Zte Blade A72 Bedienungsanleitung

Quick Start Guide

Quick Start Guide (en)…………………….………2

Kurzanleitung (de)…………………………………15

Ghid rapid (ro) …………………..………….…….28

Vodičza brzi početak (sr) …….….……..……….41

Skrócona instrukcja obsługi (pl) ……..…………54

Kratke upute (hr) .....…....….….….….……….….67

Οδηγός γρήγορης εκκίνησης (el) ……….………80

Rövid üzembe helyezési útmutató (hu) …..……93

Stručný návod na obsluhu (sk) ……..…….……106

Stručný návod k použití (cs) …….…….………119

Ръководство за бърз старт (bg) ….…….……132

Краток водич за користење (mk) ……………145

Priročnik za hitro nastavitev (sl) ….….….……158

Vodičza brzi početak (bs) ………….………….171

ZTE Blade A72

Quick Start Guide

LEGAL INFORMATION

No part of this publication may be quoted, reproduced,

translated or used in any form or by any means,

electronic or mechanical, including photocopying and

microfilm, without the prior written permission of ZTE

Corporation.

Notice

ZTE Corporation reserves the right to make

modifications on print errors or update specifications in

this guide without prior notice.

We offer self-service for our smart terminal device users.

Please visit the ZTE official website (at

www.ztedevices.com) for more information on user

manual, self-service and supported product models.

Information on the website takes precedence.

Disclaimer

ZTE Corporation expressly disclaims any liability for

faults and damages caused by unauthorized

modifications of the software.

Images and screenshots used in this guide may differ

from the actual product. Content in this guide may differ

from the actual product or software.

Trademarks

ZTE and the ZTE logos are trademarks of ZTE

Corporation.

Android™ is a trademark of Google LLC.

The Bluetooth®word mark and logos are registered

trademarks owned by the Bluetooth SIG, Inc. and any

use of such marks by ZTE Corporation is under license.

microSDXC Logo is a trademark of SD-3C,

LLC.

Other trademarks and trade names are those of their

respective owners.

Getting to Know Your Phone

Your phone supports 2.4 GHz and 5 GHz Wi-Fi.

Front camera

Touch screen

Earpiece

Volume ke

Power key/

Fingerprint

sensor

Charging/USB

Type-C jack

Headset jack

Back cameras

and flash

Speaker

Indicator light

nano-SIM/

microSDXC

card tray

Proximity &

light sensor

Setting Up Your Phone

The nano-SIM card(s) can be installed or removed while

the phone is turned on.

WARNING!

To avoid damage to the phone, do not use any other kind

of SIM cards, or any non-standard nano-SIM card cut

from a SIM card. You can get a standard nano-SIM card

from your service provider.

1. Insert the tip of the tray eject tool into the hole on the

card tray.

NOTE:

Please use the tray eject tool included in the box.

Otherwise the card tray may not be ejected.

CAUTION:

Never replace the included tray eject tool with sharp

objects. Ensure that the tray eject tool is perpendicular to

the hole. Otherwise, the phone may be damaged.

2. Pull out the card tray. You can place the nano-SIM

cards on the right and middle card slots, and place a

microSDXC card (optional) on the left card slot, as

shown. Carefully slide the tray back into place.

NOTE:

If two nano-SIM cards are installed, both cards can

connect to the 4G, 3G, or 2G network, and either card

can be used for mobile data.

Charging the Phone

Your phone’s battery should have enough power for the

phone to turn on, find a signal, and make a few calls. You

should fully charge the battery as soon as possible.

WARNING!

Use only ZTE-approved chargers and USB Type-C

cables. The use of unapproved accessories could

damage your phone or cause the battery to explode.

WARNING!

Do not remove the back cover. The battery is not

removable. Removal may cause fire or explosion.

1. Connect the adapter to the charging jack.

2. Connect the charger to a standard AC power outlet.

3. Disconnect the charger when the battery is fully

charged.

NOTE:

If the battery is extremely low, you may be unable to

power on the phone even when it is being charged. In

this case, try again after charging the phone for at least

20 minutes. Contact the customer service if you still

cannot power on the phone after prolonged charging.

Powering On/Off Your Phone

Make sure the battery is charged before powering on.

Press and hold the Power key to turn on your

phone.

To power off, press and hold the Power key to open

the options menu, and touch >.

NOTE:

If the screen freezes or takes too long to respond, try

pressing and holding the Power key for over 10 seconds

to restart the phone.

Waking Up Your Phone

Your phone automatically goes into sleep mode when it

is not in use for some time. The display is turned off to

save power and the keys are locked to prevent

accidental operations.

You can wake up your phone by turning on the display

and unlocking the keys.

1. Press the Power key to turn the screen on.

2. Swipe up on the screen.

NOTE:

If you have set a face verification, a fingerprint, an unlock

pattern, a PIN or a password for your phone, you’ll need

to use your face or fingerprint, draw the pattern, or enter

the PIN/password to unlock your screen.

Inhaltsverzeichnis

Andere Zte Handy Handbücher

Beliebte Handy Handbücher anderer Marken

Nokia

Nokia Lumia 620 Bedienungsanleitung

Blackbe;rry

Blackbe;rry KEYone Bedienungsanleitung

Bea-fon

Bea-fon X5 Premium Bedienungsanleitung

Blackbe;rry

Blackbe;rry 8707 Series Bedienungsanleitung

Blackbe;rry

Blackbe;rry Storm Betriebsanleitung

LG LM-X420QN Bedienungsanleitung

LifeWatch

LifeWatch V Bedienungsanleitung

Bea-fon

Bea-fon SILVER LINE SL860 Bedienungsanleitung

IKI Mobile

IKI Mobile KF4.5i Bedienungsanleitung

Hitech

Hitech HT-850 Bedienungsanleitung

Yezz

Yezz Fashion F10 Bedienungsanleitung

Point Mobile

Point Mobile PM60 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Q10 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Bold 9900 Bedienungsanleitung

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Bedienungsanleitung

LG LM-K420EMW Bedienungsanleitung

ISAFE MOBILE

ISAFE MOBILE IS655.2 Bedienungsanleitung

LG Thrive Bedienungsanleitung