Zte Blade A52 Lite Bedienungsanleitung
ZTE
ZTE Blade A52 Lite
Quick Start Guide
LEGAL INFORMATION
Copyright © 2022 ZTE CORPORATION.
All rights reserved.
No part of this publication may be quoted,
reproduced, translated or used in any form or by any
means, electronic or mechanical, including
photocopying and microfilm, without the prior written
permission of ZTE Corporation.
Notice
ZTE Corporation reserves the right to make
modifications on print errors or update specifications
in this guide without prior notice.
We offer self-service for our smart terminal device
users. Please visit the ZTE official website (at
www.ztedevices.com) for more information on user
manual, self-service and supported product models.
Information on the website takes precedence.
Disclaimer
ZTE Corporation expressly disclaims any liability for
faults and damages caused by unauthorized
modifications of the software.
Images and screenshots used in this guide may
differ from the actual product. Content in this guide
may differ from the actual product or software.
Trademarks
ZTE and the ZTE logos are trademarks of ZTE
Corporation.
Android™ is a trademark of Google LLC.
The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and
any use of such marks by ZTE Corporation is under
license.
microSDXC Logo is a trademark of SD-3C,
LLC.
Other trademarks and trade names are those of their
respective owners.
1
Getting to Know Your Phone
Front camara
Touch screen
Earpiece
Volume key
Power key
Charging/
micro-USB jack
Headset jack
Back cameras
Speaker
Flash
nano-SIM/
microSDXC
card tray
2
Setting Up Your Phone
The nano-SIM card(s) can be installed or removed
while the phone is turned on.
WARNING!
To avoid damage to the phone, do not use any other
kind of SIM cards, or any non-standard nano-SIM
card cut from a SIM card. You can get a standard
nano-SIM card from your service provider.
1. Insert the tip of the tray eject tool into the hole on
the card tray.
CAUTION:
Never replace the included tray eject tool with sharp
objects. Ensure that the tray eject tool is
perpendicular to the hole. Otherwise, the phone may
be damaged.
2. Pull out the card tray and place the nano-SIM card
and the microSDXC card (optional) on the tray, as
shown. Carefully slide the tray back into place.
micro SDXC
card
Single-SIM model Dual-SIM model
nano-SIM
card 1 nano-SIM
card 2
(optional)
3
NOTE:
The dual-SIM model is not available in every country.
Consult your supplier for more information.
Charging the Phone
Your phone’s battery should have enough power for
the phone to turn on, find a signal, and make a few
calls. You should fully charge the battery as soon as
possible.
WARNING!
Use only ZTE-approved chargers and USB cables.
The use of unapproved accessories could damage
your phone or cause the battery to explode.
WARNING!
Do not remove the back cover. The battery is not
removable. Removal may cause fire or explosion.
1. Connect the adapter to the charging jack. Ensure
that the adapter is inserted in the correct direction.
2. Connect the charger to a standard AC power
outlet.
3. Disconnect the charger when the battery is fully
charged.
4
Powering On/Off Your Phone
Make sure the battery is charged before powering
on.
·Press and hold the Power key to turn on your
phone.
·To power off, press and hold the Power key to
open the options menu, and touch .
NOTE:
If the screen freezes or takes too long to respond, try
pressing and holding the Power key for over 10
seconds to restart the phone.
Waking Up Your Phone
Your phone automatically goes into sleep mode when
it is not in use for some time. The display is turned off
to save power and the keys are locked to prevent
accidental operations.
You can wake up your phone by turning on the
display and unlocking the keys.
1. Press the Power key to turn the screen on.
2. Swipe up on the screen.
NOTE:
If you have set an unlock pattern, a PIN or a
password for your phone, you'll need to draw the
pattern, or enter the PIN/password to unlock your
screen.
If the battery is extremely low, you may be unable
to power on the phone even when it is being
charged. In this case, try again after charging the
phone for at least 20 minutes.
Contact the customer service if you still cannot
power on the phone after prolonged charging.
