Zenoah BCX2600S Betriebsanleitung

OWNER/OPERATOR MANUAL

BRUSHCUTTERS

T3032-93110 (004)

BCX2600S

The engine exhaust from this product

contains chemicals known to the State

of California to cause cancer, birth

defects or other reproductive harm.

WARNING

Before using our brushcutters,

please read this manual carefully to

understand the proper use of your

unit.

WARNING

DRIVE UNIT 900101 and up ENGINE UNIT 900101 and up

APPLICABLE SERIAL NUMBERS :

SAFETY FIRST

Instructions contained in warnings within this

manual marked with a symbol concern

critical points which must be taken into

consideration to prevent possible serious

bodily injury, and for this reason you are

requested to read all such instructions

carefully and follow them without fail.

■WARNINGS IN THE MANUAL

This mark indicates instructions which must be

followed in order to prevent accidents which could

lead to serious bodily injury or death.

This mark indicates instructions which must be

followed, or it leads to mechanical failure,

breakdown, or damage.

This mark indicates hints or directions useful in the

use of the product.

NOTE

IMPORTANT

WARNING

CONTENTS

1. Parts location …………………………………4

2. Specifications …………………………………4

3. Warning labels on the machine ……………5

4. Symbols on the machine ……………………6

5. For safe operation ……………………………7

6. Set up…………………………………………13

7. Oil / Fuel………………………………………15

8. Operation ……………………………………17

9. Maintenance …………………………………20

10. Cleaning and storage ………………………28

11. Optional blade usage ………………………29

12. Troubleshooting guide………………………34

13. Parts list………………………………………35

2. Specifications

■BCX2600S

Overall size(LxWxH)······················································ 72.5(1840)x12.5(320)x13.6(345) in(mm)

Dry weight w/o acc.····························································································· 11.6 lbs (5.25kg)

Engine Type······················································································ Air-cooled 4-stroke gasoline

Model··········································································································· Zenoah F26A

Displacement ····················································································· 1.65cu-in (26.2cm3)

Max. output ································································· 1.05Hp (0.8kW)at 7500/min-1(rpm)

Idle speed··························································································3200±200/min-1(rpm)

Fuel····································································································· Unleaded Gasoline

Carburetor ··················································································· Walbro Diaphragm type

Spark plug···························································································Champion RDZ19H

Fuel tank capacity·······························································································20.0 fl.oz (0.59 )

Transmission··········································································· Centrifugal clutch, Rigid driveshaft

Reduction ratio ····················································································································· 1.357

Cutting head rotating direction ················································ Counter-clockwise(Operator view)

Standard Accessories

4 in. 2-line Head ········································································································ 1 pc.

Shoulder Strap ·········································································································· 1 pc.

Goggle······················································································································· 1 pc.

Tool Kit ······················································································································ 1 pc.

Specifications are subject to change without notice.

1. Parts location

1. Loop handle

2. Shoulder strap hanger

3. Ignition switch

4. Throttle cable

5. Throttle lever

6. Throttle set button

7. Drive shaft housing

8. Debris guard

9. Cutting line head

4

10. Gear case

11. Spark arrester

12. Fuel tank

13. Oil port

14. Starter knob

15. Choke lever

16. Primer pump

17. Air cleaner cover

(1)Read owner's manual before operating

this machine.

(2)Wear head, eye and ear protection.

(3)Warning/Attention

(4)Keep all children, bystanders and

helpers 15 meters away from the

brushcutter

If warning label peel off or become soiled

and impossible to read, you should contact

the dealer from which you purchased the

product to order new labels and affix them in

the required location(s).

Never modify your brushcutter.

We won't warrant the machine, if you use

the remodeled brushcutter or you don't

observe the proper usage written in the

manual.

WARNING

IMPORTANT

3. Warning labels on the machine

5

(1)Lire le mode d’emploi avant d’utiliser

cette machine.

(2)Porter un casque de sécurité, des

lunettes de sécurité et un casque

antibruit.

(3)Avertissement/Attention

(4)Interdire aux enfants ou à toute

personne de s’approcher dans un

rayon de 15 mètres de la

débroussailleuse.

Si les étiquettes d’avertissement se

décollent, deviennent sales ou impossible à

lire, commander de nouvelles étiquettes

auprès du revendeur pour les remplacer.

Ne pas modifier la débroussailleuse.

La garantie sera annulée si la

débroussailleuse a été modifiée ou

utilisée de manière non conforme aux

instructions de ce mode d’emploi.

AVERTISSEMENT

IMPORTANT

6

For safe operation and maintenance,

symbols are carved in relief on the machine.

According to these indications, please be

careful not to take a mistake.

(a)The port to refuel the “UNLEADED FUEL”

Position:

FUEL TANK CAP

(b)The direction to close the choke

Position:

AIR CLEANER COVER

Position:

AIR CLEANER COVER

4. Symbols on the machine

Des symboles en relief ont été placés sur la

machine pour assurer la sécurité à l’usage et

faciliter l’entretien. Prendre soin d’observer

les indications suivantes afin d’éviter les

erreurs.

