ZENEC Z-E3726 Merkblatt

INSTALLATION GUIDELINES

(C10L)-ESSENTIAL RevA Update v3.4.0

Page 1 of 2 AL

Requirements:

Note: This is only a MainSystem Software update via USB drive

USB stick with at least 2 GB memory.

A Windows based PC or notebook to prepare the USB.

Make sure that navigation microSD card inside microSD card slot of your ZENEC naviceiver (!) Don`t

take out navigation microSD card.

Note: The USB stick must be formatted to FAT32 before use (right-click on the USB drive in the Win Explorer

choose “Format” select FAT 32 start).

Installation of MainSystem Software Update via USB drive:

1. Download the software update package „Z-E3726_FEU_SW_v3.4.0.exe”.

2. The software package is a self-unzipping executable. Start extraction with a double-click and select your

USB stick as target for the uncompressed files.

3. You obtain a folder called „C10_SW_Update” in the root directory of the USB stick.

4. Make sure that navigation microSD card inside microSD card slot of your naviceiver (!) Don`t take out

navigation microSD card.

5. Connect the USB stick to your naviceiver.

6. Enter the naviceiver setup. Tap on “Device Setup” “Help” ”Software Update” “OK”.

7. The naviceiver will restart and show the ZENEC boot logo for 55sec., then auto-switch to update dialog

menu.

8. Make sure that, checkbox „1. APP” is selected. If so, tap on the „Update“ button to start the update

process.

9. Your system will be updated in a step-by-step process. The complete update procedure takes approx. 2

minutes. A status bar shows the update progress.

10. Please restart your ZENEC naviceiver, if the update process has completed successfully.

11. Calibrate the touch screen with a suitable pen.

12. Remove the USB stick.

13. Enter the naviceiver setup. Tap on “Device Setup” “Help” ”Load Factory” “OK”.

14. Please do a versions check.

Version checking:

After completion of the software update, version checking is crucial to validate full success. If the installed

software version differs with listed versions below, a full re-installation of the entire software update is

required.

Review of device software version:

To check the Main Software Version, enter the naviceiver setup. Tap on “Device Setup” ” “Help” 

”Version Info”.

Version: 3.4.0

DeviceID: Z_E3726

Notes:

Do not operate or turn off while device is performing a software update.

After completion of the software update always load the factory defaults.

[Setup „Device Setup” “Help” ”Load Factory” “OK”]

INSTALLATION GUIDELINES

(C10L)-ESSENTIAL RevA Update v3.4.0

Page 2 of 2 AL

Improvements + Bugfixes:

MainSystem General

Improved system stability and performance

Tuner

Improved response of DAB menu items during scan. Skip buttons and external SWC short press

functions remain working. Long press keeps changing trough Ensembes.

Setup

Bugfix for 180° mode in the x-over menu. 180° setting remains set after ACC OFF/ON.

Audio bugfix for “reduced volume setting” when entering reverse gear, Mute state will not unmute upon

release of reverse gear.

Steering wheel remote control

Improved short press hang up function, when ending a phone call via hang-up button.

Inhaltsverzeichnis

Andere ZENEC Auto-Navigationssystem Handbücher

ZENEC

ZENEC Z-E4626 Bedienungsanleitung

ZENEC

ZENEC ZE-NC2010 Bedienungsanleitung

ZENEC

ZENEC Z-N326 Bedienungsanleitung

ZENEC

ZENEC Z-N326 Bedienungsanleitung

ZENEC

ZENEC ZE-NC2041D Bedienungsanleitung

ZENEC

ZENEC ZE-NC2051D Bedienungsanleitung

ZENEC

ZENEC Z-E3776 Bedienungsanleitung

ZENEC

ZENEC ZE-NC4110 - MOUNTING INSTRUCTIONS FOR SANTA... Bedienungsanleitung

ZENEC

ZENEC Z-E3766 Bedienungsanleitung

ZENEC

ZENEC Z-E5514M Bedienungsanleitung

ZENEC

ZENEC Prime Z-EMAP66 Series Bedienungsanleitung

ZENEC

ZENEC ZE-NE2010 Bedienungsanleitung

ZENEC

ZENEC Z-EMAP76 Series Bedienungsanleitung

ZENEC

ZENEC Z-E3726 Bedienungsanleitung

ZENEC

ZENEC Z-E2026 Bedienungsanleitung

ZENEC

ZENEC ZE-NA150 Bedienungsanleitung

ZENEC

ZENEC ZE-NC5010 Bedienungsanleitung

ZENEC

ZENEC ZE-NC5010 Bedienungsanleitung

ZENEC

ZENEC ZE-NC5010 Bedienungsanleitung

Beliebte Auto-Navigationssystem Handbücher anderer Marken

Clarion

Clarion Navigation In-Car Entertainment Bedienungsanleitung

Rosen

Rosen DP-1001 Bedienungsanleitung

Alpine

Alpine INE-W970HD Bedienungsanleitung

Skoda

Skoda AMUNDSEN+ Bedienungsanleitung

Blaupunkt

Blaupunkt TravelPilot DX-N Bedienungsanleitung

Pioneer

Pioneer MZ360500EX Bedienungsanleitung

Sanyo

Sanyo NVM-4030 - Easy Street - Automotive GPS... Bedienungsanleitung

Kenwood

Kenwood DNN991HD Bedienungsanleitung

AvMap

AvMap Geosat 2C Bedienungsanleitung

Eonon

Eonon GE01B Bedienungsanleitung

Pioneer

Pioneer AVIC-Z920DAB Bedienungsanleitung

Nextar

Nextar M3-MX - Automotive GPS Receiver Bedienungsanleitung

Furrion

Furrion NV2200 Bedienungsanleitung

Mio

Mio MOOV 200-Series Bedienungsanleitung

Prestigio

Prestigio GeoVision 5150 Bedienungsanleitung

Hummer

Hummer 2006 H3 Bedienungsanleitung

Magellan

Magellan Maestro 4210 - Automotive GPS Receiver Konfigurationshandbuch

Garmin

Garmin StreetPilot c510 Bedienungsanleitung