ZyXEL Communications WAP6807 Bedienungsanleitung

Positioning the WAP6807

Set up using the WPS button

WAP6807

Gigabit Wireless Extender

Quick Start Guide

Package Contents

Power AdapterDevice Ethernet Cable Quick Start

Guide

DoC

Declaration of

Conformity

Safety Warnings

1/1

within

2minutes

Bottom view

POWER ON/OFF LAN1 LAN2

RESET

POWER ON

Rear Panel

Wait until the power LED

turns steady green

Router

WPS

WAP6807

WPS

Need WiFi here

Room 1 Room 2

Router WAP6807 Clients

WAP6807

Router

Device

Label SSID: DH_XXXXXX

Wireless key: XXXXXXXXXX

WiFi

DH_XXXXXX

Connect

If you need any assistance please call us on 0333 0155156 or

email [email protected]

www.digitalhomeuk.com

1Press the WPS button on the Zyxel MPro Mesh Router. Release it when the Zyxel MPro Mesh

Router WPS LED blinks.

Press the WPS button on the WAP6807 once and release it. The POWER and LINK

LEDs blink amber indicate the pairing is in process.

The WAP6807 LINK and POWER LEDs light up green if the connection is successful.

On your smartphone or wireless client, ﬁnd the Zyxel MPro Mesh Router SSID. Enter the

Zyxel MPro Mesh Router wireless key to connect.

Note: The POWER LED on the WAP6807 indicates if the WAP6807 is ready to join the

WiFi network. The LINK LED on the WAP6807 indicates WiFi link quality and WPS pairing

status. See the LED table.

Green On - Good WiFi connection to the router.

Amber

Red

On - Signal is too strong. Move the WAP6807 away from the router.

Blinking - Connecting to the router. Please wait.

On - Signal is too weak. Move the WAP6807 closer to the router

Off - No connection.

Link

Green

Amber

Red

On - Device ready in Repeater mode.

Blinking - Device booting. Please wait.

On - Device ready in AP mode.

Blinking - Device joining WiFi network. Please wait.

On - Device failed to join the WiFi network.

Off - Device is not receiving power.

Power

Positioning the WAP6807

1. Place the WAP6807 between your router and where you want to extend your

wireless network.

Note: The WAP6807 requires a good wireless connection back to the main router as

indicated by a green LINK status LED. See set up below.

Powering up the WAP6807

2. Rotate the stand on the bottom of the WAP6807 90 degrees.

3. Plug in the power adapter and turn on the WAP6807.

Wait for about 2 minutes. The Power LED lights up steady green.

POWER ON/OFF LAN1 LAN2

RESET

Router

LAN

WAP6807

Use the second ethernet cable provided to connect one of the yellow LAN ports on the

main router to one of the yellow LAN ports on the WAP 6807.

Power on the WAP 6807. This will automatically pair the extender with the main router

and download the correct MPro Mesh configuration.

During the set up the POWER and LINK LEDs blink amber to indicate the pairing is in

process.

The WAP6807 LINK and POWER LEDs light up solid green if the connection is

successful.

The WAP 6807 can now be unplugged (from the power and ethernet cables) and moved

to a location where the extended WiFi signal is required (connecting the power cable at

the required location).

Note: The WAP 6807 requires a good wireless connection back to the main router as

indicated by a green LINK status LED. If there is no LINK light then the WAP 6807 needs

to be moved closer to the main router.

Set up using the Ethernet cable - Recommended

2/2

Installation via the App

1. On your mobile device, go to your App

store and search for: Zyxel MPro Mesh app or

scan the QR code below. Open to download.

3. Once the app has located the router – it will prompt you to login as

admin. Connect to the router as admin (using admin password from the

rear of the router)

2. Switch your router on and open the app.

The app will search for your Zyxel router.

Then Power up your WAP6807 extender

4. Once logged in - click the ’+’ to

add mesh devices (WAP 6807)

6. Pair the router & extender by pressing

the ‘WPS’ button on the Extender

5. Select ‘use Wi-Fi’ scenario to connect

the WAP 6807 extender to the router

7. Wait 2 minutes for the router &

extender to complete the process

A note on positioning of the WAP 6807

The extender needs to be placed close to, but not in the Wi-Fi blackspot,

as it still needs to connect to the router to create the mesh network.

This way it also maxmimises the coverage available.

Andere Handbücher für WAP6807

Andere ZyXEL Communications Extender Handbücher

ZyXEL Communications

ZyXEL Communications WRE6605 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WX Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WHD6215 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ARMOR X1 WAP6806 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WAP6807 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WRE6505 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WRE 2205 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WX3401-B0 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WX3100-TO Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WX3100-T0 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WX3310-B0 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA4231 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA5236 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WRE 2205 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WAP6807 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA4231 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WRE2206 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WRE 2205 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WX3100-T0 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA5236 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA4231 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WRE 2205 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WRE 2205 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WAP7205 Bedienungs- und Wartungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung