ZyXEL Communications P-660HW-T - V2 Bedienungsanleitung

P-660HW-T v2

802.11g Wireless ADSL 2+ 4-port Gateway

Quick Start Guide

Version 3.40

6/2006

Edition 1

P-660HW-T v2 Quick Start Guide

Overview

The P-660HW-T v2 is an ADSL router with a four-port built-in Ethernet switch and IEEE 802.11b/g wireless

capability. The P-660HW-T v2 allows wired and wireless clients to safely access the Internet.

See your User’s Guide for background information on all features.

How to use the included CD

This CD provides multi-media animations that help you set up your P-660HW-T v2.

1On the included CD, click Multimedia Auto Provisioner > Installation Tutorial.

2At the end of the tutorial, click Configuration Genie.

1 Hardware Connections

If you prefer to see a multi-media animation of how to make hardware connections, see the installation tutorial

on the included CD.

1DSL: Use a telephone wire to connect your P-660HW-T v2’s DSL port to a telephone jack (or to a splitter, if

one is already installed).

P-660HW-T v2 Quick Start Guide

2ETHERNET: Use an Ethernet cable to connect a computer to an ETHERNET port for initial configuration

and/or Internet access.

3POWER: Use the power adaptor provided with your P-660HW-T v2 to connect an appropriate power

source to the POWER socket. Make sure the power source is on.

4Push in the POWER button. Look at the lights on the front panel.

•ThePOWER light blinks while your P-660HW-T v2 starts up and stays on once it is ready. The DSL light is on

when the P-660HW-T v2 has a DSL connection, and the WLAN light is on when the wireless LAN is ready. The

INTERNET light is on when you are able to access the Internet and blinks when the P-660HW-T v2 is sending

or receiving data.

• Each ETHERNET light stays on if the corresponding ETHERNET port is properly connected and blinks when

there is traffic.

If any of these lights are not on, check your connections, and inspect your cables for damage. If the lights are

still off, contact your local vendor.

2 Status Page

1In your browser, go to http://192.168.1.1.

2Enter the default password user to go

directly to the Status screen.

If your browser cannot find this screen,

check its security settings. See

Troubleshooting for details.

P-660HW-T v2 Quick Start Guide

3See the User’s Guide for field descriptions of the Status screen.

3 Internet and Wireless Setup

1Open your web browser, and go to http://www.zyxel.com.

Your P-660HW-T v2 tries to detect your Internet connection. Wait for the P-660HW-T v2 to finish detection. If

any other screens appear, follow the directions in the screen.

If the web page opens correctly, your P-660HW-T v2 is ready for you to use. If the web page does not open,

follow the rest of the steps. You should have the information provided by your ISP.

2In your browser, go to http://192.168.1.1.

3Enter the admin password 1234 to set up your internet and wireless connections and security settings.

Click Login. If your browser cannot find the login screen, check its security settings. See Troubleshooting for

details.

P-660HW-T v2 Quick Start Guide

4Follow the directions in the screens.

5Click Go to Wizard setup. Then, click Apply.

6Click INTERNET/WIRELESS SETUP. Wait while your P-660HW-T v2 tries to detect your DSL connection.

7Follow the directions in the wizard. Do not change default settings if your ISP did not provide information.

OTIST

ZyXEL's One-Touch Intelligent Security Technology (OTIST) feature allows you to automatically configure the

SSID and WPA-PSK on all OTIST-equipped wireless clients within range of the P-660HW-T v2.

Note: If you enable OTIST but select Disable wireless security using the wireless wizard, the P-

660HW-T v2 will create a WPA-PSK automatically.

P-660HW-T v2 Quick Start Guide

Enable OTIST only if your wireless clients support WPA and OTIST.

You must enable OTIST on the P-660HW-T v2 and all wireless clients (in any order) within three minutes.

To enable OTIST on the P-660HW-T v2, you can either use the wizard (see Section 3 on page 4) or hold in the

RESET button (see Section 1 on page 2) for three to eight seconds. Do not hold the RESET button in for too

long, as this will reset the P-660HW-T v2 to the factory defaults.

To enable OTIST on wireless clients, click Start in the Adapter screen. The Setup Key is 01234567 by default.

If you have previously saved a setup key on the P-660HW-T v2, use it instead of the default.

For more information, see Wireless LAN in the User's Guide.

Troubleshooting

1If you cannot access the web configurator using Internet Explorer in Windows XP or Windows Server 2003,

make sure you allow pop-up windows, JavaScripts and Java permissions or set the Internet security level

lower than High in Internet Explorer (in Internet Explorer, click Tools > Internet Options > Security >

Custom Level...). See the appendix in the User’s Guide for more information.

2If you cannot access the Internet when your computer is connected to the ETHERNET port, follow these

steps.

A) Check the lights on the front panel. If they are different from what is described in section 1, make sure

the P-660HW-T v2 is correctly connected. (See section 1.) If the lights are still different, turn off the

device, wait a few seconds, and turn it on again.

B) Follow the steps in section 3again. Make sure you enter the correct information. For example, if your

account has a user name and password, make sure you type it correctly. In addition, if you are not sure

which encapsulation your ISP uses, contact your ISP.

C) If you are using a new Internet account, contact your ISP to make sure it is active.

D) If you still have problems, see Troubleshooting in the User’s Guide.

3If you cannot access the Internet using the wireless network, follow these steps.

A) On a computer in the wireless network, open your browser, and go to http://192.168.1.1. If you see the

screen in step 3of section 3, follow suggestions A- Dabove. If you do not, go to the next step.

B) Make sure your P-660HW-T v2 and your computer are using the same wireless and wireless security

settings. Follow the steps in section 3.

Viewing Your Product’s Certifications

1Go to www.zyxel.com.

2Select your product from the drop-down list box on the ZyXEL home page to go to that product's page.

3Select the certification you wish to view from this page.

Andere Handbücher für P-660HW-T - V2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZyXEL Communications Tor Handbücher

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL 10W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications SBG3600-N SERIES Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-661HW-D Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications C4000LZ Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-661HW-D Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HW-Tx v3 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AMG1302-T10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL USG 2000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications N VDSL2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HW-TX Handbuch

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL P1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 662H Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL 10/10 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Unified Security Gateway ZyWALL 300 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 316 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-870H-51a v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL USG 20/20W Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660N-T1A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AMG1302-T series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PRESTIGE 324 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-870HW-51A V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG3925-B30C Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-4100 v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL USG 100 Series Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung

RTA

RTA 460MCBC-N2E Technisches Datenblatt