Zoom V6 Bedienungsanleitung

You must read the Usage and Safety Precautions before use.

Operation Manual

Vocal Processor

Copying or reprinting this manual in part or in whole without permission is prohibited.

Product names, registered trademarks and company names in this document are the property of their respective companies. All trademarks and regis-

tered trademarks in this document are for identification purposes only and are not intended to infringe on the copyrights of their respective owners.

Proper display is not possible on grayscale devices.

■Operation Manual overview

You might need this manual in the future. Always keep it in a place where you can access it easily.

The contents of this document and the specications of the product could be changed without notice.

• Windows®is a trademark or registered trademark of Microsoft®Corporation.

• Mac and macOS are trademarks or registered trademarks of Apple Inc.

• iOS is a trademark or registered trademark of Cisco Systems, Inc. and used under license.

• Other product names, registered trademarks and company names in this document are the property of

their respective companies.

Note: All trademarks and registered trademarks in this document are for identication purposes only and

are not intended to infringe on the copyrights of their respective owners.



Introduction

Thank you very much for purchasing a ZOOM Vocal Processor.

The has numerous functions for transforming vocals and is easy-to-use, so anyone can achieve powerful

vocal sounds. After adjusting volume and clarity, you can, for example, correct the pitch of vocals while adding

harmony and reverb.

Setting values and combinations can be saved as patch memories in the unit to be used whenever you like.

You can try out a variety of vocal effects right away by switching among the preset patch memories.

With other features that include a unique formant pedal that can be used to change vocal characteristics, a

looper that can record overdubs for up to 3.5 minutes and a super-directional ZOOM SGV-6 mic, this vocal pro-

cessor is perfect for live performances.

We hope you will enjoy using it for many years.

Main features of the

Easy sound creation

Creating sounds is as easy as turning knobs and pressing switches.

Super-directional ZOOM SGV-6 mic

The super-directional ZOOM SGV-6 mic, which is based on shotgun mic technologies, catches the sound

of the vocalist with focused directionality. Using the SGV-6 suppresses feedback and interference from

nearby instruments when capturing a voice, enabling more accurate pitch correction and harmonization.

Voice character manipulation pedal

The FORMANT pedal can be used to change vocal characteristics without changing pitch, making it sound like

the voice of a different person.

The vocal automatically returns to its original character when the foot is removed from the pedal.

Singing assistance

Using the compressor to even out volume and the enhance function to add clarity helps make singing easier.

Voice, harmony and effect sections

The VOICE section allows you to easily pitch-correct vocals or create a robotic sound, for example.

The HARMONY section can be used to automatically generate third-degree and fth-degree harmonies accord-

ing to the KEY setting.

The EFFECT section is optimized for vocalists. The 10 types of effects include echo and reverb as well as ag-

gressive distortion.

3.5-minute looper great for improvisations

The looper can be used to overdub processed vocals as many times as desired, greatly expanding perfor-

mance possibilities.

Convenient undo and redo functions can be easily performed with a footswitch.

USB audio interface

The can be used as a 2-IN/2-OUT audio interface.

Terms used in this manual

Patch memory

Records of voice, harmony and effect settings are called “patch memories” and can be used to easily re-

call settings. Up to 100 patch memories can be stored.

Looper

Vocal loops can be recorded for up to 3.5 minutes and played back.

Loops can be layered for a variety of live performance techniques, including a cappella choruses and vo-

cal percussion.

Memory mode

Use this mode to select patch memories with the footswitches.

Looper mode

Use this mode to operate the looper with the footswitches.

VOICE

This section can alter the sound of the voice. For example, use it to correct pitch according to the key or

give the voice a childlike, synthesized or vocoder sound.

HARMONY

This can add up to two harmonizing voices.This generates optimal harmonies automatically according to

the key.

EFFECT

This section adds reverb, distortion or another effect to the original sound to change its tone.

FORMANT

Formants are vocal characteristics created by differences in mouth and throat shapes.

The FORMANT pedal of the can be used to change vocal characteristics without changing the pitch.

COMP (compressor)

Input sounds over a certain level can be compressed to lower their volume and even out the overall vol-

ume.

ENHANCE

This can make singing clearer by emphasizing high frequencies, and it can make the voice sound pleas-

anter by suppressing sibilant sounds as in “hiss” and “shhh”.

ECO mode

This function will automatically turn the power off 10 hours after the last operation.

Introduction �� 3

Terms used in this manual �� 4

Contents �� 5

structure�� 6

Names and functions of parts �� 7

Making connections �� 10

ZOOM SGV-6 mic overview�� 11

Turning the power on �� 12

Using batteries �� 13

Adjusting the volume and tone �� 14

Adjusting the mic input volume�� 14

Reducing volume variation (compressor func-

tion) �� 14

Bringing out vocal character (enhance function)

�� 15

Adjusting headphone volume�� 15

Selecting patch memories �� 16

Using the VOICE section �� 17

Using the HARMONY section�� 19

Using the EFFECT section �� 21

Saving settings in patch memories �� 23

Using the FORMANT pedal �� 24

Adjusting the stiffness of the FORMANT pedal24

Using the looper�� 25

Activating the looper�� 25

Recording and playing loops �� 25

Overdubbing loops �� 26

Clearing the loop �� 27

Display indicators �� 27

Bypassing the effect of the �� 28

Making other settings �� 29

Setting the standard pitch for voices and harmo-

nies�� 29

Setting the type of batteries used �� 30

Setting ECO mode to turn the power off auto-

matically when not used �� 31

Restoring factory default settings �� 32

Using audio interface functions �� 33

Installing the driver �� 33

Connecting to a computer �� 34

Updating the rmware �� 35

Troubleshooting �� 36

Specications �� 38

Contents

structure

■Signal ow

USB Audio

INPUT

OUTPUT

PA system

Headphones

Computer

Clip LED

Looper

Bypass

Settings saved in patch memories

Voice

Formant

Harmony

EffectVolume

Compressor

Enhance

The volume and tone of the input from the mic can be adjusted.

