Zypcom Z34-SC Bedienungsanleitung
Zypcom
Data/Fax/Voice Modems
User’s Guide
Z34-SC
Z34-PC
Part number: 18008-509D
November 1997
ii
Z
Copyright 1997 by Zypcom, Inc.
Document No. 18008-509D
November 1997
This manual is published by Zypcom, Inc. who reserves the right to
make changes and improvements in the product(s) at any time.
Zypcom also reserves the right to revise this manual at any time and
without notice.
All rights reserved. No part of this publication may be transcribed,
reproduced, or stored in electronic media, translated into any
language or computer code, or be transmitted in any form whatsoever
without the prior consent of Zypcom, Inc.
All versions, titles, trademarks, compatibility claims, etc. of hardware
and software products mentioned in this publication are the sole
responsibility and property of the respective vendors. Zypcom makes
no endorsement of any vendor’s product, nor claims responsibility for
the operation and accuracy of said product.
____________________________________________________________
Zypcom, SE-Series, SX-Series, C-Series, L-Series, Z32-Series, Z34-
Series, Z32, Z34, Z32b-SE, Z32t-SE, Z34-SE, Z32b-SX, Z32t-SX,
Z34-SX, Z34-SC, Z34-PC, Z34-SL, Z34-PL, Z32CH, Z32CH-2, Z32CH-
48, Z32CH-48-2, Z3200, Z3200E, and Zscript are trademarks of
Zypcom, Inc.
Carbon Copy and MNP are trademarks of Microcom, Inc.
Hayes is a trademark of Hayes Microcomputer Products, Inc.
IBM is a registered trademark of International Business Machines.
MS-DOS, Windows 3.1 and Windows 95 are registered trademarks of
Microsoft Corporation.
pcANYWHERE is a trademark of Symantec.
PROCOMM is a trademark of DataStorm Technologies, Inc.
QModem and QModem SST are trademarks of Mustang Software Inc.
UNIX is a registered trademark of Unix System Laboratories.
iii
Z
Contents
Chapter 1 Introduction
Description .............................................................. 1-1
Features .................................................................. 1-2
System Requirements .............................................. 1-3
Modes of Operation .................................................. 1-3
Modem Interface ...................................................... 1-7
Check List................................................................ 1-8
Chapter 2 Installation
Introduction............................................................. 2-1
Z34-PC COM Port & IRQ Settings or
Plug-and-Play Settings ............................................. 2-2
Hardware Installation Steps ..................................... 2-4
Additional Installation Information ........................... 2-7
Windows 95 Modem Setup for Z34-PC and
Z34-SC .................................................................... 2-8
Using HyperTerminal with Windows 95 .................. 2-12
Installation Problems ............................................. 2-13
Windows 95 IRQ Conflicts ...................................... 2-14
Using the Windows 95 Computer
Properties Screen ................................................... 2-15
Using SuperVoice Software With Your
Modem...................................................................2-17
Using Other Communication Software
With Your Modem .................................................. 2-19
iv
Z
Chapter 3 AT Commands
Introduction............................................................. 3-1
Functional Modem States......................................... 3-2
Basics of the AT Command Set................................. 3-4
AT Command Summary ........................................... 3-6
AT Command Descriptions .......................................3-7
AT Commands for Data Mode ................................... 3-9
Error Control and Compression Commands ........... 3-24
Chapter 4 Troubleshooting
General.................................................................... 4-1
Basic Communication Problems ............................... 4-2
Other Common Problems ......................................... 4-6
Other Frequently Encountered Problems ................ 4-15
Appendix A: Specifications.......................................................A-1
B: IS-101 Voice Command........................................B-1
C: Fax Commands....................................................C-1
D: Modem Terms..................................................... D-1
E: Removing Old Windows 95 Drivers.......................E-1
F: Downloading Firmware ........................................F-1
v
Z
About This Manual
Shown below is a chronological listing of revisions to
this manual. The revision sequence, date, and synopsis
of revised materials are included to provide the reader
with a comprehensive manual history.
REVISION NUMBER DATE DESCRIPTION
18008-507A 01/97 1st Edition
18008-509A 04/97 2nd Edition
18008-509B 04/97 3rd Edition
18008-509C 05/97 4th Edition
18008-509D 11/97 5th Edition
Zypcom welcomes your comments concerning this
manual. Although every effort has been made to keep it
free of errors, some do occasionally occur. When
reporting a specific problem or error, please describe it
briefly and include the manual name, the document
revision number, the paragraph or figure number, and
the page number.
Mail, phone in, or fax your comments to:
Zypcom, Inc.
2301 Industrial Parkway, Bldg. 7
Hayward, CA 94545
Phone: (510) 783-2501
Fax: (510) 783-2414
Printed in U.S.A.
vi
Z
Warranty and Limitation of Liability
Zypcom, Inc. warrants that its products will perform in
accordance with Zypcom’s published specifications (or
the specification agreed to, in writing, by the Buyer and
Zypcom, and made a part of the sales contract) for a
period of twenty-four (24) months from the date of
original shipment.
During this warranty period, Zypcom will repair any
equipment that it determines is defective. The Buyer
will return the defective equipment to Zypcom, and will
prepay transportation charges. A repair order (RO)
number must accompany all returned equipment (see
“Service Information” later in this section). Zypcom will
repair and return the equipment to the Buyer, and will
prepay transportation charges for destinations in the
continental United States.
