ZyXEL Communications Prestige 2302R Series Bedienungsanleitung

Prestige 2302R Series

VoIP Station Gateway

Quick Start Guide

Version 3.60

1/2005

Prestige 2302R Series

Overview

This Quick Start Guide covers the Prestige (P2302R) and (P2302RL) models. It explains how to use your

Prestige to make phone calls through the Internet. See your User’s Guide for more information on all features.

The Prestige 2302RL’s lifeline feature adds regular phone services (that do not use the Internet).

The following figure shows your Prestige (A) connected to the modem or router that provides your Internet

connection (B). C is your voice service provider.

This guide is divided into the following sections.

1 Requirements

You need the following:

1Requirements

2Hardware Connections

3Initial Configuration

4Make Calls Through the Internet

5Troubleshooting

Prestige Computer Telephone Broadband Modem or Router

Power Adaptor Telephone Cable Ethernet Cable Note: You should have Internet

access and a voice account

already set up.

Prestige 2302R Series

2 Hardware Connections

1LAN: Connect a computer or an Ethernet switch to this port with an Ethernet cable.

2WAN: Connect a broadband modem or router to this port with an Ethernet cable.

3LINE:(Prestige 2302RL only). Use telephone wire to connect this port to the telephone jack. This is a FXO

(Foreign Exchange Office) port.

4 Phone 1-2: Connect one or more analog telephones to these ports using telephone wire. These are FXS

(Foreign Exchange Station) ports.

5POWER:Use the included power adaptor to connect this power socket to an appropriate power source

(see the User’s Guide for power adaptors by region).

The PWR/VoIP LED flashes during system startup and stays on after the system self-tests are successful. The

WAN and LAN LEDs turn on if the WAN and LAN ports are properly connected (they flash when sending or

receiving data).

Prestige 2302R Series

3 Initial Configuration

In this section you will access your Prestige and configure it for Internet access and making phone calls

through the Internet. Instructions are also provided for configuring the P2302RL to make regular calls.

1Launch your web browser. Enter “192.168.1.1” as the web site address.

2Click Login. See Section 5.1 on page 12

if this screen does not open.

3Type a new password (and retype it to confirm) and click

Apply. Otherwise click Ignore.

The web configurator MAIN MENU screen displays.

4Click WIZARD

SETUP.

Prestige 2302R Series

3.2 Internet Access Setup

If you were given Internet access settings, enter them in the fields. Otherwise leave the default settings and

just click Next.

Note: This screen varies depending on the encapsulation you use.

3.1 General Setup (Optional)

This screen is optional. You can just click

Next.

System Name is for identifying the Prestige.

You can enter your computer's "Computer

Name".

Domain Name: Manually enter a domain

name if you want to. You can also leave it

blank or set to whatever may have displayed

automatically.

3.2.1 Ethernet

Service Type: Use Standard unless you were given

a Road Runner type.

The following apply with the Road Runner service

types.

User Name

Password

Prestige 2302R Series

If you are not using Ethernet encapsulation and are given a username and password, you are using either

PPP over Ethernet or PPTP encapsulation. Enter the information provided.

Select Nailed-Up Connection when you want your connection up all the time (this could be expensive if your

ISP bills you for Internet usage time instead of a flat monthly fee).

To not have the connection up all the time, specify an idle time-out period (in seconds) in Idle Timeout.

3.2.2 PPP over Ethernet 3.2.3 PPTP

Prestige 2302R Series

3.2.4 PPTP

Enter the following if you are using PPTP.

User Name

Password

My IP Address/Subnet Mask

Server IP Address

Connection ID/Name (if provided)

You can leave the other fields set to the defaults.

Prestige 2302R Series

3.4 SIP Account 1 Setup

Note: You should have a voice account already set up.

Fill in the fields with information from your voice service provider. Leave the default settings in fields for which

no information was provided (except if otherwise specified).

Note: This screen configures SIP account 1. See the User’s Guide for details on using the VoIP

screens to configure SIP account 2.

3.3 WAN IP Address and DNS Server

Settings

If you were given IP address and/or DNS server

settings, enter them in the fields.

Otherwise leave the default settings and just click

Next.

Prestige 2302R Series

If you have a SIP account like 1234@VoIP-

provider.com,“1234” would be the SIP

Number and “VoIP-provider.com” would be

the SIP Service Domain.

have no registrar server information, copy

what you entered in the SIP Server

Address/Port fields.

Voice Compression Type: Use the setting

you were given, otherwise leave the default

setting.

NAT Passthrough Type: Use NONE unless

you were told to use a STUN or outbound

proxy server.

Server Address/Port: Enter the STUN or

outbound proxy server’s information.Ignore

these fields if you selected NONE for the NAT

Passthrough Type.

Country Code: Select the country where

your Prestige is located.

Click Finish.

The PWR/VoIP LED turns orange after the

Prestige registers your SIP account.

Prestige 2302R Series

3.5 Speed Dial Configuration

Click PHONE BOOK in the navigation panel

and then Speed Dial.

Speed dial provides shortcuts for dialing

frequently used (VoIP) phone numbers.

You can use speed dial entries for peer-to-

peer calls or SIP numbers that use letters.

Select a speed dial key combination.

Enter the SIP number of the party you will

call and a name to identify them.

Select Use Proxy if calls to this party use

your SIP account.

Select Non-Proxy (Use IP or URL) if calls to

this party use a different SIP server or go

directly to the callee’s VoIP phone (peer-to-

peer). Enter the SIP server’s or the party’s IP

address or domain name.

Click Add.

Andere Handbücher für Prestige 2302R Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZyXEL Communications Tor Handbücher

ZyXEL Communications

ZyXEL Communications EMG3425-Q10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HNU-Tx Handbuch

ZyXEL Communications

ZyXEL Communications ZyWALL USG Series Beilage

ZyXEL Communications

ZyXEL Communications ZyWALL 1050 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660H-D Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-870H Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYAIR B-2000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-661H-D Series Handbuch

ZyXEL Communications

ZyXEL Communications EMG6726-B10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HW Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL 10 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAIR G-4100 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-661HW-D Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 660H Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HN series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HU-Tx Bedienerhandbuch

ZyXEL Communications

ZyXEL Communications P-662H Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HW-T1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-870H-51a v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYAIR B-4000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL 35 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 660W/HW Series Montageanleitung

ZyXEL Communications

ZyXEL Communications P-660HN-TxA Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung

RTA

RTA 460MCBC-N2E Technisches Datenblatt