4
NOTICE:This product complies with IC: ICES-006; en conformité avec IC: NMB-006
IMPORTANT SAFETY INSTRUCTIONS
This product is intended for connection to the AC power line. For installation
instructions, refer to the Installation section. The following precautions should be
taken when using this product.
zPlease read all instructions before installing and operating this product.
zPlease keep all instructions for later reference.
zPlease follow all warnings and instructions marked on the product.
zFor safety reason, when device is being powered on, this product should
NOT be installed in any electric socket which makes the surface with
venting holes on the product to face downward (facing the floor).
zUnplug the Powerline device from the wall outlet before cleaning. Use a
dry cloth for cleaning. DO NOT use liquid cleaners or aerosol cleaners.
zDO NOT operates this product near water.
zThis product should never be placed near or over a radiator, or heat register.
zThis product relies on the building’s electrical installation for short-circuit (over
current) protection.
zDO NOT allow anything to rest on the product interconnect plug. DO NOT
locates this product where people may walk on the cords.
zBecause this product sends data over the power line, it is recommended that
you plug directly into a power outlet. Do not plug the device into a UPS or
power strip with surge protection. The product has its own power filter for
protection against surges.
zOnly a qualified technician should service this product. Opening or removing
covers may result in exposure to dangerous voltage points or other risks.
zUnplug the product from the wall outlet and refer the product to qualified
service personnel for the following conditions:
¾When the interconnect cords are damaged or frayed.
¾If liquid has been spilled into the product.
¾If the product has been exposed to rain or water.
¾If the product does not operate normally when the operating instructions
are followed.
¾If the product exhibits a distinct change in performance.
