3505 Hutchinson Road, Cumming GA 30040
1-800-633-0405 www.automationdirect.com
Copyright 2008, AutomationDirect.com Incorporated/All Rights Reserved Worldwide 6/23/2009 Document # Z -RTB50 Rev3
WARNING: To minimize the risk of potential safety problems, you
should follow all applicable local and national codes that regulate the
installation and operation of your equipment. These codes vary from
area to area and it is your responsibility to determine which codes
should be followed, and to verify that the equipment, installation, and
operation are in compliance with the latest revision of these codes.
Equipment damage or serious injury to personnel can result from
the failure to follow all applicable codes and standards. We do not
guarantee the products described in this publication are suitable for
your particular application, nor do we assume any responsibility for
your product design, installation, or operation.
If you have any questions concerning the installation or operation
of this equipment, or if you need additional information, please call
Technical Support at 770-844-4200.
This publication is based on information that was available at the
time it was printed. At AutomationDirect.com® we constantly strive to
improve our products and services, so we reserve the right to make
changes to the products and/or publications at any time without notice
and without any obligation. This publication may also discuss features
that may not be available in certain revisions of the product.
Specifications
Description* 50-Pole Connector odule for interfacing
SureServo I/O to a controller
Approv ls File # E200031 UL, cUL, Class 1, Division 2,
Groups A,B,C,D Hazardous Locations,
CE, EN 61131-2:2007
Oper tion Volt ge** 0-30VDC
Volt ge R ting 24VDC
M ximum Current per Circuit 0.2A
M ximum Current per Module 10A
Number of Termin l Block Positions 50
Surrounding Temper ture R nge 32 to 140°F (0 to 60°C)
Termin l Block Cont cts Copper alloy, tin-lead plated
Wire R nge (R ted Cross Section)** 12-24AWG Solid or Stranded Copper Conductor
(2.5mm²)
Wire Strip Length 0.24-0.27” (6-7mm)
Screw Torque 4.4 in-lbs (0.5 Nm)
Connector Type 3 mini DELTA Ribbon ( DR), 101 Series, 50
pin Example: Plug 10150 - 3000VE,
Shell 10350 - 52A0 - 008
Dimensions (WxHxD) 5.46” x 1.89” x 1.87” (138.6mm x 48.1mm x
47.5mm)
Connecting C ble (Sold sep r tely) ZL-SVC-CBL50 (0.5m/1.6ft)
ZL-SVC-CBL50-1 (1m/3.3ft)
ZL-SVC-CBL50-2 (2m/6.6ft)
C ble/Wire Cle re nce 4.00” (101.6mm) top and bottom
Mounting Restrictions None
De cription
The Z -RTB50 is a DIN rail mounted feed through
module designed to interface the SureServo
servo drive analog and discrete control signals to
a P C or other controllers by connecting the
Z -SVC-CB 50 cable between the SureServo
CN1 connector and the Z -RTB50 connector.
Cable
The Z -SVC-CB 50 is available in three lengths.
• Z -SVC-CB 50 0.5m (1.6ft)
• Z -SVC-CB 50-1 1m (3.3ft)
• Z -SVC-CB 50-2 2m (6.6ft)
Feedthrough Connector Module
Installation Instructions ZL-RTB50
HAZARD WARNING
A. THIS EQUIPMENT IS SUITAB E FOR USE IN C ASS I, DIVISION
2/ZONE 2, GROUPS A, B, C AND D OR NON-HAZARDOUS OCATIONS
ON Y.
B. WARNING – EXPLOSION HAZARD – SUBSTITUTION OF COMPO-
NENTS MAY IMPAIR SUITABI ITY FOR C ASS I, DIVISION 2/ZONE 2.
C. WARNING – EXPLOSION HAZARD – DO NOT CONNECT OR DIS-
CONNECT CONNECTORS OR OPERATE SWITCHES WHI E CIRCUIT
IS IVE UN ESS THE AREA IS KNOWN TO BE NON-HAZARDOUS.
D. A MODU ES USED WITH ACCESSORIES MUST USE R/C (ECBT2)
MATING P UG FOR A APP ICAB E MODE S. A MATING P UGS
SHA HAVE SUITAB E RATINGS FOR DEVICE.
*Connecting cables are for internal wiring only.
**Use Class 2 power supply. Use conductors rated 60°/75°C.
