ZENEC Z-E4626/H Kurzanleitung

P a g e | 1

Z-E4626/H Installation Notes

Z-E4626/H Installation Notes V1.1

Below is a list of standard settings that we recommend be set on the Universal Zenec Z-E4626/H. Some of the below

settings are only the “recommended settings” based off our testing but they may not suit the personal preferences

of the End User so it is important to show them how to change these settings.

Antenna Remote Wire –The Blue P. ANT wire on a Zenec is a switch wire and is not designed to power antenna

boosters in vehicles or antennas that require a 12v supply. We recommend connecting these wires to an

accessory/ignition source.

Steering Controls & Speed_IN –Due to the variety of different Mercedes Benz Vehicles this head unit is compatible

with, either a CTSMC011.2 (W447 Vito) or a CX401-MB01 has been provided for CAN-Bus and Steering Wheel

Controls. Connect the steering control output wire from either interface to the grey wire labelled “IR In” which is on

the same connector as the Microphone and Camera input of the Zenec device. The Pink Speed_IN wire is not used.

Bluetooth Pairing –Please READ

The Z-E4626/H has dual phone pairing functionality which allows for two handsets to be connected and used at the

same time. However, for this feature to work correctly you will need to follow the below instructions.

•Initiate the pairing of the first (most used) device

•Wait until the phone book and call history are completely downloaded to the Zenec device. This may take

some time on the first connection and will depend on the number of contacts on the phone.

•While this process is taking place, avoid using the phone for SMS or phone calls.

•Once it has completed then you can initiate the pairing of the second phone as per the above instructions.

1) After the installation is completed and BEFORE you set up anything on the device please follow the below

instructions to perform a “Load Factory”.

Go To Setup in the Home Screen and Press Device

Setup (bottom right as highlighted) then Press Help

Press OK next to Load Factory and Press Yes to confirm.

The unit will reboot.

PLEASE READ BEFORE INSTALLATION

P a g e | 2

2) Access the Car Setup Menu as Highlighted to setup the reverse camera and vehicle settings.

In Car Setup you can program the Zenec for reverse

camera and other important settings

Park Assist –This is where you program the Zenec

for reverse camera

Reverse Audio Assist –Here you can program what will

happen to the audio when Reverse is engaged

Driver Position –Please make sure that this setting is

changed to Right Hand Drive

3) Access the Bluetooth Setup Menu as Highlighted in the below Screen Shot

1. Microphone –Choose External or Internal*

2. Display Order –Change this setting to First Name

so that the BT Contacts will be display by First

Name

3. Device Name –This allows the End User to change

the BT Broadcast name so they can easily identify

the BT device they are connected too.

*We strongly advise installing an external microphone

for optimum voice quality

4) Access the TFT Settings Menu

TFT Settings –This menu allows you to change the

device brightness settings and controlled how the

device is dimmed for low light or night mode.

TFT Control –We recommend changing this setting to

Car which will adjust the brightness when the cars lights

are turned on. Navi will adjust the brightness by the

current GPS Location.

Inhaltsverzeichnis

Andere ZENEC Auto-Videosystem Handbücher

ZENEC

ZENEC Z-N528 Bedienungsanleitung

ZENEC

ZENEC ZE-NC510 Montageanleitung

ZENEC

ZENEC ZE-NC2051D Bedienungsanleitung

ZENEC

ZENEC Z-E3726 Merkblatt

ZENEC

ZENEC ZE-NC2010 Bedienungsanleitung

ZENEC

ZENEC Z-E2026 Bedienungsanleitung

ZENEC

ZENEC NC3131D Bedienungsanleitung

ZENEC

ZENEC Z-E2050 Bedienungsanleitung

ZENEC

ZENEC ZE-MR902-DVD Bedienungsanleitung

ZENEC

ZENEC Z-R1030 Bedienungsanleitung

ZENEC

ZENEC ZE-NC3810 Bedienungsanleitung

ZENEC

ZENEC ZE-NC5011D Bedienungsanleitung

ZENEC

ZENEC ZE-NC524 Bedienungsanleitung

ZENEC

ZENEC ZE-NC3810 Bedienungsanleitung

ZENEC

ZENEC ZE-MC5600 - BT COMPATIBILITY LIST V1.9 Bedienungsanleitung

ZENEC

ZENEC ZE-NC2011D Bedienungsanleitung

ZENEC

ZENEC Z-E2060 Bedienungsanleitung

ZENEC

ZENEC Z-E2014M Bedienungsanleitung

ZENEC

ZENEC ZEM-W600DDMM Bedienungsanleitung

ZENEC

ZENEC Z-N626 Gebrauchsanweisung

ZENEC

ZENEC ZE-NC5010 Bedienungsanleitung

ZENEC

ZENEC Z-R1030 Bedienungsanleitung

ZENEC

ZENEC ZE-NC5010 Bedienungsanleitung

ZENEC

ZENEC ZE-NC520 Montageanleitung

Beliebte Auto-Videosystem Handbücher anderer Marken

Stinger

Stinger HEIGH10 RB10RAM13B Bedienungsanleitung

Eonon

Eonon E1057 Bedienungsanleitung

Milion

Milion D2223 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-8153 Bedienungsanleitung

Voxx Electronics

Voxx Electronics HR8MA1 Bedienungsanleitung

Axxera

Axxera AV604Bi Bedienungsanleitung

Clarion

Clarion NX706E Bedienungsanleitung

Pyle view

Pyle view PLDN74BTi Bedienungsanleitung

Clarion

Clarion NX602 Bedienungsanleitung

PowerAcoustik

PowerAcoustik PTID-5850N Bedienungsanleitung

RCA

RCA DRC6296 - Twin 9" Mobile DVD System Benutzerhandbuch

Lanzar

Lanzar SVDVD5 Bedienungsanleitung

Kia

Kia MTXM100YPPE Bedienungsanleitung

Eonon

Eonon E1060 Bedienungsanleitung

Macrom

Macrom M-AN900 Bedienungsanleitung

Hyundai

Hyundai BAPE-L3000N Bedienungsanleitung

r.LiNK

r.LiNK RL2-UCON8-SM Bedienungsanleitung

Blaupunkt

Blaupunkt DVP 01C Bedienungsanleitung