( “Adjusting the volume and tone” on page 14)

This can alter vocals with pitch correction, pitch shifting, vocoder and other options.

( “Using the VOICE section” on page 17)

The FORMANT pedal can be used to change vocal characteristics without changing the pitch.

( “Using the FORMANT pedal” on page 24)

This can add up to two harmonizing voices.

( “Using the HARMONY section” on page 19)

Use this to apply delay, reverb or another effect.

( “Using the EFFECT section” on page 21)

Recorded loops can be played back repeatedly.

( “Using the looper” on page 25)

HINT

VOICE, HARMONY and EFFECT settings ( , and ) can be saved in patch memories and easily re-

called. (“Selecting patch memories” on page 16, “Saving settings in patch memories” on

page 23)

Names and functions of parts

■Front panel

❶ ❷ ❺❸ ❹ ❻ ❼

❽ ❾

VOICE section

Alter vocals with pitch correction, pitch shifting, vocoder and other options.

VOICE ADJUST knob

Use to adjust the voice.

VOICE selection knob

Select the voice type.

KEY selection knob

Select the key for pitch correction.

VOICE indicator

This shows whether the VOICE section is on or off.

VOICE footswitch

Turn the VOICE section on/off.

HARMONY section

Add up to two harmonizing voices.

KEY selection knob

Select the key for harmonization.

HARMONY style buttons

Press to activate harmony types.

HARMONY MIX knob

Adjust the balance between the vocal and the harmony.

HARMONY footswitch

Turn the HARMONY section on/off.

HARMONY indicator

This shows whether the HARMONY section is on or off.

Display

This shows the selected patch memory number and looper status.

STORE button

Press to save the current settings to a patch memory.

Input control section

Adjust the volume and tone of the input from the mic.

ENHANCE button

Turn the ENHANCE function on/off.

COMP knob

Adjust the amount of compression.

VOLUME knob

Adjust the mic input volume.

CLIP indicator

This shows the status of the input sound.

POWER indicator

This shows whether the power is on or off and the remaining battery charge.

FORMANT pedal

Change the character of the voice.

Patch memory/looper control section

Select patch memories and operate the looper.

MEMORY/LOOPER footswitch

Switch between memory and looper modes.

Press and hold to bypass the effect of the .

MEMORY footswitch

Use to select patch memories.

When in looper mode, use to record and play loops.

MEMORY footswitch

Use to select patch memories.

When in looper mode, use to stop loops.

EFFECT section

Apply delay, reverb or another effect.

EFFECT selection knob

Select the effect.

EFFECT ADJUST knob

Adjust the effect.

EFFECT indicator

This shows whether the EFFECT section is on or off.

EFFECT footswitch

Turn the EFFECT section on/off.

■Rear panel

❶ ❷ ❺❸❹ ❻ ❼❽ ❾ 󱢳

MIC IN jack

Connect a mic here.

2: HOT 1: GND

3: COLD

PHANTOM switch

Turn +48V phantom power ON/OFF.

Turn this ON when connecting a ZOOM SGV-6 mic or a condenser mic that requires phantom power,

for example.

EFFECT CONTROL connector

An expression pedal (ZOOM FP02M) can be connected here to control the effect.

USB port

Connect a computer here to use the as an audio interface or to update the rmware.

A mobile battery, for example, can also be connected here to provide power.

PHONES output jack

Connect headphones here.

PHONES output volume knob

Adjust the headphone output volume.

GROUND LIFT switch

This connects/disconnects the output jack ground.

OUTPUT jack

Connect this to a mixer, other PA system, recorder or other audio device that can adjust sound bal-

ance.

1: GND 2: HOT

3: COLD

POWER switch

Turn the power on/off.

DC 9V AC adapter connector

Connect a dedicated AC adapter (ZOOM AD-16) here.

Making connections

Computer

AC adapter (ZOOM

AD-16)

Stereo mini plug

headphones

Mic (ZOOM SGV-6 or

commercially-avail-

able mic)

Expression pedal (ZOOM

FP02M)

Connected to the EFFECT

CONTROL jack, the pedal

can be used to control the

effect.

Mixer, PA system, recorder,

etc.

When connecting a

ZOOM SGV-6, condens-

er mic or other device

that requires phantom

power, set the PHAN-

TOM switch to ON.

This connects/disconnects the out-

put jack ground.

• CONNECT:The grounding pin is

connected to the ground.

• LIFT:The grounding pin is discon-

nected from the ground.This is

effective if noise is caused by a

ground loop.

Connect a cable with an XLR connector

(female) to the OUTPUT jack.

Use a cable with a connector that suits

the PA system or recorder input jack.

The output is line level.

Connect it to a line input jack on the other

equipment.

Use a mic cable to

connect it to the MIC

IN jack.

Use a Micro USB ca-

ble to connect to the

USB port.

NOTE

Always set the PHANTOM switch to OFF when connecting a device that does not support phantom pow-

er. The device could be damaged if this is not done.

Andere Handbücher für V6

Inhaltsverzeichnis

Andere Zoom Aufnahmegeräte Handbücher

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch