY high-power appliances:

1. Inspect outlet connection and contact strength.

Insert a standard, two-prong plug (without ground connection) into

the outlet. Ensure that both prong connections offer strong and equal

resistance when inserted. If the two-prong plug does not offer strong

resistance or one prong feels easier to insert than the other, this outlet

could be unsafe for high-power appliances. Have an electrician

inspect and/or replace the outlet before use.

2. Ensure that the outlet is no older than 15 years.

3. If you are unsure about an outlet, have an electrician inspect and/or

replace the outlet.

4. Inspect outlets and plugs after each use.

Read This IMPORTANT!

SAFETY AND HAZARD

INORMATION Before

Proceeding

IMPORTANT SAFETY AND HAZARD INORMATION

IMPORTANT: Extension Cords

Some extension cords are not adequate to carry the load of current drawn by

this ZappBug thermal unit without becoming dangerously overheated. If an

extension cord must be used, do not use a cord rated less than 1500 watts or 15

amps, and of a minimum size of 16 gauge. Only use an extension cord with the

UL seal. Use of an inadequate extension cord may result in overheating of the

extension cord or re.

IMPORTANT: Old Electrical Wiring and Outlets

Each ZappBug thermal unit will draw 12-15 amps of current (1500 Watts) and

must be run on circuits rated 15 amps and above only. Some old electrical

wiring and outlets may not be capable of sustaining these loads. If you are

unsure of the electrical wiring or outlets in your location, contact an electrician

before operating ZappBug or any other high-current products. Old or faulty

electrical wiring could lead to damage, injury, or re. If an electrical cord

appears deformed or feels hot to the touch, unplug it immediately and contact

ZappBug customer service.

Additional Safety Information

• Failure to comply with the safety information presented by this manual may

result in severe injury and/or damage to property.

• Incorrect assembly or improper use may result in hazardous conditions.

Only assemble the ZappBug Room according to instructions in this manual.

• Do not block air intake or exhaust vents on the ZappBug thermal unit.

Obstructions of the intakeor exhaust vents can cause the ZappBug thermal

unit to overheat and pose a re hazard. Always maintain 6 or more inches

of clearance around the ZappBug thermal unit during operation.

• Do not use outside or in a wet environment. This product is designed for in-

door use only.

• Do not reach into or insert objects into ventilation fan while the ZappBug

thermal unit is running. This may result in personal injury or damage to the

ZappBug thermal unit.

• Do not place ammable objects or aerosols inside the ZappBug Room.

• Some items may be damaged during heat treatment. Use care when

heat treating fragile items made of materials such as antique leather

and wood.

• Consult the manufacturer of items in question, such as electronics, for a

maximum safe temperature before placing them in the ZappBug Room.

Always monitor the temperature to ensure that it does not exceed the

recommended level.

Hints & Tips

BED BUGS

• Researchers have found that bed bugs at all life stages die quickly at

temperatures at or above 120°F.

• Bed bug eggs are nearly translucent and incredibly difcult to detect.

• A best practice is to heat treat all items that may have been in the vicinity

of bed bugs even if no bed bugs are found.

• Bed bugs can survive for up to 18 months without feeding. It is critical that

all potentially infested items are heat treated or, alternatively, sealed and

stored for 18 months.

• Bed bugs can atten their bodies and slip into tiny cracks.

• Bed bugs are unable to climb smooth, nonporous surfaces like the lining of

the ZappBug Room.

THE ZAPPBUG ROOM

• Always use provided support blocks and/or net to ensure maximum air

circulation around your belongings. If your belongings are densely packed

together it will take signicantly more time for them to reach bed bug

killing temperatures.

• Make sure to turn the ZappBug thermal unit on before placing potentially

infested items inside the ZappBug Room.

• Only use indoors with an ambient room temperature at or above 70°F. The

ZappBug thermal unit works by adding heat to the air from the room in

which it is located. If the ambient temperature is below 70°F, the ZappBug

Room may not reach bed bug killing temperatures.

• Always monitor the temperature inside the ZappBug Room with the

thermometer and thermometer probe provided.

• Do not place the ZappBug Room directly on cold oors such as

concrete. Always place the ZappBug Room on surfaces at or above 70°F.

Tent Carry Bag ZappBug Thermal Unit with

Integrated Timer

Tent Frame Wireless Thermometer

and Three Probes

X1 X4

Components Included

The following components are required for proper use of this product. If you did

not receive all of the components listed below, contact ZappBug immediately

by phone at (206)-430-5514 or by e-mail at [email protected].

Note: Some components may appear different from the representations below.

Room Tent

Recirculation Fan

Accessory Carry Bag

Extension Cord

Support Block

Use & Operation

1. ZappBug Room Assembly

Unfold The ZappBug Room with Quilted Side Down

Unzip All Five Zipper Pulls

Andere Handbücher für Room

Inhaltsverzeichnis

Andere ZappBug Insektenbekämpfungsgeräte Handbücher

ZappBug

ZappBug ZappBug Heater Bedienungsanleitung

Beliebte Insektenbekämpfungsgeräte Handbücher anderer Marken

Gardigo

Gardigo 66643 Bedienungsanleitung

Starkeys

Starkeys L25 Bedienungsanleitung

Stinger

Stinger Nosquito CT100 Series Bedienungsanleitung

Radarcan

Radarcan R-502 Bedienungsanleitung

FarmTek

FarmTek Growers supply 115106S Bedienungsanleitung

Gardigo

Gardigo MOSQUITO-KILLER Bedienungsanleitung

Radarcan

Radarcan MICE REPELLER HOME Bedienungsanleitung

Orno

Orno OR-AE-13111 Bedienungsanleitung

Fogmaster

Fogmaster FOG-001 Bedienungsanleitung

Bettio

Bettio Picoplis maxi Bedienungsanleitung

DynaTrap

DynaTrap DT150 Bedienungsanleitung

Ultrasound Tech

Ultrasound Tech ZeroZzz AIR Bedienungsanleitung

Olimpia electronics

Olimpia electronics RT-52/HACCP Bedienungsanleitung

MistAway

MistAway GEN III Handbuch

One Stop Gardens

One Stop Gardens SOLAR INSECT KILLER 95500 Kurzanleitung

Dynamic

Dynamic Dynatrap XL Bedienungsanleitung

Stinger

Stinger BKC40 Series Gebrauchs- und Pflegehandbuch

Agrimate

Agrimate AF-4000NK-VM Bedienungsanleitung