ZK Technology MA300 Bedienungsanleitung
MA300 User Manual
Version: 1.1
User Manual V1.1
2
About This Document:
This document introduces the operations of the access control device. For
the product installation, see related installation guide. For the software
operation, see the software user manual.
Notational Conventions:
This document includes such notational conventions as tips, important
notices and precautions. The notations contained in this manual include:
: Indicates important information, including precautions, which must be
read carefully to achieve the optimal equipment performance.
: Indicates the voice prompt generated by the device. In the event of
discrepancy between the voice prompts in this document and those
generated by the actual products, the latter shall prevail.
Table of Contents
I
Table of Contents
1. Instruction for Use ..................................................................... 1
1.1 Finger Placement................................................................. 1
1.2 Instruction for Card Swipe ................................................... 2
1.3 Precautions.......................................................................... 2
2. Introduction of Device................................................................ 3
2.1 Overview of Device Functions............................................. 3
2.2 Product Appearance ............................................................ 4
2.3 Use of an External USB Keyboard...................................... 6
2.4 Verification State .................................................................. 7
2.5 Management Card............................................................... 7
2.6 System Password................................................................ 8
2.7 Operation Timeout ............................................................... 9
3. Device Operations................................................................... 10
3.1 Management Card............................................................. 10
3.1.1 Enroll a Management Card..............................................10
3.1.2 Enroll an Ordinary User....................................................11
3.1.3 Delete a Single User.........................................................17
3.2 USB Keyboard Operations ................................................ 20
3.2.1 Set Keyboard Password ..................................................20
3.2.2 Enroll a User Through Keyboard ....................................21
3.2.3 Delete a Specified User....................................................25
3.2.4 Delete All Users.................................................................27
3.2.5 Restore Factory Defaults .................................................27
3.3 Access Control Function.................................................... 28
3.4 User Verification................................................................. 30
User Manual V1.1
II
3.5 U-disk................................................................................. 33
3.6 Tamper Switch ................................................................... 35
4. Appendix.................................................................................. 36
4.1 List of Parameters.............................................................. 36
4.2 Anti-Pass Back ★............................................................. 37
4.3 Statement on Human Rights and Privacy.......................... 40
4.4 Environment-Friendly Use Description.............................. 42
MA300 User Manual ZkTechnologyEU
1
1. Instruction for Use
1.1 Finger Placement
Recommended fingers: The index finger, middle finger or the ring finger; the
thumb and little finger are not recommended (because they are usually
clumsy on the fingerprint collection screen).
1. Proper finger placement:
2. Improper finger placement:
Slanting
Off-center
Not flat to the surface
Off-center
The finger is flat to the surface
and centered in fingered guide.
Please enroll and verify your fingerprint by using the proper finger
placement mode. We shall not be held accountable for any
consequences arising out of the degradation in verification
performance due to improper user operations. We shall reserve the
right of final interpretation and revision of this document.
User Manual V1.1
2
1.2 Instruction for Card Swipe
Integrated with a non-contact RF card reader module, this device supports
the ID cards and MIFARE cards (optional and only used as ID cards). By
offering multiple verification modes such as fingerprint, RF card and
fingerprint + RF card verification, this device can accommodate to diversified
user needs.
Swipe your card across the sensor area after the voice prompt and remove
your card after the device has sensed it. For the swipe area, see 2.2 Product
Appearance.
1.3 Precautions
Protect the device from exposure to direct sunlight or strong beam as strong
beam greatly affects the fingerprint collection and leads to fingerprint
verification failure.
It is recommended to use the device under a temperature of 0–50°C so as to
achieve the optimal performance. In the event of exposure of the device to
the outdoors for long periods of time, it is recommended to adopt sunshade
and heat dissipation facilities because excessively high or low temperature
may slow down the device operation and result in high false rejection rate
(FRR) and false acceptance rate (FAR).
When installing the device, please connect the power cable after connecting
other cables. If the device does not operate properly, be sure to shut down
the power supply before performing necessary inspection. Note that any
live-line working may cause damage to the device and the device damage
arising out of live-line working falls beyond the scope of our normal warranty.