NOTE:
·
·
5
FM Radio
Scanning for Channels
1. Plug in a wired headset and open FM Radio.
2. Touch Radio Stations > . Your phone scans for
all available channels and saves them to the
channel list.
Listening to FM Radio
1. Open FM Radio while the headset is connected.
2. Touch Radio Stations and select a channel.
You can also drag the white button along the
frequency panel or touch or to switch to other
channels.
NOTE:
·Touch to add the channel to favorites.
·Touch to listen to the radio through the phone
speaker.
·The FM radio feature does not require an Internet
connection.
6
Product Safety Information
Don't make or receive phone calls while
driving. Never text while driving.
Keep your phone at least 10 mm away from
your body while making calls.
Small parts may cause choking.
Your phone can produce a loud sound.
To prevent possible hearing damage, do not
listen at high volume levels for long periods.
Exercise caution when holding your phone
near your ear while the loudspeaker is in
use.
Avoid contact with anything magnetic.
Keep away from pacemakers and other
electronic medical devices.
Turn off when told to on aircraft and at
airports.
Turn off when near explosive materials or
liquids.
Don't use at gas stations.
Turn off when asked to in hospitals and
medical facilities.
Your phone may produce a bright or
flashing light.
Don't dispose of your phone in fire.
Avoid extreme temperatures.
7
Avoid contact with liquids. Keep your phone
dry.
Do not attempt to disassemble your phone.
Only use approved accessories.
Don't rely on your phone as a primary
device for emergency communications.
For pluggable equipment, the socket-outlet
shall be installed near the equipment and
shall be easily accessible.
8
FCC RF EXPOSURE
INFORMATION (SAR)
This phone is designed and manufactured not
to exceed the emission limits for exposure to
radio frequency (RF) energy set by the Federal
Communications Commission of the United
States.
During SAR testing, this device was set to
transmit at its highest certified power level in all
tested frequency bands, and placed in
positions that simulate RF exposure in usage
against the head with no separation, and near
the body with the separation of 10mm.
Although the SAR is determined at the highest
certified power level, the actual SAR level of
the device while operating can be well below
the maximum value. This is because the phone
is designed to operate at multiple power levels
so as to use only the power required to reach
the network. In general, the closer you are to a
wireless base station antenna, the lower the
power output.
The exposure standard for wireless devices
employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR
limit set by the FCC is 1.6 W/kg.
This device is complied with SAR for general
population/uncontrolled exposure limits in
ANSI/IEEE C95.1-1992 and had been tested in
accordance with the measurement methods
and procedures specified in IEEE1528.
The FCC has granted an Equipment
Authorization for this model phone with all
9
Andere Handbücher für Blade A52 Lite
1
Inhaltsverzeichnis
Andere Zte Handy Handbücher
Zte
Zte V768 Bedienungsanleitung
Zte
Zte ZTEC370 Bedienungsanleitung
Zte
Zte V821 Bedienungsanleitung
Zte
Zte GRAND S FLEX Bedienungsanleitung
Zte
Zte Acqua Bedienungsanleitung
Zte
Zte Avid 559 Bedienungsanleitung
Zte
Zte GRAND X Plus Bedienungsanleitung
Zte
Zte N986 Bedienungsanleitung
Zte
Zte V818 Bedienungsanleitung
Zte
Zte C R750+ Bedienungsanleitung
Zte
Zte Axon 30 Bedienungsanleitung
Zte
Zte Avid 916 Bedienungsanleitung
Zte
Zte P16 Bedienungsanleitung
Zte
Zte Blade A506 Bedienungsanleitung
Zte
Zte F116 Series Bedienungsanleitung
Zte
Zte -G R260 Bedienungsanleitung
Zte
Zte ZMAX Bedienungsanleitung
Zte
Zte Sonata 4G Bedienungsanleitung
Zte
Zte BLADE X1 5g Bedienungsanleitung
Zte
Zte Get Started Bedienungsanleitung
