Zte Tata Docomo Bedienungsanleitung
Tata Docomo 3G Wi-Fi HUB (ZTE AC30)
User Guide
LEGAL INFORMATION
Copyright © 2010 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without the prior
written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modifications on print
errors or update specifications without prior notice.
Version No. : R1.0
Introduction
ZTE AC30 is a 2G/3G Wi-Fi device, working in GSM/GPRS/EDGE/WCDMA/EV-DO/HSPA network.
The client devices could connect to it via USB or Wi-Fi interface. The device supports data and SMS
services, enabling you to communicate anytime and anywhere.
This quick guide provides instructions on how to install and get started with the product. For information
about connection of services, please consult your service provider.
3G WI-FI HUB Quick Guide
Specification
Data Service HSPA: DL 7.2Mbps; UL 5.76Mbps
EV-DO: DL 3.1Mbps; UL 1.8Mbps
WCDMA CS: 64Kbps UL/DL
WCDMA PS: 384Kbps UL/DL
Interface USB and Wi-Fi
Wi-Fi Standard 802.11b/g
Wi-Fi Security WEP/WPA/WPA2
USB Version USB 2.0 HIGH SPEED
USB Interface Type Mini USB-B
Weight 80g
Dimensions (W×H×D): 99.7mm*53.7mm*13.9mm
Power Adapter 5V/700mA
Battery capacity 1500mAh
*Standby time About 100hours
*Working time About 4hours
Operating system Windows 7, Windows Vista(32bit or 64bit), Windows XP (SP3 or later), MAC(10.4 or
later)
Without Wi-Fi, Internet surfing with the USB connection is only available for the
Windows and MAC OS.
Web Browser IE (7.0 or later), Firefox (3.0 or later), Opera (10.0 or later), Safari (4.0 or later), Chrome
(5.0 or later)
Operating temperature -10℃~ +60℃
Storage temperature -20℃~ +50℃
Charging temperature 0℃~ +45℃
Humidity 5%~ 95%
Notes:
The standby and working time are only for your reference. They are based on the ideal working
environment.
3G Wi-Fi HUB Quick Guide
3
Getting to Know Your Device
The following figure shows the appearance of the device, it is only for your reference. The actual device
may be different.
Interface and Buttons
1.Power Press and hold the button to switch on/off the
device.
Press the button 10 times continuously to
restore the device to the factory default
settings.
2.Charger/USB port Charge your device.
Connect the client to your device via USB
cable.
LED Indicator
It indicates the status of your device.
When the device is powered on:
Indicator Status Description
Battery indication Red blinking Please charge the battery
Red solid Voltage of battery is low
Green blinking Charging
Green solid Voltage of battery is
full(Charging completed)
Signal strength indication Red solid ERROR or NO signal or NO
network service
Green blinking Signal is ok
3G WI-FI HUB Quick Guide
Indicator Status Description
Green solid Signal is good
Wi-Fi indication Green blinking Wi-Fi is active
LED off Wi-Fi is inactive
Network indication Red blinking 2G / 1x Modem data transferring
Red solid Register on 2G/ 1x network
Green blinking 3G/HSIA Modem data
transferring
Green solid Register on 3G/HSIA network
When the device is powered off and charging:
Indicator Status Description
Battery indication Green blinking Charging
LED off Voltage of battery is
full(Charging complete)
3G Wi-Fi HUB Quick Guide
5
Hardware Installation
Inserting (U)SIM Card and Battery
1. Use the thumb catch at the bottom of the device to open the battery cover.
2. Insert the (U)SIM card into the (U)SIM card holder.
3. Insert the battery as shown with the contacts located against the metal springs, and press the battery
down into the case.
4. Line the battery cover up correctly and press gently to close the case.
3G WI-FI HUB Quick Guide
Switching On/Off Your Device
Hold the Power button to switch on/off the device.
Notes:
The device is powered on when the signal strength indication lights up.
Charging Your Device
You can charge your device by using USB cable or adapter.
1. Insert the charger lead carefully with the plug arrow facing the bottom of the device.
2. The plug only fits one way. Do not use excessive force to insert the plug.
3. Make sure the plug is lined up correctly and inserted gently.
3G Wi-Fi HUB Quick Guide
7
Working Mode
Your device supports three working modes. We only use PC or laptop as the example in this document.
USB Mode: Connect to the device with the USB cable.
Wi-Fi Mode: Connect to the device via Wi-Fi.
Mixed Mode: Connect to the device with the above two connection methods.
Notes:
If you want to connect to the Internet by using Wi-Fi mode, make sure that the client supports the Wi-Fi
function.
The following picture is the application example. All of the client devices can surf on the Internet at the
same time.
3G WI-FI HUB Quick Guide
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Zte WLAN-Router Handbücher
Zte
Zte ZXV10 W300 Bedienungs- und Wartungsanleitung
Zte
Zte MF985U Bedienungsanleitung
Zte
Zte Z288L Bedienungsanleitung
Zte
Zte Z291DL Bedienungsanleitung
Zte
Zte MC801A Bedienungsanleitung
Zte
Zte Z6200 Bedienungsanleitung
Zte
Zte MF62 Einrichtungshandbuch
Zte
Zte MF10 Bedienungsanleitung
Zte
Zte MF910 Bedienungsanleitung
Zte
Zte MF60 Bedienungsanleitung
Zte
Zte A004ZT Bedienungsanleitung
Zte
Zte Z079584505806 Bedienungsanleitung
Zte
Zte OPTUS MF920V Bedienungsanleitung
Zte
Zte MF971V Bedienungsanleitung
Zte
Zte MF63 Bedienungsanleitung
Zte
Zte MF23 Bedienungsanleitung
Zte
Zte MF970 Bedienungsanleitung
Zte
Zte R226 Bedienungsanleitung
Zte
Zte Unite II Bedienungsanleitung
Zte
Zte R218z Technisches Datenblatt
