Zenith ZHD-311 Bedienungsanleitung

SERVICE MANUAL

Product Type: DVD/CD RECEIVER

Chassis: DP9

Manua Series: ZHD-311,

LHS-25SCS, LHS-25SCW

Manua Part #:

Mode Line: D

Product Year: 2005

GENERAL

AUDIO PART

DVD & AMP PART

EXPLODED VIEWS

SPEAKER PART

REPLACEMENT PARTS LIST

................................................

............................................

....................................

..................................

.......................................

..................

Pub ished May 2005

by Technica Pub ications

Zenith E ectronics Corporation

201 James Record Road

Huntsvi e, A abama 35824-1513

Printed in U.S.A

Mode Series:

CONTENTS

ZHD-311

MODEL : ZHD-311 LHS-25SCS/LHS-25SCWSERVICE MANUAL

1-1

[CONTENTS]

SECTION 1.GENERAL

• SERVICING PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

• ESD PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

• SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-5

SECTION 2. AUDIO PART

• AUDIO TROUBLESHOOTING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

• BLOCK DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

• SCHEMATIC DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

• WIRING DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18

• PRINTED CIRCUIT DIARGAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

SECTION 3.DVD & AMP PART

• ELECTRICAL TROUBLESHOOTING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1

• DVD PART SCHEMATIC DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-22

SECTION 4. EXPLODED VIEWS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1

SECTION 5. SPEAKER PART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1

SECTION 6. REPLACEMENT PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-1

1-2

SERVICING PRECAUTIONS

NOTES REGARDING ANDLING OF T E PICK-UP

1. Notes for transport and storage

1) The pick-up should always be left in its conductive bag until immediately prior to use.

2) The pick-up should never be subjected to external pressure or impact.

2. Repair notes

1) The pick-up incorporates a strong magnet, and so should never be brought close to magnetic materials.

2) The pick-up should always be handled correctly and carefully, taking care to avoid external pressure and

impact. If it is subjected to strong pressure or impact, the result may be an operational malfunction and/or

damage to the printed-circuit board.

3) Each and every pick-up is already individually adjusted to a high degree of precision, and for that reason

the adjustment point and installation screws should absolutely never be touched.

4) Laser beams may damage the eyes!

Absolutely never permit laser beams to enter the eyes!

Also NEVER switch ON the power to the laser output part (lens, etc.) of the pick-up if it is damaged.

5) Cleaning the lens surface

If there is dust on the lens surface, the dust should be cleaned away by using an air bush (such as used

for camera lens). The lens is held by a delicate spring. When cleaning the lens surface, therefore, a cot-

ton swab should be used, taking care not to distort this.

6) Never attempt to disassemble the pick-up.

Spring by excess pressure. If the lens is extremely dirty, apply isopropyl alcohol to the cotton swab.

(Do not use any other liquid cleaners, because they will damage the lens.) Take care not to use too much

of this alcohol on the swab, and do not allow the alcohol to get inside the pick-up.

Storage in conductive bag Drop impact

NEVER look directly at the laser beam, and don’t let

contact fingers or other exposed skin.

Magnet

How to hold the pick-up

Conductive Sheet

Cotton swab

Pressure

SECTION 1. GENERAL

1-3

NOTES REGARDING COMPACT DISC PLAYER REPAIRS

1. Preparations

1) Compact disc players incorporate a great many ICs as well as the pick-up (laser diode). These components

are sensitive to, and easily affected by, static electricity. If such static electricity is high voltage, components

can be damaged, and for that reason components should be handled with care.

2) The pick-up is composed of many optical components and other high-precision components. Care must be

taken, therefore, to avoid repair or storage where the temperature of humidity is high, where strong magnet-

ism is present, or where there is excessive dust.

2. Notes for repair

1) Before replacing a component part, first disconnect the power supply lead wire from the unit

2) All equipment, measuring instruments and tools must be grounded.

3) The workbench should be covered with a conductive sheet and grounded.

When removing the laser pick-up from its conductive bag, do not place the pick-up on the bag. (This is

because there is the possibility of damage by static electricity.)

4) To prevent AC leakage, the metal part of the soldering iron should be grounded.