(a)Orifice de remplissage du carburant

“Essence sans plomb”

Emplacement :

BOUCHON DU RESERVOIR DE

CARBURANT

(b)Position fermée du starter

Emplacement:

CAPOT DU FILTRE A AIR

Emplacement:

CAPOT DU FILTRE A AIR

IMPORTANT

ENGINE INFORMATION

THIS ENGINE MEETS U.S.EPA PH1

AND 2000 AND LATER CALIFORNIA

EMISSION REGULATIONS FOR SMALL

OFF-ROAD ENGINES WITH AN EMISSION

DURABILITY PERIOD OF 300 HOURS.

ENGINE FAMILY : XKZXS.0264YZ;EM

ENGINE DISPLACEMENT : 26.2cc

REFERTO OWNER’S MANUAL FOR MAINTE-

NANCE SPECIFICATIONS AND ADJUSTMENTS.

Ce moteur est conformc aux normcs U.S.

EPA PH1 et 2000 ainsi qu’aux autres dispositions

ultérieures de la réglementation concernant la pollution

de l’air pour les petits moteurs tout-terrain avec une

période de durabilité opour les émissions de 300 heures.

Type de moteur : XKZXS.0264YZ;EM

Cylindrée du moteur : 26,2cc

Se référer au Manuel de l’utilisateur pour les

spécifications d’entretien et les réglages.

INFORMATION IMPORTANTE

CONCERNANT LE MOTEUR

7

5. For safe operation

1. Read this manual carefully until you

completely understand and follow all safety

and operating instructions.

2. Keep this manual handy so that you may refer

to it later whenever any questions arise. Also

note, if you have any questions which cannot

be answered herein, contact the dealer from

whom you purchased the product.

3. Always be sure to include this manual when

selling, lending, or otherwise transferring the

ownership of this product.

4. Never allow children or anyone unable to fully

understand the directions given in the manual

to use the machine.

■WORKING CONDITION

1. When using the product, you should wear proper

clothing and protective equipment.

(1)Helmet

(2)Ear protectors

(3)Protection goggles or face protector

(4)Thick work gloves

(5)Non-slip-sole work boots

2. And you should carry with you.

(1)Attached tools and files

(2)Properly reserved fuel

(3)Spare blade

(4)Things to notify your working area (rope,

warning signs)

(5)Whistle (for collaboration or emergency)

(6)Hatchet or saw (for removal of obstacles)

3. Do not wear loose clothing, jewelry, short

trousers, sandals, or go barefoot. Do not wear

anything which might be caught by a moving

part of the unit. Secure hair so it is above

shoulder length.

■WORKING CIRCUMSTANCE

1. Never start the engine inside a closed room or

building. Exhaust gases contain dangerous

carbon monoxide.

2. Never use the product,

a. when the ground is slippery or when you can’t

maintain a steady posture.

8

b. At night, at times of heavy fog, or at any other

times when your field of vision might be

limited and it would be difficult to gain a clear

view of the working area.

c. During rain storms, during lightning storms, at

times of strong or gale-force winds, or at any

other times when weather conditions might

make it unsafe to use the product.

■WORKING PLAN

1. You should never use the product when under

the influence of alcohol, when suffering from

exhaustion or lack of sleep, when suffering from

drowsiness as a result of having taken cold

medicine or at any other time when a possibility

exists that your judgment might be impaired or

that you might not be able to operate the product

properly and in a safe manner.

2. When planning your work schedule, allow plenty

of time to rest. Limit the amount of time over

which the product is to be used continuously to

somewhere around 30~40 minutes per session,

and take 10~20 minutes of rest between work

sessions. Also try to keep the total amount of

work performed in a single day under 2 hours or

less.

1. If you don’t observe the working time, or

working manner (See ■USING THE

PRODUCT), Repetitive Stress Injury(RSI)

could occur.

If you feel discomfort, redness and swelling

of your fingers or any other part of your

body, see a doctor before getting worse.

2. To avoid noise complaints, in general,

operate product between 8a.m. and 5p.m. on

weekdays and 9a.m. to 5p.m. weekends.

Check and follow the local regulations as to sound

level and hours of operations for the product.

NOTE

WARNING

5. For safe operation

■BEFORE STARTING THE ENGINE

1. The area within a perimeter of 50 feet (15m) of

the person using the product should be

considered a hazardous area into which no one

should enter. If necessary yellow warning rope,

warning signs should be placed around the

perimeter of the area. When work is to be

performed simultaneously by two or more

persons, care should also be taken to constantly

look around or otherwise check for the presence

and locations of other people working so as to

maintain a distance between each person

sufficient to ensure safety.

2. Check the condition of working area to avoid any

accident by hitting hidden obstacles such as

stumps, stones, cans, or broken grass.

Remove any obstacle before beginning work.

3. Inspect the entire unit for loose fasteners and

fuel leakage. Make sure that the cutting

attachment is properly installed and securely

fastened.

4. Be sure the debris guard is firmly attached in

place.

