ZyAIR SP-200
5
Table 3 Specifications
Paper Width 58(+0/-1) mm
Paper Length 50 m max.
Paper Thickness 65 um
Dot Resolution 8 (dots / mm) (203 dpi)
Communication Interface Serial (RJ-11)
PS/2 Keypad Interface For optional 16 Key, PS/2 keypad
Dimensions 109(W) × 155(D) × 90(H) mm
Operating Temperature 0 to 50 degrees Celsius
Storage Temperature -20 to 60 degrees Celsius
Operational Humidity 10 ~ 80 RH
Storage Humidity 10 ~ 95 RH
6 Troubleshooting
Table 4 Troubleshooting
PROBLEM CORRECTIVE ACTION
The push-button
LEDs are off.
Make sure that you have the correct power adaptor connected to the printer
and plugged in to an appropriate power source. Check all cable
connections.
If the front panel button LEDs still do not turn on, you may have a hardware
problem. In this case, you should contact your local vendor.
Check that the statement printer is connected to the gateway.
Make sure there is enough printing paper in the statement printer.
I cannot print the
account
information using
the statement
printer. Make sure you set the gateway to require authentication before allowing
Internet access, see the Wizard Setup screens or the Authentication
chapter (refer to the gateway User’s Guide).