5) Workers should be grounded by an armband (1M Ω)

6) Care should be taken not to permit the laser pick-up to come in contact with clothing, in order to prevent

static electricity changes in the clothing to escape from the armband.

7) The laser beam from the pick-up should NEVER be directly facing the eyes or bare skin.

Resistor

(1 Mohm) Conductive

Sheet

Resistor

(1 Mohm)

Armband

1-4

ESD PRECAUTIONS

Electrostatically Sensitive Devices (ESD)

Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components

commonly are called Electrostatically Sensitive Devices (ESD). Examples of typical ESD devices are integrated

circuits and some field-effect transistors and semiconductor chip components. The following techniques should

be used to help reduce the incidence of component damage caused by static electricity.

1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off

any electrostatic charge on your body by touching a known earth ground. Alternatively, obtain and wear a

commercially available discharging wrist strap device, which should be removed for potential shock reasons

prior to applying power to the unit under test.

2. After removing an electrical assembly equipped with ESD devices, place the assembly on a conductive surface

such as aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly.

3. Use only a grounded-tip soldering iron to solder or unsolder ESD devices.

4. Use only an anti-static solder removal device. Some solder removal devices not classified as "anti-static" can

generate electrical charges sufficient to damage ESD devices.

5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ESD

devices.

6. Do not remove a replacement ESD device from its protective package until immediately before you are

ready to install it. (Most replacement ESD devices are packaged with leads electrically shorted together by

conductive foam, aluminum foil or comparable conductive materials).

7. Immediately before removing the protective material from the leads of a replacement ESD device, touch the

protective material to the chassis or circuit assembly into which the device will by installed.

CAUTION : BE SURE NO POWER IS APPLIED TO T E C ASSIS OR CIRCUIT, AND OBSERVE ALL OT ER

SAFETY PRECAUTIONS.

8. Minimize bodily motions when handing unpackaged replacement ESD devices. (Otherwise harmless motion

such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can gener-

ate static electricity sufficient to damage an ESD device).

CAUTION. GRAP IC SYMBOLS

THE LIGHTNING FLASH WITH APROWHEAD SYMBOL. WITHIN AN EQUILATERAL TRIANGLE, IS

INTENDED TO ALERT THE SERVICE PERSONNEL TO THE PRESENCE OF UNINSULATED

“DANGEROUS VOLTAGE” THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF

ELECTRIC SHOCK.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE

SERVICE PERSONNEL TO THE PRESENCE OF IMPORTANT SAFETY INFORMATION IN SERVICE

LITERATURE.

1-5

GENERAL

Power supply Refer to main label

Power consumption Refer to main label

Weight 2.5 kg

External dimensions (W x H x D) 36 x 56 x 31 mm

Operating conditions Temperature: 5°C to 35°C, Operation status: Horizontal

Operating humidity 5% to 85%

CD/DVD

Laser Semiconductor laser, wavelength 65 nm

Signal system PAL 625/5 , NTSC 525/6

Frequency response (audio) 14 Hz to 2 kHz

Signal-to-noise ratio (audio) More than 75 dB (1 kHz, NOP-3dB, 2 kHz LPF/A-Filter)

Dynamic range (audio) More than 8 dB

Harmonic distortion (audio) .5 % (1 kHz, at 12W position) (2 kHz LPF/A-Filter)

Video output 1. V (p-p), 75 Ω, negative sync., RCA jack

TUNER

Tuning Range 87.5 - 1 8. MHz or 65. - 74. MHz, 87.5 - 1 8. MHz

Intermediate Frequency 1 .7 MHz

Signal-to Noise Ratio 6 dB (Mono)

Frequency Response 14 - 1 , Hz

AM [MW]

Tuning Range 522 - 1,62 kHz or 52 - 1,72 kHz

Intermediate Frequency 45 kHz

AMPLIFIER

Surround mode Front: 3 W + 3 W (THD 1 %)

Center*: 3 W

Surround*: 3 W + 3 W (6Ω at 1 kHz, THD 1 %)

Subwoofer*: 7 W (8Ω at 3 Hz, THD 1 %)

Outputs MONITOR

MIC Jacks (ø3.5mm) (KARAOKE MODEL ONLY))

SPEAKERS

Satellite Speaker (LHS-25SCS) Passive Subwoofer (LHS-25SCW)

Type 1 Way 1 Speaker 1 Way 1 Speaker

Impedance 6 Ω 8 Ω

Frequency Response 16 - 2 , Hz 65 - 1,5 Hz

Sound Pressure Level 84 dB/W (1m) 82 dB/W (1m)

Rated Input Power 3 W 7 W

Max. Input Power 6 W 14 W

Net Dimensions (W x H x D) 92 x 115 x 8 mm 16 x 35 x 28 mm

Net Weight .5 kg 3.18 kg

(* Depending on the sound mode

settings and the source, there

may be no sound output.)

SPECIFICATIONS

2-1

SECTION 2. AUDIO PART

AUDIO TROUBLES OOTING GUIDE

1. POWER SUPPLY CIRCUIT

2-2

2. FRONT CIRCUIT (1/2)

PIN3

PIN4

PIN9

: -27.5 FL-

: -32.4 VKK

: -23.7 FL+

: +5.0

CN902 CN902

2-3

3. FRONT CIRCUIT (2/2)

Andere Handbücher für ZHD-311

Inhaltsverzeichnis

Andere Zenith Heimkinosystem Handbücher

Zenith

Zenith DVT723 Installationsanleitung

Zenith

Zenith XBS444 Bedienungs- und Wartungshandbuch

Zenith

Zenith FFH-DV25A Installationsanleitung

Zenith

Zenith ZHX-313 Bedienungs- und Wartungshandbuch

Zenith

Zenith XBS245 Series Installationsanleitung

Zenith

Zenith XBS341 Series Bedienungsanleitung

Zenith

Zenith DVT412 Bedienungsanleitung

Zenith

Zenith DVT654 Bedienungsanleitung

Zenith

Zenith XBS344 Series Installationsanleitung

Zenith

Zenith DVT316 Series Bedienungsanleitung

Zenith

Zenith XBS344 Series Bedienungsanleitung

Zenith

Zenith DVT812 Bedienungsanleitung

Zenith

Zenith DVT721 - Home Theater in a Box System Bedienungsanleitung

Zenith

Zenith ZH-T202SF Series Bedienungsanleitung

Zenith

Zenith DVT216 Bedienungs- und Wartungshandbuch

Zenith

Zenith DA3630 Installationsanleitung

Zenith

Zenith XBS344 Series Installationsanleitung

Zenith

Zenith XBS448 Bedienungsanleitung

Zenith

Zenith ZHD-311 Bedienungsanleitung

Zenith

Zenith DVT812 Bedienungs- und Wartungshandbuch

Zenith

Zenith D35 Bedienungsanleitung

Zenith

Zenith DVT310 Bedienungsanleitung

Zenith

Zenith DA3520 Bedienungsanleitung

Zenith

Zenith ZHD-311 Bedienungsanleitung

Beliebte Heimkinosystem Handbücher anderer Marken

Samsung

Samsung HT-ES4200K Bedienungsanleitung

Harman Kardon

Harman Kardon HS 100 Bedienungsanleitung

Samsung

Samsung HT-P10 Bedienungsanleitung

Philips

Philips HTS5131 Betriebsanleitung

Goodmans

Goodmans GDVD19SWS Bedienungsanleitung

Moxi

Moxi media center Bedienungsanleitung

Samsung

Samsung HT-EM35 Bedienungsanleitung

LG HE903PAW Bedienungsanleitung

Bose

Bose SoundTouch 520 Bedienungsanleitung

Sony

Sony BDV-N990W Bedienungsanleitung

Manta

Manta GK-500 Bedienungsanleitung

Sharp

Sharp SBW800 Bedienungsanleitung

Philips

Philips HTS3541 Bedienungsanleitung

LG LHT799 Bedienungsanleitung

Samsung

Samsung HT-TWZ415 Bedienungsanleitung

Loewe

Loewe REFERENCE 52 SL FHD+ 200 NMP Bedienungsanleitung

Samsung

Samsung AH68-02166R Bedienungsanleitung

RCA

RCA 600-Watt Bedienungsanleitung