Zenoah G240RC Bedienungsanleitung

OWNER'S MANUAL

Thank you for using ZENOAH ENGINE.

●Please read this Owner’s Manual thoroughly before operating and use the

engine correctly according to this Owner’s Manual.

(For safety reasons, please contact your sales dealer before operating this

engine if there is something that you do not understand.)

●This engine has been designed for the use of radio control car.

Please use this engine in conjunction with the manual for radio control car or

radio control equipment you are going to use.

●Any modification of the engine or any use of other applications is prohibited.

●The purchaser (user) shall bear all obligations and responsibilities stipulated

by law, local ordinance and the likes.

Husqvarna Zenoah Co., Ltd. shall bear no responsibility whatsoever.

Model: G240RC/G270RC/G290RC

Model code: X374323111 (G240RC)

Model code: X374326111 (G270RC)

Model code: 966669901 (G290RC)

115 39 20-26 (007)

SPECIFICATIONS.....................................................4

SAFETY PRECAUTIONS..........................................5

FUEL .........................................................................7

ENGINE STARTING..................................................8

OPERATION .............................................................9

MAINTENANCE ......................................................10

SPECIAL TOOLS ....................................................15

SERVICE GUIDE ....................................................16

TROUBLE SHOOTING ...........................................19

PARTS LIST (G240RC)...........................................22

PARTS LIST (G270RC)...........................................26

PARTS LIST (G290RC)...........................................30

WARRANTY............................................................34

CONTENTS

SPECIFICATIONS

Engine Type G240RC G270RC G290RC

Overall Size (L x W x H) 166 x 205 x 196mm

Weight 2.07kg

Displacement 22.5cm325.4cm328.5cm3

Clutch Engagement 6000rpm (STD Spring)

Carburetor Type WT-990

Spark Plug NGK CMR7H

Spark Plug Gap 0.65mm

Rotating Direction Counter-Clockwise (View From PTO)

SAFETY PRECAUTIONS

●These safety precautions are to prevent you and those people in the

vicinity from incurring harm or damage. Make sure to observe these

precautions and constantly strive to ensure safety.

●Safe use of the engine is your personal obligation and responsibility.

Constantly take care to act with good judgment as you enjoy your

hobbies.

•The fuel is toxic. Do not let it get into your eyes or mouth. Store it in a

cool place, out of the reach of infants and children.

•Use of open flames around the fuel is strictly prohibited, because of

danger of fire.

•To prevent burns, make sure not to touch the engine while it is

operating or immediately after it has stopped.

•Do not run the motor in poorly ventilated places. Do not breathe the

exhaust, as it is a health hazard.

•Please wear clothing that facilitates your safety. Remove all scarves,

SAFETY PRECAUTIONS

overly long sleeves, neckties and the like. Failure to do so could result

in injury.

•When mounting the engine to a model, make sure to follow the model’s

operating manual. If necessary, reinforce the engine mounting unit and

the peripheral parts.

FUEL

•Mix gasoline (octane over 95) and high grade 2 cycle engine oil (mixing use type;

F3C grade or ISO EGC grade) at mixing ratio 25~40:1.

•The mixing ratio is according to the oil recommendation.

[ NOTE ]

1) Never use any alcohol fuel or alcohol added fuel, or the rubber parts in the

carburetor and engine will be damaged.

2) Gasoline is very flammable. Avoid smoking and any fires near fuel.

3) To prevent all possible problems on fueling system, make sure to use the fuel filter

which has more than 300 mesh or equivalent and gasoline proof rubber pipe or

equivalent.

Incorrect fuel filter may cause engine trouble like fuel passage stuffing in carburetor,

or piston surface scratching etc.

ENGINE STARTING

•Push the primer pump several times until overflown fuel

flows out. (Fig.1)

•Close the choke lever, and move the throttle lever

1/4~1/3 open position. (Fig.1)(Fig.2)

•Pull the starter(knob) quickly until first firing noise.

(Fig.3)

•Open the choke(Fig.2), throttle idle~1/4 open

•Pull the starter quickly

•Operate engine for a few minutes for the warming up.

•In case of engine warm condition, choking may not be

necessary.