For matters that are not covered in this document, please refer to related
materials including the installation guide, access control software user
manual.
MA300 User Manual ZkTechnologyEU
3
2. Introduction of Device
2.1 Overview of Device Functions
As an integrated fingerprint & access control device, our product can be
connected with either an electronic lock or an access controller. This device
features simple and flexible operations and supports the use of management
cards. With a management card, you can perform such functions as offline
enrollment, deletion and U-disk management. The voice prompts will guide
you through all the operations without screen display. This device allows you
to connect an external keyboard and offers multiple operation modes. It
supports access control function for a security management. It is supports
multiple communication modes. The U-disk features simple and convenient
operations. The waterproof design and metal case of the device allow it to
withstand a heavy impact without damage.
Featuring a compact and simple design, this device allows users to connect
several devices through a PC and perform real-time monitoring.
User Manual V1.1
4
LED Indicator
Swipe Card Area
FP Sensor
2.2 Product Appearance
Front view:
LED indicator: The LED indicator is used to display device operation
results and exceptional statuses which are defined as follows:
Common rules: If an operation succeeds, the green indicator is solid on for
one second; otherwise, the red indicator is solid on for one second.
Enrollment state: The green LED blinks three times every other three
second.
Single user deletion: The red LED blinks three times every other three
second.
Verification state: The green LED blinks once every other two second.
Card Swipe area: Refers to the area in the red dashed-line box as
shown in the figure above.
Fingerprint sensor: Used to collect and match fingerprints and delete
users.
MA300 User Manual ZKTechnology EU
5
Wiring terminals
TCP/IP Interface
Tamper Switch
DIP Switch
USB Interface
Reset Button
Speaker
Bottom view:
USB interface: Used to connect with a U-disk or a keyboard.
Reset button: Used to restart the device.
Speaker: Used to play the BEEP sound and voice prompts. If a user
passes the verification, the speaker beeps once; if the user fails to pass the
verification, the speaker beeps twice. The default prompts during operation:
beep + voice prompts.
Rear view:
Wiring Terminal: Connects with locks and power supply through
cables.
TCP/IP Interface: The TCP/IP interface connects with a PC through a
network cable (for detailed connection, see the installation guide).
User Manual V1.1
6
Shift Key
Operational Notation
Backspace
Enter key
Number keys 0-9
Tamper Switch: Used to generate a tamper alarm. For details, see 3.6
Tamper Switch.
DIP Switch: The DIP switch has four pins numbered 1, 2, 3 and 4. In
the RS485 communication mode, the first 1, 2 and 3 pins are used to set
hardware device number and the fourth pin is used to select the status of
terminal resistance. For detailed settings, see the installation guide.
2.3 Use of an External USB Keyboard
To facilitate device operations, you can connect the device with an external
USB keyboard (purchased by users) and conveniently perform such
operations as user enrollment, deletion and restoring factory defaults,
especially when specifying user IDs during user enrollment and deletion
.
An external USB keyboard is shown above (please refer to the actual
product):
NumLock is a numeric keypad toggle key. It is activated by default. If it is
Inhaltsverzeichnis
Andere ZK Technology Touch-Terminal Handbücher
Beliebte Touch-Terminal Handbücher anderer Marken
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung
Ingenico
Ingenico AXIUM EX4000 Bedienungsanleitung
Heisei Electronics
Heisei Electronics Q-POS 815 Bedienungsanleitung
Amano
Amano MTX-15 Bedienungsanleitung
FLOWBIRD
FLOWBIRD CWT Compact Touch Bedienungsanleitung
Demco
Demco SP7 Bedienungsanleitung
Motorola
Motorola MTP850 Bedienungsanleitung
YASKAWA
YASKAWA 62H-MDC0 Bedienungsanleitung
MVG industries
MVG industries NeptuLink Bedienungsanleitung
Price Industries Limited
Price Industries Limited FDC Gebrauchsanweisung
Honeywell
Honeywell TemaKey Bedienungsanleitung
EBN
EBN BPC65-B-A16G Bedienungsanleitung