ZyXEL Communications VANTAGE REPORT - V3 Bedienungsanleitung

Vantage Report

Quick Start Guide

Version 3.0

10/2006

Edition 1

ENGLISH 3

DEUTSCH 23

ESPAÑOL 45

FRANÇAIS 67

ITALIANO 89

РУССКИЙ 111

简体中文 133

繁體中文 151

ENGLISH

Vantage Report

Vantage Report collects log entries and traffic statistics from ZyXEL devices and then generates

graphical and tabular reports about network performance and events.

Install Vantage Report on the Vantage Report server (B). Then, use the web configurator (A) to

configure it. (The web configurator can run on a remote computer or on the Vantage Report

server.) Finally, configure the ZyXEL devices (C) to send their log entries and traffic statistics to

the Vantage Report Server. The Vantage Report server collects this information and builds

statistical reports about the network. You and others can look at these reports any time in the

web configurator or in regular e-mail messages.

Overview

1 Preparation - Make sure the Vantage Report server meets the minimum requirements, and

get the Vantage Report server ready for installation.

2 Installation - Install Vantage Report on the Vantage Report server.

3 Login - Use the web configurator to access the Vantage Report server.

4 E-mail Setup - Set up the administrator e-mail address and SMTP mail server settings in

Vantage Report, and test the SMTP settings.

5 Registration - When you install Vantage Report, you get the basic version. You do not have to

(See section 5for more information about versions.)

6 Device Setup - Set up the ZyXEL devices, and add them in the Vantage Report server.

1 Preparation

Check these things before you install Vantage Report.

ABC

ENGLISH

1.1 Check Minimum Requirements

If your Vantage Report server does not meet the minimum requirements, you should upgrade it or

use a different server that does meet the minimum requirements.

1.2 Upgrading from Vantage Report v2.3 or v2.3.1

Use this section to upgrade from Vantage Report v2.3 (2.3.05.61.00) to v2.3.1 (2.3.00.61.01).

Click System > About to view your version details. Then use it again to upgrade from v2.3.1 to

v3.0. If you are already using v2.3.1, use this section to upgrade to v3.0.

1.2.1 Backup Your Data

Backing up your data is optional. The upgrade process automatically brings your data from

Vantage Report v2.3 to v2.3.1 or from v2.3.1 to v3.0. A backup is only useful if the upgrade fails.

You would only back up your data once (in v2.3, or in v2.3.1 if you are already using v2.3.1).

Full Data Backup

If you want to back up all of your Vantage Report v2.3 or v2.3.1 data, copy the content in the

Vantage Report installation folder (such as C:\ Program Files\ZyXEL\Vantage Report) to another

folder. If the upgrade fails, use the copy to overwrite the content in the Vantage Report

installation folder. Then retry the upgrade.

Partial Data Backup

A full backup can take a long time if you have a lot of data. If you do not need to keep all of the

data, you can do the following to only backup the configuration and device list.

1Start Vantage Report v2.3 (or v2.3.1) and login.

Number of registered devices CPU Free Hard Disk Space (GB)

<5 Pentium IV 2.6 GHz 10

<50 Pentium IV 2.6 GHz Twice the number of devices

50-100 Pentium IV 3.2 GHz or faster Twice the number of devices

Operating System Windows XP Professional, Windows 2000/2003 Server

Browser

(Running on Server or

Other Computer)

Internet Explorer 6.0 (Service Pack 1) or later on Windows

Mozilla 1.7.12 or later on Windows

Firefox 1.07 or later on Windows

1024 by 768 resolution

Other Requirements for

Featured Services

SMTP daemon

TCP port 3316 and UDP port 514

ENGLISH

2Click System > Data Maintenance > Configuration > Backup to save your configuration to

your computer.

3Click System > Data Maintenance > Device List > Export to save your list of devices to your

computer.

If the upgrade process fails, you can do a new install of Vantage Report v3.0 (instead of an

upgrade) and manually upload these files to add your data.

1.2.2 Upgrade Vantage Report

Use this procedure to upgrade from Vantage Report v2.3. to v2.3.1 or from v2.3.1 to v3.0.

1Stop Vantage Report v2.3 (or v2.3.1). Also close MySQL and Tomcat (see section 1.4).

2Close any other programs on your computer (the installation requires a computer restart).

3Get the Vantage Report v2.3.1 (or v3.0) package and run the installation program.

4The installer detects Vantage Report v2.3 (or v2.3.1) and displays a screen like the following.

Select Upgrade Vantage Report 2.3 to 2.3.1 (or 2.3.1 to 3.0) and click Next.

5Follow the prompts until you finish the installation.

ENGLISH

6Vantage Report automatically runs the next time your computer restarts. You can also start

Vantage Report from the Windows start menu. The login screen displays. You may have to

clear your browser’s cache and refresh the browser to get the 2.3.1 (or 3.0) to appear.