5. Always use the shoulder strap. Adjust the strap

for comfort before starting the engine. The strap

should be adjusted so the left hand can

comfortably hold the handlebar grip

approximately waist high.

■STARTING THE ENGINE

1. Keep bystanders and animals at least 50 feet

(15m) away from the operating point. If you are

approached, immediately stop the engine.

2. The product is equipped with a centrifugal clutch

mechanism, so the cutting attachment begins to

rotate as soon as the engine is started by putting

the throttle into the start position. When starting

the engine, place the product onto the ground in

a flat clear area and hold it firmly in place so as

to ensure that neither the cutting part nor the

throttle come into contact with any obstacle

when the engine starts.

IMPORTANT

5. For safe operation

9

10 

Never place the throttle into the high speed

position when starting the engine.

3. After starting the engine, check to make sure

that the cutting attachment stops rotating when

the throttle is moved fully back to its original

position. If it continues to rotate even after the

throttle has been moved fully back, turn off the

engine and take the unit to your authorized Red

Max servicing dealer for repair.

■USING THE PRODUCT

Cut only materials recommended by the

manufacturer. And use only for tasks explained

in the manual.

1. Grip the handles firmly with both hands using

your whole hand. Place your feet slightly apart

(slightly further apart than the width of your

shoulders) so that your weight is distributed

evenly across both legs, and always be sure to

maintain a steady, even posture while working.

2. Keep cutting attachment below waist level.

3. Maintain the speed of the engine at the level

required to perform cutting work, and never raise

the speed of the engine above the level

necessary.

4. If the unit start to shake or vibrate, turn off the

engine and check the whole unit. Do not use it

until the trouble has been properly corrected.

5. Keep all parts of your body away from rotating

cutting attachment and hot surfaces.

6. Never touch the muffler, spark plug, or other

metallic parts of the engine while the engine is in

operation or immediately after shutting down the

engine. Doing so could result in serious burns or

electrical shock.

IMPORTANT

WARNING

5. For safe operation

Inhaltsverzeichnis

Andere Zenoah Freischneider Handbücher

Zenoah

Zenoah BC4301FW Bedienungsanleitung

Zenoah

Zenoah BC4300FWM Bedienungsanleitung

Zenoah

Zenoah BC2601DLM-1 Bedienungsanleitung

Zenoah

Zenoah BC4501LE/WE Bedienungsanleitung

Zenoah

Zenoah BK3402FL Bedienungsanleitung

Zenoah

Zenoah BCZ2601S Handbuch

Zenoah

Zenoah BC2300LE Bedienungsanleitung

Zenoah

Zenoah BCZ2600DL Bedienungsanleitung

Zenoah

Zenoah BCZ2400S Betriebsanleitung

Zenoah

Zenoah BCZ2602DL Bedienungsanleitung

Zenoah

Zenoah BCZ4505DW Bedienungsanleitung

Zenoah

Zenoah Zenoah BCZ3200DL Bedienungsanleitung

Zenoah

Zenoah BCZ3000DW Bedienungsanleitung

Zenoah

Zenoah BCZ2610S-CA Handbuch

Zenoah

Zenoah BC4350FW Bedienungsanleitung

Zenoah

Zenoah EXZ2600DL Bedienungsanleitung

Zenoah

Zenoah BC340FWM Bedienungsanleitung

Zenoah

Zenoah BK2650DL-Hb Bedienungsanleitung

Zenoah

Zenoah BK3501FL Bedienungsanleitung

Zenoah

Zenoah BCZ3000 Betriebsanleitung

Zenoah

Zenoah BCZ4000DL Bedienungsanleitung

Zenoah

Zenoah BC3450DW Bedienungsanleitung

Zenoah

Zenoah EXZ2610DL Bedienungsanleitung

Zenoah

Zenoah BKZ4500DL Bedienungsanleitung

Beliebte Freischneider Handbücher anderer Marken

Echo

Echo SRM-265ES Series Montageanleitung

Victus

Victus VB 260 L Bedienungsanleitung

Solo

Solo 128L Bedienungsanleitung

Stihl

Stihl FS 410 C-M Bedienungsanleitung

CanyCom

CanyCom CMX 253 Bedienungsanleitung

Makita

Makita EBH340U Bedienungsanleitung

EGO

EGO BCA1220 Bedienungsanleitung

VARO

VARO Powerplus POWXG3016 Bedienungsanleitung

Stihl

Stihl FS 510 C Bedienungsanleitung

Lawn-King

Lawn-King FW35E Bedienungs- und Montageanleitung

Husqvarna

Husqvarna 553RBX Bedienungsanleitung

Ryobi

Ryobi RBC430SBS Bedienungsanleitung

RedMax

RedMax EXtreme EXZ2401S-BC Betriebsanleitung

Vito Agro

Vito Agro VIR43E Bedienungsanleitung

Black & Decker

Black & Decker 82267 Bedienungsanleitung

Agrimate

Agrimate AM-3000-BC-2S-WC-PRO Bedienungsanleitung

Echo

Echo SRM-410ES Bedienungsanleitung

PrimAster

PrimAster PMAFS 40 Bedienungsanleitung