ZyXEL Communications ES1100-16 Bedienungsanleitung
User’s Guide
ES1100 Series
Unmanaged Fast Ethernet Switches
Copyright © 2019 Zyxel Communications Corporation
Version 1.00 Edition 5, 07/2019
ES1100 Series User’s Guide
2
IMPORTANT!
READ CAREFULLY BEFORE USE.
KEEP THIS GUIDE FOR FUTURE REFERENCE.
This is a User’s Guide for a series of products. Not all products support all firmware features. Screenshots
and graphics in this book may differ slightly from your product due to differences in your product
firmware or your computer operating system. Every effort has been made to ensure that the information
in this manual is accurate.
Related Documentation
•MoreInformation
Go to support.zyxel.com to find other information on the Switch.
Document Conventions
ES1100 Series User’s Guide
3
Document Conventions
Warnings and Notes
These are how warnings and notes are shown in this guide.
Warnings tell you about things that could harm you or your device.
Note: Notes tell you other important information (for example, other things you may need to
configure or helpful tips) or recommendations.
Syntax Conventions
• All models may be referred to as the “Switch” in this guide.
Icons Used in Figures
Figures in this user guide may use the following generic icons. The Switch icon is not an exact
representation of your device.
Switch Generic Router Wireless Router / Access Point
Generic Switch Server Desktop
Laptop Analog Camera Printer
Table of Contents
ES1100 Series User’s Guide
4
Table of Contents
Document Conventions ......................................................................................................................3
Table of Contents.................................................................................................................................4
Chapter 1
Getting to Know Your Switch ..............................................................................................................5
1.1 Overview ........................................................................................................................................... 5
1.1.1 Power over Ethernet (PoE) ..................................................................................................... 6
1.2 Applications ...................................................................................................................................... 6
1.2.1 Backbone Example Application ........................................................................................... 6
1.2.2 Bridging Example Application ............................................................................................... 7
1.2.3 PoE Example Application ....................................................................................................... 8
Chapter 2
Hardware Description and Connection.............................................................................................9
2.1 Rear Panel ...................................................................................................................................... 9
2.1.1 Rear Panel Power Connection ............................................................................................ 10
2.2 Front Panel ...................................................................................................................................... 10
2.2.1 RJ-45 Auto-negotiating Ports ............................................................................................... 10
2.2.2 IEEE 802.3az Energy Efficient Ethernet ................................................................................. 11
2.2.3 Front Panel Connections ...................................................................................................... 11
2.2.4 Front Panel LEDs .................................................................................................................... 11
2.3 Hardware Installation ..................................................................................................................... 12
2.3.1 Wall Mounting ....................................................................................................................... 13
2.3.2 Rack Mounting ...................................................................................................................... 14
2.3.3 Mounting the Switch on a Rack .......................................................................................... 15
Chapter 3
Troubleshooting..................................................................................................................................17
3.1 Improper Network Cabling and Topology .................................................................................. 18
Appendix A Customer Support ....................................................................................................... 19
Appendix B Legal Information ......................................................................................................... 25
Index...................................................................................................................................................29
ES1100 Series User’s Guide
5
CHAPTER 1
Getting to Know Your Switch
1.1 Overview
This User’s Guide covers the following models: ES1100-8P, ES1100-16, ES1100-16P, ES1100-24, and ES1100-
24E. The Switch can be used to build high-performance switched workgroup networks.
The following features apply to all models:
• Conforms to IEEE 802.3, 802.3u, and 802.3x wired Ethernet standards.
• 10/100 Mbps Fast Ethernet RJ-45 ports.
• Auto-negotiating Ethernet RJ-45 ports.
• Auto-sensing crossover for all RJ-45 ports.
• Supports N-Way protocol for speed (10/100/1000 Mbps) and duplex mode (Half/Full) auto-detection.
• Supports store-and-forward switching.
• Supports automatic address learning (8000 MAC addresses for ES1100-16, ES1100-16P, ES1100-24, and
ES1100-24E; 1000 MAC addresses for ES1100-8P).
• Full wire speed forwarding rate.
• 802.1p CoS support.
• Inactive link detection to reduce power usage on idle devices.
• Detects cable length and adjusts power usage based on this.
Table 1 ES1100 Series Comparison Table
PORT/SWITCH DETAILS ES1100-8P ES1100-16 ES1100-16P ES1100-24 ES1100-24E
16 10/100Base-TX Ethernet ports
24 10/100Base-TX Ethernet ports
8 10/100Base-TX Ethernet ports
(including 4 FE PoE ports)
16 10/100Base-TX Ethernet ports
(including 8 FE PoE ports)
IEEE 802.3az ON/OFF switch
Power ON/OFF switch
FE PoE ports
IEEE 802.3az EEE
Loop detection
Jumbo frame
Chapter 1 Getting to Know Your Switch
ES1100 Series User’s Guide
6
1.1.1 Power over Ethernet (PoE)
The Switch is a Power Sourcing Equipment (PSE) because it provides a source of power via its Ethernet
ports. Each device that receives power through an Ethernet port is a Powered Device (PD).
The Switch is configured in consumption mode, that is, it supplies the actual power the PD needs.
The Switch supports the IEEE 802.3af Power over Ethernet (PoE) standard.
The Switch supplies power with the lowest numbered port having the highest priority by default. For
example, port 1 has the highest priority, port 2 the next, and so on.
Not all models support PoE. See Table 1 on page 5.
Key PoE feature comparison is as follows:
1.2 Applications
This section provides two network topology examples in which the Switch is used.
1.2.1 Backbone Example Application
The Switch is an ideal solution for small networks where rapid growth can be expected in the near future.
The Switch can be used standalone for a group of heavy traffic users. You can connect computers and
servers directly to the Switch’s port or connect other switches to the Switch.
In this example, all computers can share high-speed applications on the server. To expand the network,
simply add more networking devices such as switches, routers, computers, print servers etc.
Table 2 PoE Comparison
FEATURE ES1100-8P ES1100-16P
PoE Ports 4 (ports 1-4) 8 (ports 1-8)
PoE Power Budget 64 W 130 W
Power management mode Consumption Consumption
PoE Standard IEEE 802.3af IEEE 802.3af
Maximum Power per Port 15.4W 15.4W
Chapter 1 Getting to Know Your Switch
ES1100 Series User’s Guide
7
Figure 1 Backbone Example Application
1.2.2 Bridging Example Application
With its large address table and high performance, the Switch is an ideal solution for department
networks to connect to the corporate backbone or for connecting network segments.
The following figure depicts a typical segment bridge application of the Switch in an enterprise
environment. The two networks (RD and Sales), the standalone server and the computers can all
communicate with each other and share all network resources.
Figure 2 Bridging Example
Chapter 1 Getting to Know Your Switch
ES1100 Series User’s Guide
8
1.2.3 PoE Example Application
The following example figure shows a Switch supplying PoE (Power over Ethernet) to Powered Devices
(PDs) such as an IP camera, a wireless router, an IP telephone and a general outdoor router that are not
within reach of a power outlet. For more information about PoE, see Section 1.1.1 on page 6.
Figure 3 Powered Device Examples
ES1100 Series User’s Guide
9
CHAPTER 2
Hardware Description and
Connection
2.1 Rear Panel
The three-pronged power receptacle is located on the rear panel of the Switch. Refer to the power
supply requirements on the panel.
Figure 4 Rear Panel
ES1100-8P
ES1100-16
ES1100-16P
ES1100-24
ES1100-24E
Chapter 2 Hardware Description and Connection
ES1100 Series User’s Guide
10
2.1.1 Rear Panel Power Connection
Connect one end of the supplied power cord to the power receptacle on the back of the Switch and
the other end to the appropriate power source.
For ES1100-8P, ES1100-16, ES1100-16P and ES1100-24E, use the POWER ON/OFF switch to have the Switch
power on or off.
2.2 Front Panel
The front panel of the Switch includes the auto-negotiating 10 Base-T/100 Base-TX RJ-45 ports and the
LEDs. The following shows the front panels of each ES1100 model.
Figure 5 Front Panels
2.2.1 RJ-45 Auto-negotiating Ports
All the RJ-45 ports in the ES1100 series are auto-negotiating and supports auto-crossover.
An auto-negotiating port can detect and adjust to the optimum Ethernet speed (10/100/1000 Mbps)
and duplex mode (full duplex or half duplex) of the connected device.
ES1100-8P
ES1100-16
ES1100-16P
ES1100-24
ES1100-24E
Dieses Handbuch passt für folgende Modelle
5
Inhaltsverzeichnis
Andere ZyXEL Communications Schalten Handbücher
ZyXEL Communications
ZyXEL Communications Dimension GS-3012F Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications Dimension GS-2024 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications PRESTIGE 128MH Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications XGS2220 Series Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications IES-5000 Series Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications Dimension ES-105A Referenzhandbuch
ZyXEL Communications
ZyXEL Communications GS1350 Series Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications GS1915-8 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications PMG5318-B20B Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications ONU-6040B-21 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications GS2200-24 Series Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications ES-105A v2 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications ZyXEL MI-7248 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications XS3800-28 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications GS1100-8HP Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications Dimension Ethernet Switches Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications GS-105B Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications DIMENSION ES-1016A Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications Dimension GS-1116 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications Dimension ES-108P Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications XGS4700 - FICHE TECHNIQUE Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications GS-105B v2 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications Dimension ES-3148 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications XGS1210-12 Bedienungsanleitung