Repeat the upgrade steps to upgrade from Vantage Report v2.3.1 to v3.0. The upgrade requires

a computer restart. See section 3to login to Vantage Report v3.0 after your computer restarts.

1.3 Uninstall Old Versions of Vantage Report

1If an old version of Vantage Report is running, stop it.

2In Windows 2000, click Start > Settings > Control Panel > Add/Remove Programs >

Vantage Report > Change/Remove. Follow the prompts to remove Vantage Report.

In Windows XP, click start > Control Panel > Add/Remove Programs > Vantage Report >

Change/Remove. Follow the prompts to remove Vantage Report.

1.4 Close MySQL and Tomcat

When you install Vantage Report, you also install MySQL and Tomcat. If these applications run

on the Vantage Report server, make sure these applications are closed before you install

Vantage Report. Follow these steps to check whether or not these applications are running and

to stop them.

1In Windows 2000, click Start > Settings > Control Panel > Administrative Tools >

Services. The Services screen opens.

ENGLISH

In Windows XP, click start > Control Panel > Performance and Maintenance > Administrative

Tools > Services. The Services screen opens.

2If there are no MySQL or Tomcat services running on the Vantage Report server, go to the

next section. Otherwise, right-click on any MySQL or Tomcat service that is running. The

menu that you see above appears.

3Select Stop in the menu. Repeat steps 2 and 3 if other MySQL or Tomcat services are still

running on the Vantage Report server.

2 Installation

Put the CD into your CD-ROM. The following screen appears.

ENGLISH

Click Setup > Vantage Report to start installing Vantage Report. The CD may first extract some

files. Then, the Vantage Report installation wizard appears.

Click Next. Follow the prompts. Before you finish, the following screen appears.

Enter the port number you want Vantage Report to use for web services. Make sure this port

number does not conflict with other services in your network. Click Next when you are ready.

When you finish installing Vantage Report, restart the Vantage Report server.

3 Login

By default, the Vantage Report server starts automatically when you log in to the Vantage Report

server. To access the Vantage Report server,

1Open a browser window, and go to http://a.b.c.d:xxxxx/vrpt, where

ENGLISH

•a.b.c.d is the IP address of the Vantage Report server. If you open the web configura-

tor on the same computer on which you installed Vantage Report, enter localhost.

•xxxxx is the port number you entered during installation. (See section 2.)

For example, http://localhost:8080/vrpt or http://212.100.9.161:9090/vrpt.

The Login screen appears. If it does not appear, see Troubleshooting.

2In the login screen, enter your user name and password, and click Login.

• Default user name: root

• Default password: root

The main screen appears. It is divided into three parts.

Use the device window (A) to select a device. Right-click to add and remove devices.

Use the function window (B) to select a report.

Use the report window (C) to look at and adjust the selected report for the selected device.

4 E-mail Setup

You should have an e-mail account on a SMTP mail server for Vantage Report. You can use an

existing account or create a new one. In either case, you must have the SMTP mail server (IP or

domain name), e-mail address, user name (if required), and password (if required).

A B

ENGLISH

4.1 Set Up Administrator E-mail Address

You should set up the e-mail address for the Vantage Report administrator first. This e-mail

address is used to test the SMTP settings in section 4.2. It is also used for system notifications or

if you forget the password for the root account. (If you forget the password, click Forget

Password? in the Login screen.) See the User’s Guide for more detail.

1Log in to the Vantage Report server. (See section 3.)

2In the function window, click System > User Management. The User List screen appears.

3Click root. The Edit User screens appears.

4Type the e-mail address for the Vantage Report administrator in the E-mail field.

5Click Apply.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere ZyXEL Communications Software Handbücher

ZyXEL Communications

ZyXEL Communications P-662H-61 Kurzanleitung

ZyXEL Communications

ZyXEL Communications Vantage CNM 2.3 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VANTAGE REPORT - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-650R Handbuch

ZyXEL Communications

ZyXEL Communications P-650R Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VANTAGE CNM 2.0 - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VANTAGE CNM 2.0 - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VANTAGE CNM - QUICK GUIDE V3.1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications IPC-3605N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NETATLAS ENTERPRISE - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ENTERPRISE NETWORK CENTER Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-470 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL 2 WG Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Auto Configuration Server Vantage Access Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VANTAGE REPORT - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-360 V2 Handbuch

ZyXEL Communications

ZyXEL Communications VANTAGE CNM Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-470 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VANTAGE CNM Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ENTERPRISE NETWORK CENTER Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VANTAGE CNM QUICK START GUIDE - 1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VANTAGE CNM Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-650R Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VANTAGE REPORT - V3.0 Bedienungsanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

HP ProLiant BL420c Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung