Zenith MBR3430 Bedienungsanleitung

REMOTE CONTROL MODEL MBR3430

OPERATION

The multi-brand remote supplied with your new Zenith TV

allows you to operate most models of infrared (IR)

remote-controlled TVs, VCRs and cable-TV converters, even

if they are all different brands.

Your multi-brand remote has already been programmed to

operate your Zenith TV, a Zenith VCR and a Zenith cable-TV

decoder. It must be “taught” to operate other brands. Refer

to “Auto Find Mode” and “Programming Your Remote

Control” for details.

CHOOSE THE OPERATING MODE

To operate your TV, VCR or CABLE-TV decoder, you must

first choose the remote’s mode of operation. To select the

mode, press the MODE key until the desired indicator lights.

Some KEYS on the remote will always operate a particular

appliance. For example, VOLUME always operates the TV

volume and PLAY always operates the VCR. The function of

other keys depends on the mode selected.

Point toward unit

to be controlled

Operating mode selection

and indicators

Menu operations on TV

and some VCRs

Numbered buttons for

channel selection and other

uses

Learn functions for user

programmed sequences

NOTE: See following pages

for operating instructions.

MUTE

G?=*

PIP FREEZE

aEDez3am

SWAP

TIMER

SEQ

e=3

RECORD STOP PAUSE SEARCH

wcE3cEE3a

REW

PLAY

F FWD TVNCR

OFF-ON

SOURCE

FLASHBK

CHANNEL

VOLUME

Controlled device

OFF/ON

Special features on TV and

some VCRs

Channel Up/Down

for TVs, VCRs and cable

Volume Up/Down for TV

Special features on some

TVs and some VCRs

MBR3430

2736-O 4-l

REMOTE CONTROL MODEL MBR3430

TV OPERATIONS

The following functions and operations apply to your Zenith

TV. The remote control must be in the TV mode to operate

your TV.

MODE

Used to select the TV mode of

operation.

Lights when TV mode of

operation is selected.

CC (Closed Captions)

Used to view closed captions

broadcast with some television

programs.

MENU, SELECT and ADJUST

Used with on-screen menus to

see menu, select an option, and

adjust that option.

--=I

Numbered Buttons

Used to select a TV channel.

ENTER

Used to view the Channel/Time

Display or to remove any on-

screen menu or display.

LEARN

Used to program remote.

PIP

Used to activate

Picture-In-Picture inset.

SWAP

Used to swap picture in PIP inset

with the main television picture.

Point toward your

TV,

OFF/ON

Used to turn TV ON or OFF.

SOURCE

Used to display the menu of TV

sources for some TVs. Press again

to step through the source

selections. On some TVs, press to

select AUX (Auxiliary) channel,

FLASHBK (Flashback)

Used to return to the last TV

channel you were watching.

CHANNEL Up/Down

Used to sequence through the TV

channels.

VOLUME Up/Down

Used to adjust the TV’s volume.

MUTE

Used to turn off sound while the

picture remains. Press again to

restore the sound.

SPATIAL EQUALIZATION

(SW

Used to select SEQ audio mode on

TVs equipped with SEQ feature.

FREEZE

Used to freeze the motion of the

picture on the PIP inset.

TIMER

Used to activate the SLEEP

TIMER. Press repeatedly to select

desired turn-off time.

2736-O 4-2

REMOTE CONTROL MODEL MBR3430

VCR OPERATIONS

The following functions and operations apply to Zenith VCR The remote control supplied with your VCR may have keys

models built after 1988. The remote control must be in the not duplicated on the new remote. If these functions are

VCR mode to operate your VCR. desired, the original remote control will have to be used.

MODE

Used to select the VCR mode of

operation.

VCR

Lights when VCR mode of

operation is selected.

MENU, SELECT, ADJUST

and QUIT

Used with on-screen menus and

programming options of the VCR.

See VCR operating guide for details.

Numbered Buttons

Used to select a TV channel through

the VCR.

Also,

used to set the

timer in the VCR, and to enter

programming information.

ENTER

Used with the numbered buttons to

select a TV channel through the VCR.

AIW/PM

Used to set timer during

programming.

Point toward your VCR.

SOURCE

FLASHBK

CHANNEL

VOLUME

LEARN

&pQ

SWAP TIMER SEQ

c=>

CZD

RECORD STOP PAUSE SEARCH

tzaD

CEI

EES

CzP

REW PLAY F FWD TV/VCR

OFF/ON

Used to turn VCR ON or OFF.

FLASHBK (Flashback)

Used during VCR playback to

view the channel tuned by the

‘@@@@VCR

CHANNEL Up/Down

Used to sequence through channels

on the VCR.

TIMER

Activates TIME RECORD on

some VCRs. See the VCR

operating guide for details.

TV/VCR

Used to select the source of the

programs seen on the TV. Switches

the VCR between TV mode and

VCR mode.

TV Mode: Channels are selected

through the TV.

VCR Mode: Channels or tape

operation are selected through the

VCR.

RECORD, STOP, PAUSE,

SEARCH, REW, PLAY and

F FWD

Used for tape recording and

playback functions. See the VCR

operating guide for details.

2736-O 4-3

REMOTE CONTROL MODEL MBR3430

CABLE-TV OPERATIONS

The following functions and operations apply to a Zenith

cable-TV decoder. The remote control must be in the CABLE

mode to operate your cable-TV decoder.

The remote control supplied with your cable-TV decoder may

have keys not duplicated on the new remote. If these functions

are desired, the original remote control will have to be used.

MODE

Used to select the Cable mode of

operation.

CABLE

Lights when CABLE mode of

operation is selected.

MENU, SELECT, ADJUST

and QUIT

Functions depend on Cable-TV

system. See Cable-TV decoder

operating guide for details.

Numbered Buttons

Used to select channels through

Cable-TV decoder.

ENTER

Used with the numbered buttons to

select a TV channel through the

Cable-TV decoder.

Point toward

your-Cable-TV decoder.

@iii)

MENU SOURCE

FLASHBK

CHANNEL

cl3

LEARN PIP FREEZE

SWAP TIMER SEQ

CxB

cz3

RECORD STOP PAUSE SEARCH

c3zD

REW PLAY F FWD

TVlVC

OFF/ON

Used to turn VCR ON or OFF.

SOURCE

Selects “A” or “B” cable channels.

CHANNEL Up/Down

Used to sequence through channels

on the Cable-TV decoder.

2736-O

-4

REMOTE CONTROL MODEL MBR3430

PREPARATION FOR USE

Batteries are provided with this remote, but you must install

them before using the remote.

INSTALLING BATTERIES

When the effective operating range of your remote becomes

noticeably shorter, replace the batteries with two high-quality,

alkaline, size AAA batteries.

Zenith is not responsible for damage caused by battery

leakage.

After installing new batteries, the remote control will set itself

to Zenith brand codes, as follows:

TV=1

0 I, VCR=20 1 and

CABLE=30 1.

If you are going to operate equipment that uses different

codes, the remote must be reprogrammed for those codes.

AUTO FIND MODE

Use Auto Find to automatically find the brand code needed to

operate your equipment

NOTE:

If no button is pressed for 60 seconds or more during

Auto Find, the remote will automatically exit Auto Find

without storing any brand codes.

(LEDs

will flash 3 times

upon exiting.)

Turn on the equipment you wish the remote to oper-

ate.

2. Press and hold LEARN until mode indicator lights

(about 4 seconds).

Use MODE to select the mode you wish to program

(TV, VCR or CABLE).

Enter “00” then press ENTER within 2 seconds. All four

mode indicator lights will turn ON and then OFF, leaving

the mode indicator light for the active mode ON.

Point remote towards the equipment.

Press and release OFF/ON on the remote about once every

second, until the equipment turns OFF. Press ENTER

before pressing any other buttons.

If you press OFF/ON again before pressing ENTER

Auto Find will have to be repeated.

Try other buttons to see if they operate the equipment.

If they do not, you may wish to reenter Auto Find and

try to find another code. The remote will begin with

codes starting from where it left off prior to exiting

Auto Find.

___--

CHANNEL ,

~-----_

3-lII

’

g(g

L--1

CABLE-TV DECODER

Repeat Auto Find for each piece of equipment you want

your remote to operate. NOTE: Only one brand code can

be programmed in each of the four modes.

If no brand code has been entered after searching through all

brand codes in any mode, the remote will flash all four mode

indicator lights in a chasing manner. Wait 60 seconds or press

ENTER or LEARN to return to normal operation.

2736-O 4-5

REMOTE CONTROL MODEL MBR3430

PROGRAMMING BRAND CODES

Introduction

Before using your new remote control, it must be programmed

to recognize the brands of equipment it will be used to

operate.