•Over choking may cause starting difficulty due to wet

spark plug.

In this case change spark plug or dry it, and remove

fuel rest in the cylinder by pulling starter.

IMPORTANT

Choke Lever

Open

Primer Pump

Fig.1

Throttle Lever

Fig.2

Fig.3

OPERATION

•This engine is already tuned up to get high power and high speed, and needs correct

maintenance to keep such high performance.

•The details for operation may be described in the separate owners manual to be

issued by car manufacturer.

•Be sure to have the engine cool down for 30 seconds at idle speed after full throttle

running.

MAINTENANCE

1) MAINTENANCE CHART

Before Every Every

Items Action Use 25 hours 100 hours Note

Leakage, Check ✔

Damage/Crack

Idling Speed Check/Adjust ✔✔✔

Air-cleaner Check/Cleaning ✔✔ Replace if necessary

Spark Plug(gap) Check/Adjust ✔✔ ↑

Cylinder(barrel) Check/Cleaning ✔✔ ↑

Piston, Ring Check/Cleaning ✔✔ ↑

Muffler & Bolt Check/Cleaning ✔✔✔ ↑

Bearings Check/Cleaning ✔✔ ↑

Crank Shaft Check/Alignment ✔↑

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Zenoah Motor Handbücher

Zenoah

Zenoah G200PU Bedienungsanleitung

Zenoah

Zenoah G25B-1 Bedienungsanleitung

Zenoah

Zenoah G320RC Bedienungsanleitung

Zenoah

Zenoah G430RC Bedienungsanleitung

Zenoah

Zenoah G200PU-EI Bedienungsanleitung

Zenoah

Zenoah Komatsu G260RC Anwendungshandbuch

Zenoah

Zenoah G260PU-EI Anwendungshandbuch

Zenoah

Zenoah G300PUM Bedienungsanleitung

Zenoah

Zenoah G4LS-D Bedienungsanleitung

Zenoah

Zenoah G320PUM Bedienungsanleitung

Zenoah

Zenoah G320RC Bedienungsanleitung

Zenoah

Zenoah GZ50N Bedienungsanleitung

Zenoah

Zenoah AIR G26 Bedienungsanleitung

Zenoah

Zenoah G620PU Bedienungsanleitung

Zenoah

Zenoah G4K-D Bedienungsanleitung

Zenoah

Zenoah G450PU Bedienungsanleitung

Zenoah

Zenoah Komatsu G230RC Anwendungshandbuch

Zenoah

Zenoah 966669901 Bedienungsanleitung

Zenoah

Zenoah G800BPU Bedienungsanleitung

Zenoah

Zenoah G230PU Bedienungsanleitung

Zenoah

Zenoah G380PU Bedienungsanleitung

Zenoah

Zenoah G261LS Bedienungsanleitung

Zenoah

Zenoah G231 Heli Bedienungsanleitung

Zenoah

Zenoah G230PU Bedienungsanleitung

Beliebte Motor Handbücher anderer Marken

Rotax

Rotax 125 senior MAX evo Bedienungsanleitung

Kohler

Kohler K361 Bedienungsanleitung

MTD

MTD OHV Series Bedienungsanleitung

Kohler

Kohler COMMAND CH18-745 Bedienungsanleitung

Mercury

Mercury D4.2L D-Tronic Bedienungsanleitung

Selve

Selve SE Plus-RC Series Bedienungsanleitung

Perkins

Perkins 1206E-E66TA Bedienungsanleitung

Skov

Skov DA 174 Handbuch

Rossi

Rossi TX11 Series Bedienungsanleitung

Siemens

Siemens SIMOTICS T-1FW3 Merkblatt

AL-KO

AL-KO PRO 350 Bedienungsanleitung

MTU

MTU 12 V 4000 Lx4 Bedienungsanleitung

Nanni

Nanni N3.30 Gebrauchsanweisung

Nanni

Nanni N5.160 CR2 Bedienungsanleitung

KSB

KSB SuPreme Series Montageanleitung

Hiwin

Hiwin EM1 Series Bedienungsanleitung

Rotax

Rotax 912 i series Betriebsanleitung

Siemens

Siemens SIMOTICS XP 1MB1 Bedienungsanleitung