This warranty shall not apply to damage resulting from
abuse, negligence, an accident, a natural disaster (flood,
earthquake, etc.), an act of nature (lightening, wind,
etc.), loss, or damage in transit. The warranty shall be
voided should the Buyer attempt any repairs or
alterations without prior written permission of Zypcom,
Inc.
ZYPCOM MAKES NO OTHER WARRANTY, EXPRESSED
OR IMPLIED, AND DISCLAIMS ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
vii
Z
THE BUYER AND ZYPCOM AGREE THAT THE SOLE AND
EXCLUSIVE REMEDIES FOR BREACH OF ANY WAR-
RANTY CONCERNING THE GOODS SHALL BE REPAIR
OR REPLACEMENT OF DEFECTIVE PARTS UPON THE
TERMS ABOVE DESCRIBED OR, AT ZYPCOM’S OPTION,
REFUND OF THE PURCHASE PRICE. ZYPCOM SHALL
NOT BE LIABLE FOR CONTINGENT OR CONSEQUENTIAL
DAMAGES TO PERSONS OR PROPERTY, AND ITS SOLE
LIABILITY IS AS SET FORTH ABOVE.
Any action by the Buyer for any alleged breach of the
warranty set forth herein shall be brought to the
attention of Zypcom, Inc. by the Buyer within the
warranty period, but not later than thirty (30) days after
the alleged breach.
THIS STATEMENT OF WARRANTY AND LIMITATION OF
LIABILITY IS A COMPLETE AND EXCLUSIVE STATEMENT
OF ALL WARRANTY AND LIABILITY REPRESENTATIONS
OF ZYPCOM, INC. It may not be varied, supplemented,
qualified or interpreted by any prior dealings between
the parties, by any usage of the trade, or upon the face
or reverse of any form to which this is attached or is a
part of, nor may it be modified by any agent, employee
or representative of Zypcom unless such modification or
representation is made in writing and signed by an
officer of Zypcom, Inc.
Repairs and/or replacements under the terms of this
warranty SHALL NOT EXTEND THE WARRANTY LIFE OF
THE ORIGINAL EQUIPMENT SUPPLIED. After this
warranty has expired, service can be purchased directly
from Zypcom, Inc.
viii
Z
Service Information
In the event of malfunction or other indication of
product failure, please follow this procedure:
1. Call Zypcom Technical Support at (510) 783-2501,
Monday through Friday from 8:00 A.M. to 5:00 P.M.
Pacific time (excluding holidays).
2. Your support representative will ask you to perform
a few easy tests. If the tests and other remedies do not
solve the problem, you will be issued a Repair Order
(RO) number.
3. Return the unit in the original box or similar
protective shipping container and send it prepaid to:
Repair Department
Reference: RO Number _______
Zypcom, Inc.
2301 Industrial Parkway West, Bldg. 7
Hayward, CA 94545
Please mark the shipping container on the outside with
the RO number and enclose a written description of the
problem with the defective unit.
Terms For warranty repair replacements, the customer pays
freight charges incurred for sending the defective
modem to Zypcom. Zypcom pays freight charges
(destinations in the continental United States only) for
sending replacement units. Replacements and/or
repairs are performed at no charge to the customer.
ix
Z
For non-warranty repairs, charges vary according to the
specific model of the modem being repaired. Repair
charges are estimated before an RO number is issued.
Customer prepays all freight and repair charges by
means of credit card or C.O.D. terms. Zypcom can
accept prepayment by company check.
FCC Part 15: Radio/Television Interference
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment on,
the user is encouraged to try to correct the interference
by one or more of the following measures:
qReorient or relocate the receiving antenna.
qIncrease the separation between the equipment
and the receiver.
qConnect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
qConsult the dealer or an experienced radio/TV
technician for help.
x
Z
CAUTION: Changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
CAUTION: Shielded interface cables, if any, must
be used in order to comply with emissions limits.
Part 68: Telephone Connection
This equipment complies with Part 68 of the FCC rules.
This equipment has a label that contains, among other
things, the FCC Registration Number and Ringer
Equivalence Number (REN). Upon request, provide the
above information to your telephone company.
The REN value is useful to determine the number of
devices that may be connected to your telephone line
and that will still ring when your telephone number is
called. In most areas, but not all, the sum of the RENs
of all the devices you may connect to one line should
not exceed five (5.0). To be certain of the number of
devices you may connect to your line, as determined by
the REN, you should contact your local telephone
company to determine the maximum REN for your
calling area.
If this equipment causes harm to the telephone network
equipment, the telephone company may discontinue
your service temporarily. If possible, they will notify you
in advance. However, if advance notification is not
possible, you will be notified as soon as possible. You
will be informed of your right to file a complaint with the
FCC.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Zypcom Modem Handbücher
Beliebte Modem Handbücher anderer Marken
Davicom
Davicom DM562AP Bedienungsanleitung
EpiValley
EpiValley TATA indicom SXC-1080 Bedienungsanleitung
Zte
Zte WiMAX Bedienungsanleitung
Intelimax
Intelimax MA-2060 Bedienungsanleitung
SMC Networks
SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch
Telstra
Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung
US Robotics
US Robotics 3453C Bedienungsanleitung
MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung
Zte
Zte MF823 Bedienungsanleitung
Four-Faith
Four-Faith F1403 Bedienungsanleitung
Sierra Wireless
Sierra Wireless AIRLINK MP595W Bedienungsanleitung
Gemtek
Gemtek WiMAX WIXFBR-103 Bedienungsanleitung