ZEPP BASEBALL Bedienungsanleitung
!
ZEPP BASEBALL USER GUIDE
Updated April 30, 2015
Getting Started 1
What’s Included 1
iOS & Android Requirements 1
Downloading the Zepp Baseball App 1
Turning on the Zepp Sensor 2
Pairing the Zepp Sensor 2
Getting to know the Zepp Sensor 4
Mount your Zepp Baseball Sensor 5
Capture a Swing 5
Flash Storage Capability 6
Battery Life, Charging and Power 6
Firmware Updates 6
Multi-Sport Functionality 7
Favorite a Swing 7
Storage 7
LED Indicator Lights 7
Getting to know the Zepp App 9
What the Zepp Sensor Measures 10
Home Screen 11
TABLE OF CONTENT
3D View 11
Dashboard View 11
Video View 11
My History 12
Cloud Sync 12
Pro Players 12
Training Center 12
Lab Reports 13
Zepp Insights 13
Swing Goals 13
Multi-Player Management 13
Result Tagging 15
Control Center 15
Compare a Swing 15
Share a Swing 16
Delete a Swing 16
Screen Lock 16
Low Battery Indicator 16
General Information & Specifications 17
App Updates 18
Using your Zepp in Wet Conditions 18
Customer Support 18
Technical Specifications 18
Return Policy and Warranty 18
Regulatory and Safety Notices 19
Getting Started!
ZEPP BASEBALL USER GUIDE
Page 1
What’s Included iOS & Android Requirements
iPhone 4S+, iPad 2nd Generation+, iPod Touch 5th Generation
-iOS 7.0 or later
-Android - v4.1 or later
Downloading the Zepp Baseball App
You will need to download the free Zepp Baseball app to use your sensor
or the video feature.
1. Click on the App Store or Google Play icon on your iOS or Android
device.
2. In the search toolbox, enter Zepp Baseball.
3. There will be an icon with an add feature that says "Free" for iOS users
and "Install" for Android users. Click this icon. A new green icon will
appear asking "Install App”. Tap it.
4. Once the download is complete you can find Zepp Baseball on your
device.
ZEPP BASEBALL USER GUIDE
Page 1
Turning on the Zepp Sensor
To turn it on, press in from the side towards the LED channel (see image
below). You should feel the button push in slightly when you do this. Hold
for at least 4 seconds when pushed in. If it doesn't turn on try holding a
bit longer and adjusting your finger to the top corner.
Pairing the Zepp Sensor
Pairing an iOS Device
1. Select the Settings icon and then select Bluetooth.!If Bluetooth is not
enabled, turn it on.
2. Your iOS device will automatically search for Zepp. This may take up to
15-30 seconds.!Once found, a pop up "Bluetooth Pairing Request" will
appear. !Select Pair.
3. When paired, your device will note Zepp “Connected”.
4. After connection has been established, another pop up will appear
asking you to allow Zepp to communicate with the Zepp App. !Select
Allow.
5. From this point on, your iOS device will automatically pair with Zepp
Baseball. !Unless if you turn Bluetooth off or unconnected Zepp by
selecting “Forget this Device”, you will not need to pair the device when
you turn on your Zepp.
ZEPP BASEBALL USER GUIDE
Page 2
Pairing an Android device
1. Select the Settings icon and then select Bluetooth.!If Bluetooth is not
enabled, turn it on.
2.With some Android OS, you may receive a pop up message to let you
know the Bluetooth is paring with your Zepp device. Select "OK".
3.It will take approximately 15-30 seconds for Zepp to pair with the
device. When paired, your device will note Zepp “Paired”.
4.From this point on, your Android device will automatically pair with
Zepp. !Unless if you turn Bluetooth off or unconnected Zepp, you will
not need to pair the device when you turn on your Zepp.
Note - The Zepp sensor can only connect to one mobile device at a time.
If you would like to pair the sensor to a second mobile device, you must
first un-pair it from the initial mobile device.!
ZEPP BASEBALL USER GUIDE
Page 3
Getting to know the Zepp Sensor!
ZEPP BASEBALL USER GUIDE
Page 4
Mount your Zepp Baseball Sensor
Start by attaching the mount to the knob of the bat. Once mounted to the
bat insert the sensor into the mount and press firmly to ensure a secure
fit.
Capture a Swing
Once you have established Bluetooth connection and mounted the sensor
to your bat you’re almost ready to capture a swing.
1. Open the app. Follow the steps to create your account if you haven’t
done so already.
2.Wait for the yellow sensor icon to appear and become solid in the upper
left corner of the Home Screen. ( 1 ) Once the light becomes solid, the
app will ask you to calibrate the sensor. We recommend calibrating the
sensor prior to each swing session. If you are not asked to calibrate or
wish to recalibrate the sensor, tap the yellow sensor icon.
3.Select “Swing Now” ( 2 ) to open the 3D view as this screen is the main
swing screen. Once in the 3D view, select the bat you are using by
tapping the bat icon in the located next to the calibration icon. ( 3 )
4.Step up to the plate, take a swing, and make contact with the ball! !Each
time you make contact with a ball the app will replay your 3D swing
within a few seconds.!
Note - Making contact with a ball is required to capture a swing.
ZEPP BASEBALL USER GUIDE
Page 5
2
1
3
Inhaltsverzeichnis
Andere ZEPP Fitness Electronic Handbücher
