ZyXEL Communications Prestige 971M Bedienungsanleitung

Prestige 794M

SHDSL 4-Port Internet Security Gateway

Quick Start Guide

Version 1.00

10/2005

Prestige 794M Quick Start Guide

Overview

Use the Prestige for secure Internet access. Refer to the User’s Guide for more information. You need to know

your Internet access information.

The following lists what you need to do:

1Hardware connections

2Internet access setup

1 Hardware Connections

You need the following items:

• One AC-DC power adaptor

• One RJ-45 Ethernet cable

• One twisted-pair (RJ-11) telephone cable

• A computer

Follow the instructions to make minimum hardware connection for initial setup.

1Using a telephone cable, connect one LINE port to a telephone jack with Internet access.

2Using an Ethernet cable, connect a computer to one of the LAN ports.

3Connect the PWR socket to a power source using only the included power adaptor for your region.

4Push in the power button to turn on the Prestige.

1.1 The LEDs

When you connect the power, the PWR LED turns on. The SYS LED

blinks while performing system testing. The SYS LED stays on if the

testing is successful.

The appropriate LAN and LINE LEDs turn on if the corresponding connections are properly made.

1 2 3 4

Prestige 794M Quick Start Guide

2 Set Up Your Computer’s IP Address

This section shows you how to set up your computer to use a fixed private IP address in Windows 2000,

Windows NT and Windows XP. This is ensures that your computer can communicate with your Prestige.

Refer to your User’s Guide for detailed IP address configuration for other Windows and Macintosh operating

systems.

1In Windows XP, click Start, Control Panel.

In Windows 2000/NT, click Start, Settings, Control Panel.

2In Windows XP, click Network Connections.

In Windows 2000/NT, click Network and Dial-up Connections.

3Right-click Local Area Connection and then click Properties.

4Select Internet Protocol (TCP/IP) (under the General tab in

Windows XP) and click Properties.

5The Internet Protocol TCP/IP Properties screen opens (the

General tab in Windows XP). Select Use the following IP Address

and fill in the IP address (choose one from 192.168.1.2 to

192.168.1.254), Subnet mask (255.255.255.0), and Default gateway

(192.168.1.1) fields.

6Click OK to close the Local Area Connection Properties window.

3 Internet Access Setup

Follow the steps below to configure the Prestige 794M for

Internet access using the Quick Start screen.

1Launch your web browser. Enter “192.168.1.1” as the web

site address. If no login screen displays, refer to Set Up

Your Computer’s IP Address on page 3 to set your computer

IP address.

2Enter “admin” as the username. Enter the login password

(“1234” is the default). Click OK.

3You should now see the web configurator Status screen.

Check the WAN status. If the WAN port status is

synchronized with other network information (such as IP

address and subnet mask), then you can access the Internet.

Prestige 794M Quick Start Guide

Otherwise, click Quick Start in the navigation panel.

4In the Quick Start screen, enter the Internet

account information provided by your ISP.

If you are given a username and password, you are

probably using PPPoA or PPPoE Internet

connection.

5Access any web site to test your Internet

connection.

Refer to the User’s Guide for advanced setup

information.

Prestige 794M Quick Start Guide

4 Troubleshooting

4.1 Procedure to View a Product’s Certification(s)

1Go to www.zyxel.com.

2Select your product from the drop-down list box on the ZyXEL home page to go to that product's page.

3Select the certification you wish to view from this page.

Problem Corrective Action

None of the

LEDs turn on

when you

turn on the

Prestige.

Make sure that you have the power adaptor connected to the Prestige and plugged in to an

appropriate power source. Use only the included power adaptor for your region.

Make sure that the device(s) connected to the Prestige is turned on. Check all cable connections.

If the LEDs still do not turn on, you may have a hardware problem. In this case, you should contact

your local vendor.

Cannot

access the

Prestige

from the

LAN.

Check the cable connection between the Prestige and your computer or hub. Refer to Section 1.1

on page 2 for details.

Ping the Prestige from a LAN computer. Make sure your computer’s Ethernet card is installed and

functioning properly.

In the computer, click Start, (All) Programs, Accessories and then Command Prompt. In the

Command Prompt window, type "ping" followed by the Prestige’s LAN IP address (192.168.1.1 is

the default) and then press [ENTER]. The Prestige should reply. Otherwise, refer to Section 2 on

page 3.

If you’ve forgotten the Prestige’s password, use the RESET button. Press the button in for more

than six (6) seconds, then release it. It returns the Prestige to the factory defaults (password is

1234, LAN IP address 192.168.1.1 etc.; see your User’s Guide for details).

Cannot

access the

Internet.

Check the Prestige’s connection to the telephone jack with Internet access. The LINE LED should

be on.

Click Quick Start in the navigation panel to verify your settings.

If required, make sure you enter your Internet account username and password exactly as given by

your ISP. The username and password are case-sensitive.

Andere Handbücher für Prestige 971M

Inhaltsverzeichnis

Andere ZyXEL Communications Tor Handbücher

ZyXEL Communications

ZyXEL Communications p-661hw series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-663HN-51 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PMG5622GA Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-792H Montageanleitung

ZyXEL Communications

ZyXEL Communications P-660HU-Tx Bedienerhandbuch

ZyXEL Communications

ZyXEL Communications VMG1312-T20A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL USG 20W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL USG 2000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AMG1202-T10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL 70 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-220 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications UAG Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications 4381 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL USG-1000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL USG 20 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications EMG1302-R10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Unified Security Gateway ZyWALL 300 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660H-61 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ADSL 2+ Security Gateway Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL USG Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-4100 v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-870H-53A v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HW-Tx v3 Series Handbuch

ZyXEL Communications

ZyXEL Communications LTE5121 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung

RTA

RTA 460MCBC-N2E Technisches Datenblatt