If you are using a Zenith VHS VCR or a Zenith

cable-TV decoder, the remote has already been programmed

for you.

Find the code that corresponds to each brand and type of

equipment you are going to operate. Refer to Tables 1,2 and 3.

For example, if you were programming the remote for use

with a Zenith TV, you would look for “Zenith” in “Table I”,

and find code “101.”

Write the brand codes for your equipment on the following

lines.

TV CODE:

CABLE CODE:

VCR CODE:

Press MODE repeatedly to select the desired TV,

VCR or CABLE operating mode for the remote.

Press LEARN for about

seconds until the MODE

indicator lights for the selected TV, VCR or CABLE

mode of operation.

Enter the proper brand code number for the equipment

to be controlled.

Press LEARN. All three mode indicators should light

briefly, then turn off to indicate the brand code has

been programmed.

If all three mode indicators fail to light briefly, an

error has occurred. Repeat Steps 1-4 to try again.

Repeat steps

1-4

to program the remote for the other

equipment you are using.

NOTE: CABLE mode can be programmed to operate a

second TV or second VCR, if desired.

When batteries are removed: It will be necessary to reprogram

the proper VCR and cable-TV decoder codes.

Operating Mode

Indicators

Numbered Buttons

Use to enter code number

for desired brand.

LEARN Button

~c3~~

SWAP

TIMER

SEQ

CCDCIDCD

RECORD STOP PAUSE SEARCH

a3cEB~cz3

REW PLAY

F FWD TVNCR

Operating MODE Selector

2736-O

-6

REMOTE CONTROL MODEL MBR3430

TV, VCR AND CABLE-TV OPERATING CODES

Table 1. TV Codes by Brand

TV Brand

Name

Code

TV Brand

Name

Code

Admiral

Akai

Amark

AOC

Bell

Howell

Centurion

Coronado

Curtis Mathes

Daytron

Emerson

Fisher

General Electric

Goldstar

Go1

dstar

Hitachi

JVC

J.C. Penney

KMC

KTV

Lodgenet

Logik

LX1

Magnavox

Majestic

Marantz

Memorex

MGA/Mitsubishi

116

Montgomery Ward

119

121

Montgomery Ward

121

104

Montgomery Ward

130

103

NEC

104

NEC

12 1

Panasonic

119

Panasonic

103

Philco

116

Philco

119

Philco

121

Philco

119

Philips

103

Philips

104

Pioneer

123

Portland

124

Quasar

13 1

Quasar

136

Realistic

109

Realistic

118

Realistic

106

RCA

107

RCA

114

RCA

116

Sampo

103

Samsung

104

Samsung

119

Samsung

102

Sanyo

103

Sanyo

129

Sanyo

125

Scott

132

Sears

104

Sears

110

Sears

114

Sears

117

Sears

119

Sears

103

Sears

103

Sharp

104

Sharp

121

Sharp

121

Sharp

133

Sharp

137

Sony

103

Sylvania

112

Sylvania

113

Sylvania

119

Sylvania

127

Sylvania

128

Sylvania

121

Tatung

104

Teknika

120

Teknika

121

Teknika

104

Teknika

119

Telerent

MGA/Mitsubishi 120 Telerent

MGAMitsubishi 130 Toshiba

Montgomery Ward 103 Toshiba

Montgomery Ward 104 Toshiba

Montgomery Ward 105 Yom

Montgomery Ward 113 Zenith

Montgomery Ward 114

104

119

106

107

103

104

112

113

112

113

135

103

106

107

105

123

124

104

116

126

119

103

119

134

108

109

118

119

103

108

109

110

111

118

134

103

105

122

133

137

115

112

113

117

119

127

128

106

103

112

121

124

103

121

110

111

134

119

101

Table 2. VCR Codes by Brand

JCR Brand VCR Brand

(ame

Code Name Code

1kai 223

Pentax

215

iudio Dynamics

202

Philco

214

iudio Dynamics

2 18

Philips

214

3roksonic

22 1

Philips

227

zanon

214

Pioneer

210

zitizen

