Zeiss Supreme Prime Bedienungsanleitung

ZEISS Supreme Prime

Mount Change Instructions

Table of Contents

Introduction 3

Explanation of Symbols

Overview

Delivery Contents of a ZEISS

Supreme Prime 4

Technical Data

Changing the Mount of a ZEISS

Supreme Prime 6

Detaching

a Mount 6

Attaching a Mount

Adjusting a ZEISS

Supreme Prime

to Your

Digital Camera

Testing the Sharpness

Correcting the Flange Focal Distance

Appendix

Color Code of the Shims 21

Shimming Table 21

Mount Change Accessories 22

Glossary 23

Introduction

In this manual you learn how to change the mount of a ZEISS Supreme Prime and how to match

it to a digital camera. In order to explain the procedure, this manual uses a ZEISS Supreme Prime

lens, which is scaled in feet with PL mount.

Explanation of Symbols

The information symbol indicates additional information, which is useful for the context.

The skip symbol indicates that under certain circumstances you can skip certain steps.

The result symbol indicates information about the obtained result of a step.

The warning symbol indicates dangerous situations and actions, which might impair the functionality of

the product, damage the product or hurt the user.

Overview

1front lens

2focus ring

3focus and aperture index mark

4aperture ring

5lens foot

6lens barrel

7small screw

8groove of the lens

9eXtended Data interface

10 electrical interface

11 rear lens

12 shims

13 mount including the black inner ring

14 T6 screws

Delivery Contents of a ZEISS Supreme Prime

•1x ZEISS Supreme Prime

•1x Front cap

•1x Rear cap

•1x Focus lever

•3x Lens support riser 3/8”

Technical Data

ZEISS

Supreme Prime lenses

Aperture

Focus

Length

Front

diameter

Weight

Full-

Frame

Super

Supreme Prime

21 mm

T1.5

T1.5 to

T 22

0.3 m

12”

120 mm

4.7

”

95 mm

3,7’’

1.61 kg

3.55

lbs

79.5°

59.8°

Supreme Prime

1.5

T1.5 to

T22

0.26 m

0”

119 mm

4.7

”

95 mm

3,7’’

1.42 kg

3.13

lbs

70.8°

52.3°

Supreme Prime

9 mm

1.5

T1.5 to

T22

0.33 m

3”

121 mm

4.8

”

95 mm

3,7’’

1.61 kg

3.55

lbs

64°

46.8°

1Close focus distance is measured from the image plane

2Front to PL mount flange

3The specified weight refers to the ZEISS Supreme Prime standard lenses.

4Horizontal angle of view for a full-frame camera (aspect ratio 1:1.5, dimensions 36 mm x 24 mm / 1.42“ x 0.94“)

5Horizontal angle of view for an ANSI Super 35 Silent camera (aspect ratio 1:1.33, dimensions 24.9 mm x 18.7 mm / 0.98“ x 0.74“)

Supreme Prime

5 mm

1.5

T 1.5 to

T 22

0.32 m

10”

119 mm

4.7

”

95 mm

3,7’’

1.40 kg

3.09

lbs

55°

39.6°

Supreme Prime

1.5

T 1.5 to

T 22

0.45 m

8”

119 mm

.7”

95 mm

3,7’’

1.22 kg

.69 lbs

39°

27.5°

Supreme Prime

5 mm

1.5

T 1.5 to

T 22

0.6 m

‘

121 mm

.8”

95 mm

3,7’’

30.5

30.5°

21.3°

Supreme Prime

1.5

T 1.5 to

T 22

0.84 m

2‘9

”

119 mm

4.7

”

95 mm

3,7’’

1.42 kg

3.13

lbs

24°

16.7°

Supreme Prime

100

1.5

T 1.5 to

T 22

1.1 m

3’

9”

119 mm

4.7

”

95 mm

3,7’’

1.7 kg

3.74

lbs

20.4°

14.2°

Supreme Prime

35 mm CF10

1.5

T 1.5 to

T 22

1.35 m

’5”

146 mm 95 mm

5.7

” 3,7’’

2.27 kg

5.00

lbs

15.6°

10.9°

Changing the Mount of a ZEISS Supreme Prime Lens

In this chapter you learn how to change the mount of a ZEISS Supreme Prime. The procedure

consists of two parts which are both mandatory to successfully change a mount. You learn how

to detach the currently attached mount and how to attach a different mount. To make sure the

ZEISS Supreme works properly, additionally complete the subsequent procedure: Adjusting a

ZEISS Supreme Prime to your Digital Camera.

Detaching a Mount

You need

ZEISS Supreme Prime

ZEISS T6 torx wrench with a torque of 0.4 Nm alternatively: regular

T6 torx wrench with a torque of 0.4 Nm ZEISS Interchangeable

Mount Set for Supreme Prime

The use of tools offered by ZEISS is highly recommended. You can purchase these tools directly from ZEISS

or your trusted ZEISS dealer. See Mount Change Accessories

Requirements

Ensure that your working space is flat and leveled, in order to prevent the lens from tilting and falling over.

Ensure that the environment is clean and free from dust so that no dust particles enter the ZEISS Supreme Prime.

Ensure that the front lens cap sits on your ZEISS Supreme Prime, in order to avoid scratches.

1. Place your ZEISS Supreme Prime on a flat surface with the mount facing up and the serial number facing away

from you.

The serial number is located at the side of the lens foot. The

serial number varies.

The black inner ring is securely fastened to the mount at the ZEISS factory and does not need to be

removed. This also applies to the electrical interface.

The mount is now loose.

You can now see the mount.

The shape and height of the black adapter ring varies according to the different mounts.

Remove the rear lens cap.

With a T6 torx wrench remove the eight torx screws of the mount.

When detaching the mount for the first time, do not remove the shims. Never

remove the small screw in the groove of the lens.

Carefully detach the mount from your ZEISS Supreme Prime.

If you are changing from a PL mount, you can directly see the shims.

Attaching a Mount

You need

ZEISS Supreme Prime

ZEISS T6 torx wrench with a torx of 0.4 Nm

ZEISS Interchangeable Mount Set for ZEISS Supreme Prime

The use of tools offered by ZEISS is highly recommended. You can purchase these tools directly from ZEISS

or your trusted ZEISS Dealer. See Mount Change Accessories

Requirements

Ensure that your working space is flat and leveled, in order to prevent the lens from tilting and falling over.

Ensure that the environment is clean and free from dust so that no dust particles enter the ZEISS Supreme Prime.

Ensure that the front lens cap sits on your ZEISS Supreme Prime, in order to avoid scratches.

Make sure you successfully completed Part 1: Detaching a Mount

If you are changing to a PL mount, skip step 1 and 2, since the PL mount doesn´t have an adapter ring.

1. Carefully place the adapter ring, which came with your ZEISS Interchangeable Mount Set for the ZEISS Supreme

Prime. Make sure the small screw in the groove of the ZEISS Supreme Prime sinks into groove of the adapter ring and

the electrical contact fits into the recess.

The shape and height of the black adapter ring varies according to

the different mounts.

3. Place the mount on your ZEISS Supreme Prime:

3.I PL mount: Place the PL mount on the ZEISS Supreme Prime in such a way that the recess of the mount lays on top

of the electrical interface. The groove on the other side of the PL mount should then also lay on top of the small

screw on the lens barrel.

With the T6 torx wrench tighten the torx screws using a torque of 0.4

Andere Handbücher für Supreme Prime

Inhaltsverzeichnis

Andere Zeiss Kameraobjektiv Handbücher

Zeiss

Zeiss ZF-Series Bedienungsanleitung

Zeiss

Zeiss MiniQuick T SERIES Bedienungsanleitung

Zeiss

Zeiss Lightweight Zoom LWZ.3 Bedienungsanleitung

Zeiss

Zeiss Arri 135/T1.9 Bedienungsanleitung

Zeiss

Zeiss Compact Prime CP.3 Bedienungsanleitung

Zeiss

Zeiss Camera Lens Bedienungsanleitung

Zeiss

Zeiss ZF-, ZK-, ZS- Bedienungsanleitung

Beliebte Kameraobjektiv Handbücher anderer Marken

THORLABS

THORLABS ELL15 Bedienungsanleitung

FUJICA

FUJICA ZC1000 Bedienungsanleitung

Tamron

Tamron A09 Handbuch

Sony

Sony SEL-55210 Bedienungsanleitung

Sony

Sony VCL-HG2037 Bedienungsanleitung

Honeywell

Honeywell HLM25V6F12 Bedienungsanleitung

Sony

Sony VCL-ST30 Bedienungsanleitung

Canon

Canon FD 35 - 70 mm Bedienungsanleitung

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... Bedienungsanleitung

ARRI

ARRI Lenses Bedienungsanleitung

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO Bedienungsanleitung

Sony

Sony VCL-DE07T Bedienungsanleitung

Canon

Canon FD Lens Handbuch

Tamron

Tamron A036 Bedienungsanleitung

Samsung

Samsung 20-50mm F3.5-5.6 ED II Bedienungsanleitung

Tamron

Tamron 272E Bedienungsanleitung

Sinar

Sinar Rolleiflex 6008 AF Bedienungsanleitung

Rokinon

Rokinon SP 85mm F1.2 Bedienungsanleitung