209

Pioneer

215

:raig

212

Pioneer Laser Disk

228

:urt~s

Mathes 214 Quasar

214

Curtis

Mathes 216 RCA

215

>BX 202

RCA

216

>BX 218

RCA 220

zmerson

203

RCA

227

3merson

22 1

Realistic

206

zmerson

223

Realistic

208

imerson

226

Realistic

212

lmerson

233

Realistic

214

3merson

235

Realistic

231

?sher

2 11

Samsung 220

Tisher 212

Samsung 230

yisher 213

Sanyo

206

:unai

231

Sanyo

212

General

Electric 214 Scott

204

General

Electric 216 Scott

205

General

Electric 220 Scott

233

3oldstar

209

Sears 206

Hitachi 215

Sears 209

nstant Replay 214 Sears

211

nstant Replay 227 Sears

212

202

Sears

215

225

Sharp

208

.C. Penney

214 Sony VHS

232

.C. Penney

2 18

Sony Video

217

.C. Penney

227 Sylvania

207

(enwood

202

Sylvania

214

vlagnavox

207

Sylvania

227

vlagnavox

2 14

Symphonic

231

vIarantz

207

Tashiko 209

tiararitz

2 18

Tatung 202

vlarta 209

Teat

202

demorex

212

Teat

231

tiemorex

214

Teknika

234

vIemorex

23 1

Toshiba

205

tiGA/Mitsubishi

204

Toshiba

215

vIGA/Mitsubishi

222 Vector Research

204

tiontgomery Ward 208 Vector Research

218

tiontgomery Ward 214 Yamaha

202

\/lontgomery

Ward 219 Yamaha

218

qEC

202 Zenith VHS

201

gEC

2 18

Zenith VHS

225

)anasonic

2 14

Zenith VHS

229

Table 3. Cable Decoder Codes by

Brand

Cable Decoder

Brand Name

Code

Brand Name

Code

Drake Satellite

312

Pioneer

315

Drake Satellite

330

Regency

329

Gemini

305

Samsung

335

Gemini

33 1

Scientific Atlanta

316

General Instrument

305

Scientific Atlanta

323

General Instrument

306

Scientific Atlanta

336

Ham1

302 Sprucer

Ham1

303

(Panasonic)

313

Jerrold

304

Standard

Jerrold

307

Components

335

Jerrold

308

STS Satellite

324

Jerrold

309

Telecaption 4000

325

Jerrold

310

Tocom

317

Kale Vision

335

Tocom VIP

318

Macom

3 14

Toshiba

322

Macom

32 1

Toshiba Satellite

319

Macom Satellite

322

Zenith

301

Magnavox

334

Zenith

322

NSC

335

Zenith AV3000

327

Oak

3 11

Zenith Satellite

312

Oak

332

Zenith Satellite

330

Panasonic

3 13

Zenith Satellite

328

Panasonic

320

Zenith Laser Disk

326

Paragon (Zenith)

333

2736-O 4-7

Inhaltsverzeichnis

Andere Zenith Fernbedienung Handbücher

Zenith

Zenith ZEN550 Bedienungsanleitung

Zenith

Zenith B25A11Z Bedienungsanleitung

Zenith

Zenith MBR 3474Z Konfigurationshandbuch

Zenith

Zenith ZP305MH Bedienungsanleitung

Zenith

Zenith ZH210 Bedienungsanleitung

Zenith

Zenith ZENGM2 Bedienungsanleitung

Zenith

Zenith MBR3447 Installationshandbuch

Zenith

Zenith MBR3020 Bedienungsanleitung

Zenith

Zenith ZH280 Bedienungsanleitung

Zenith

Zenith MBR3680 Bedienungsanleitung

Zenith

Zenith ZRF1 Bedienungsanleitung

Zenith

Zenith ZN551 Bedienungsanleitung

Zenith

Zenith B25A30Z Bedienungsanleitung

Zenith

Zenith LR4455 Bedienungsanleitung

Zenith

Zenith SL-6037-WH - Heath - Wireless Command Bedienungsanleitung

Zenith

Zenith Allegro MBC300P Bedienungsanleitung

Zenith

Zenith ZH110 Bedienungsanleitung

Zenith

Zenith TRK4000 Bedienungsanleitung

Zenith

Zenith MBR3410 Bedienungsanleitung

Zenith

Zenith Flash-Matic Bedienungsanleitung

Zenith

Zenith ZN735W Bedienungsanleitung

Zenith

Zenith MBC500P Bedienungsanleitung

Zenith

Zenith ZC800 Bedienungsanleitung

Zenith

Zenith MBR4275 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung